Writing of the problems using Firmware Optiarc DVD RW AD - 7540 has 1.422006100200 and XP Home Edition SP3

Similar Questions

• Please HELP me with the problem I encountered with ' Microsoft did-It ' ~ it has stopped working and displated this (?) ;-2147023080 error code

  I am a simple user of PC with Windows XP.  I downloaded ' Microsoft did-It ' and have used it successfully several times until today.

  Earlier today, it simply stopped working in the middle of his analysis or whatever and posted the following to the value of the figures & numbers    ;-2147023080

  Is it a CODE of ERROR or something?  How can I solve this please?

  ALSO:  I also got another code (or whatever you call) showing following error (0 x 0) unk

  Can someone help me understand this?

  When I went through the trouble of looking up for the first time for a "fix", good old MVP "STEVE" led me to a sales PITCH for some DRIVERS REPAIR download I had to ENROLL in the first, while THEY WANTED ME to PAY THEIR MONEY BEFORE HELP me

  Sincerely grateful for your help.

  Sherry

  Hi Sherry,

  Can I know what question faced you that prompted, allowing you to run the Fixit?

  The question you posted would be better suited in the Forums of Microsoft Fixit. I would recommend posting your query in the link below.

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  Good day!

  Answer please if you have any questions.

• Error code 37. I have a model CM5688E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has enough work. How to operate again give idea? The computer is less than 2 years.

  Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium.  My Optiarc DVD RW AD - 7203 has left a couple of weeks of work.  Anyone have an idea how I can get it working again?

  Hi Sunday47,

  There are many causes of Code 39 errors:

  ·         A required device driver is missing.

  ·         A required binary file is corrupted.

  ·         There is a problem with the file I/O process.

  ·         A driver that refers to an entry point in another binary file cannot load.

  I suggest you try the following steps:

  Step 1: Run the fixit available in the link below

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If the problem persists,

  
  Step 2: Uninstall and reinstall the drivers.

   

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System and then click on Device Manager.

  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  5. When you are prompted to confirm that you want to remove the device, click OK.

  6. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Click here for more information.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I use Outlook and have the problem that when I send an email that has a picture from my PC to a friend could a Mac.

  I use Outlook and have the problem that when I send an email that has an image of my PC to a friend risk a Mac, they don't get the image; just text! Is - this way I send or is the problem with the Mac user?

  original title: sending email JPGs from PC to Mac

  Try attaching one instead and see if they get the picture.  It is possible that their e-mail program cannot correctly interpret the HTML message format.

  Steve

• I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

  I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

  Thank you
  Peter

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
  set up the network.

  ====================================

  Or you can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should.

  Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.

  Someone in the building uses Apple can 790-795 network this person hack me and who is?

  Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.

• Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  You can do this for Vista (and), but not for Windows XP.

  You want to explore other ways to improve your performance? If so, you are in the right forum. :-)

• What is the problem using Throwable in production code

  Hello

  I read everywhere that you use Throwable to print the call stack when debugging. Now, my question is what is the problem if I use throwable in my production code as well? What is a drawback with Throwable?

  I like it! It gives me an error message and the name of class. It will be a nightmare for me to catch possible exceptions in my method.

  Another question, if Throwable is not good for production code, how do I change my code of Throwable individual exceptions when passing code debugging in production?

  Any advice will be highly appreciated.

  Thank you very much

  Nitin

  no problem in usage, but the expected exceptions should be taken by the defined catches.

• Failures/intermittent problems with Optiarc DVD +-RW AD - 5560 has

  I have an Inspiron 1720 laptop running Windows Vista. June 1 the DVD drive was declared missing. The Device Manager said "this device cannot start. Code 10. " Looking for solutions? "Could not load driver software. A chat with technical support solves the problem by taking control of my computer and do something in the system registry.

  Two weeks later I couldn't eject the CD that had just been snatched. Restart solved that problem.

  Today, the original problem described above reappeared.

  Technical support advised that, so that they can keep fixing these problems Dell will not replace the disc if the warranty does not expire until October.

  Everyone knows the same problem with this drive and what do I do to fix this?

