WRT 120N cannot be detected

Similar Questions

• SIM card cannot be detected on thinkpad 10

  I have 10 Windows installed on my thinkpad 10 PN 20C3001QAU Australasian model. Sierra mobile network is installed. The system does not detect the SIM card installed, but the Device Manager indicates that the mobile system works properly. I tried the SIM from my phone, but with the same result. This is the first time a SIM card has been inserted in this cushion. Wireless details are

  Model: EM7345 4G LTE

  Firmware: FIH160_V1.1_Modem_01.1349.12

  Type of GSM network

  Help with this problem would be appreciated gratefuuly.

  A problem has been identified where a SIM card cannot be detected in systems equipped with an adapter WWAN of EM7345 on Lenovo ThinkPads. For this particular issue, no SIM card is never detected.

  For help on this issue, please contact the Service of Lenovo for support and Service TIP #SF16-T0076 of reference / HT # HT501750.

  Thank you

• Satellite L850-13R - internal video card cannot be detected

  Hello guys,.

  Two months ago I bought above mentioned model and I have problem with his video card Intel internal - Intel HD 4000. The problem is that it cannot be detected.

  Someone with the same model has the same problem?

  Cannot be detected?
  According to the specifications of the laptop this model comes without an operating system.
  What operating system you have installed?
  Have you tried installing the driver from the Toshiba download page?

• Aspire D255E the network proxy settings cannot be detected

  I have asked about this before, but can't find my original message. My netbook was working fine until suddenly I lost connectivity.  A pop-up window on the logo of connection in the status bar - bars with a red X on them - says the network proxy settings cannot be detected. When I click on the small wrench, he also detected, but there is a yellow triangle with an exclamation mark inside.

  I tried the fixes in the field of netbooks this site troubleshooting, but they did not work.  Click on the logo of connection, it says that Windows cannot automatically detect the network proxy settings. Under detection details, it gives the file 1A40D7A3-7CDE-40F4-195E4ADD6327 name. Diagnose.Admin.0.etl for the network diagnostics log. for other network configuration and newspapers, it is NetworkConfiguration.cab.

  When I login, the popup says that it cannot connect to the Service Notification of events system; also review the system event log. I tried looking for those, but cannot find them.

  Tried the cat, but it has expired. It is free, BTW? I don't have a credit card.

  I also get a message saying that I need to change my Windows Update settings. When I click it, I click on the automatic installation highlighted, but get this message.

  How/why is this happening and what can I do to fix this and prevent this from happening again?

  I really need this issue to be fixed as soon as POSSIBLE. Thank you.

  Thank you, Philetus, I'll try that.

• WRT 120n problems of mac address cloning

  Hello everyone .

  After that I bought my linksys wrt 120n some time ago, I had problems with my pc mac address cloning. I wasn't able to do. The cloning option tab become gray and could not be selected. Prior to that, everything worked fine for a month or two. I wouldn't change anything.

  Reset for 5 seconds does not solve the problem, unplug and plug back or bring back the default values does not work either.

  I'm updating to the latest firmware due to other problems of people with 1.0.0.4 version (mine is default 1.0.01) and power Cycle has not helped.

  I decided to contact linksys chat based help and I got solutiion of the consultant that solved the problem. I thought that I put it here in case someone else got the same problems...

  Solution below in the next post.

  Solution:

  1 make sure that the computer is connected to the router with cable (cable connectivity.---> cable modem RJ45---> > port the router Internet---> > port Ethernet 1 of the router to the computer; the connection will be the same only);

  2. power should be on;

  3 reset the unit: -.
  -Press and hold the button of reset for 50 seconds.

  - Then disconnect the Dungeon can now hold the reset for 30 seconds.

  -Plug back in the power and keep the button of reset for 30 seconds.

  -Release the reset button. ;

  I'll just add that I used only the wired connections don't wan, on windows xp. I also noticed that the base of the router configuration browser has problems sometimes under some browsers other than IE...

  Hope I helped someone. See you soon.

• When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  original title: battery problem

  To all,

  When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  I unplugged the battery taken power and put it back it, that did not work,

  The battery is fully charged and when I check the battery in the control panel for the strength of the battery, the system is telling me, it is fully charged and there is nothing wrong with my battery.

  Then I ask why I get this error when I start my computer.

  Can anyone help me on how can I do to fix it.

  Thank you

  Russell Froedge

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• integrated dv5 webcam cannot be detected

  Hello! one, please advise advise how to solve this problem. I have computer dv5-1235dx again its built-in webcam cannot be detected by my computer. Please help me solve this problem...

  Hello

  bryje wrote:

  Hello! one, please advise advise how to solve this problem. I have computer dv5-1235dx again its built-in webcam cannot be detected by my computer. Please help me solve this problem...

  The webcam never worked before?

  Are you sure that there is a webcam installed?

  What operating system is installed in your laptop?

  In Windows 7 in the search box, type devmgmt.msc to call the Device Manager. The following image shows where the Device Manager is the webcam on my PC.