  
  

• Log on to the problem - used temporary profile

  I can't open a session as administrator or my usual profile in windows 7 Home Edition. I get the newspaper on the screen, then when he selected takes me for a temporary profile without my documents, Favorites, etc. Most of the programs seems to be there. I tred restoration systems, but it does not allow me to do saying error. Turning off not good either. Any ideas?

  Hello

  This is probably due to a corrupt user profile. Corruption could be simple damaged files or due to the partial failure of hard drive.

  The first thing you can do is backup all data of the suspect profile to another device as memory stick, USB hard disk or enternal. It is where the hard drive is faulty and you need to protect your data against the possibility that it will fail completely.

  Your data will be most likely contained in records under C:\Users\, for example, if your login name is Sean, the issues will be

  C:\Users\Sean\Documents

  C:\Users\Sean\Desktop

  C:\Users\Sean\Favorites

  etc.

  Of course, there is nothing store you your data in non-standard places, with whom I can't help except to advise to search for him if you don't remember where are these places.

  Once your data is safe, you should check the status of your hard drive, see...

  • Click Start
  • Click here to open the computer
  • Right click on your C drive, and then click Properties
  • Click on the Tools tab
  • Click check now...
  • Check both boxes, and then click Start
  • When you receive a message "Windows cannot check the drive while it is in use", click schedule disk check
  • Click OK
  • Restart your PC

  .. .the hard drive manufacturer will likely utilities perform drive diagnostics too.

  Finally, if the disk hard drive remove OK, creates a new user and copies the data from your backup in the new profile, see...

  http://Windows.Microsoft.com/en-GB/Windows7/fix-a-corrupted-user-profile

  .. who can help.

  Tricky

• Optiarc dvd rw ad - 7561 has ata device

  My optiarc dvd drive does not work with dvd + R DL. Is this normal?

  ostlokla1

  Hello

  It should work with both + and - R discs.

  It's the version of HP of its description:

  Original HP AD - 7561a Support LightScribe technology 8 X DVD +/-R/RW/RAM DL writer

  =======================================================

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Burning at low speed, or by using the master could help. Maybe a CD/DVD cleaner
  Help.

  CD have a tolerance + - and you can write on the edge outside their tolerance. They
  may be released but it is usually more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  --------------------------------------

  To solve the problems:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Optiarc DVD RW AD - 7910 has ATA Device

  Hello
  I have an Optiarc DVD RW AD - 7910A ATA Device. last week my laptop stopped recognizing it & after running the fix auto program it did nothing... can someone please help me?

  I use a laptop Lenovo T61

  Windows 7 Ultimate (X 32).

  Thank you

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• What is the problem with my Media Player? He know connect a burner and restart.

  Media player, connect a burner and restart.

  Hi grandmomof6,

  1. have you tried to burn a DVD in Windows media (WMP) Player recently, and then the problem started?

  2. what version of WMP is installed on the machine?

  Make sure there is no files in Windows Explorer or notification area displays as pending of engraving. If so, delete the cached files, and then try to restart Windows Media Player and check.

  a. open Windows Explorer and right click the CD\DVD drive

  b. click on open and check if you have an option that some files are waiting to burn or write.

  c. If so right click on this option and select Remove.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Gateway M series Optiarc DVD RW AD-7640 has ATA Device read any CD/DVD

  I have a gateway M series, and my dvd rw optiarc dvd rw ad-7640a ata would not read any cd or dvd, pls help!

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Error, device ata Optiarc dvd rw ad - 7563 has

  I just noticed this problem. When I went to download the software for a new printer he wouldn't have anything as much as any screen or formatting. The error is OPTIARC DVD RW AD - 7563 ATA DEVICE A. I tried to fix it in the DEVICE MANAGER but repeat me that it is not properly installed. However when I look in Device Manager it says I have the latest software for it. How can I fix it?

  Hello

  Try this - Panel - Device Manager - CD/DVD - RIGHT click ON the drive - UNINSTALL - REBOOT

  This will refresh the default driver stack.

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after startup

  Hardware devices not detected or not working - A Mr Fixit

  http://support.Microsoft.com/GP/hardware_device_problems

  Normally the above will solve this problem otherwise working your way down through them, even if you did

  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  I hope that these AIDS

  Mark <> Microsoft Partner