  

  Is there a device that has a yellow exclamation in imaging devices your device manager n? Which would indicate that there is no driver installed.  Which can be fixed easily. If there is no webcam device in Device Manager, you can force the Add Hardware Wizard to search for the device. Make a right-click any device and select 'check for changes on the hardware.  If no webcam is found, then I suggest you read this thread. There may not be a webcam installed in your laptop. Of course, which will depend on your answers to the first two questions.

  Best regards
  ERICO

• iPhone 4 iOS 9.3.2 | Wi - Fi is not grayed out, but available networks cannot be detected!

  Features: iPhone 4S 64GB | 9.3.2 iOS (13F69) | Greece

  Hello team Apple, I'm Athanasios * Thessaloniki! I want to tell you about my problem which is this a while now, and I can't find a useful answer.

  We will explain my problem:

  Suddenly, one day, after I have updated to iOS to 9.2.1 version, wi - fi was not able to detect ANY network, which has been previously connected successfully. I already searched Google my problem in the forums of geek famous Apple, Apple support page (Yes, here), YouTube, but a solution absolutely nothing for her. As the Wi - Fi connection button was not gray, I assumed that it wouldn't show the antenna, such as moving after falling or something similar. I have never had any problem of high or low, such as the iPhone, not too hot or too cold. I tried to reset the network, put on the market settings and disable certain services that have been proposed to do in the forums, in many combinations different by trial and error-n method and even restored the iPhone throughout the system by default, and still nothing is resolved. I double checked the routers themselves, their settings and everything. All other devices are connected, with the exception of my iPhone (because cannot detect it). IPhone of my father (it's the same as mine) is also connected. BUT, as I said before, my iPhone cannot DETECT wifi networks.

  According to some scholars, put my iPhone in the refrigerator for 30 minutes and getting Wi - Fi working again, IS NOT a SOLUTION for me, because I don't know what could happen to the chips inside. In general, I do many reflow repairs to chips in laptops (made with success, of course), but this... I refuse to do it for a reason any.

  This is why I installed Apple Configurator 2, follow the steps below and save the file log and no information, it could be exported from the application. I don't know what else to do. Please if you could tell me what the log file (if the reason lies deep inside the info), as long as you or me to find a solution. I can't determine if it comes to iOS, or material. Even now, on the last version of iOS, the problem is not resolved.

  A VERY BIG THANK YOU FOR YOUR PATIENCE. PLEASE SEE WHAT YOU CAN DO. AN IDEA DIRECTLY FROM YOU WOULD BE USEFUL.

  ========================

  Steps, what is in the .log file is:

  1. turn off: Wi - Fi

  Bluetooth

  Use of data

  Activation: Flight Mode

  (in general, everything is turned off)

  2. TURN OFF THE PHONE

  3. TURN ON THE PHONE

  4 turn on: Wi - Fi, and Bluetooth, flight mode (off... dial-up cellular is enabled), use of data

  ========================

  PS: Here is the link of my log file (I have downloaded on my Dropbox account)

  < personal information under the direction of the host >

  Hi, this is a user to user forum only. I read your post and offer two comments. Please do not put your phone in the refrigerator, which is not an accepted solution. Secondly, iPhones are not intended to be served by our users. I know you've tried several of the steps below but please take a look at them again. If after #8 (restoration of new, not backup) the phone still does not work, your best choice would be to take on Apple Store or authorized dealer for evaluation.

  Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Satellite Pro A120: SD card cannot be detected.

  Whenever I insert a card SD in my Satellite Pro A120 Windows does nothing, nothing changes, it's as if I don't plug.

  I found that if I reinstall the driver of SD card while the card is connected, then it will be detected, but windows doesn't detect not when he then disconnected, and it will be not at all detected the next time you start. Basically, it seems that the laptop cannot tell when it's connected or be contracted.

  All the correct drivers are installed, and I use Windows XP Home Edition.

  Someone had the same problem / got ideas?

  What size SD card do you use?
  As far as I know the Satellite Pro SD card support SD cards up to 1 GB max
  Please check if your SD card is compatible!

• OfficeJet 4650: New HP Officejet 4650 cannot be detected in the wireless

  Have tried to install this printer with the 8.1 Windows wireless configuration wizard and Windows 10, and none of them can detect this printer on the same network. Manually enter that IP address of the wizard is not working too.

  I also changed the printer IP of the DHCP server to static, same thing.

  The only way it can detect the printer is through windows 'Add a device' where it appears a list of the devices in which 2 printers named with "Direct-*-4650". "» Not sure one to choose. Choose anyone of them will allow you to connect to this printer once. Next time, this printer can print either.

  An observation is for Officejet 4650, he cannot be crazy; Unlike my other Deskjet 3050 a, its IP address is to ping requests.

  Run the printer doctor tool too, and just, it freezes and sucks CPU forever without getting anything in return. What tool joke.

  Please help me if possible.

  Thank you

  Just return to the issue with the solution. After working with HP support, we discovered the root cause. At home, I used extensions of TP-Link powerline to basic wireless network and ending up with 4 more wireless relay networks that are all on the same subnet and masks. Home, the devices are connected to different networks wireless in places and they have no problem to connect to each other.

  However, this printer 4650, if the Setup program on one basis other than directly connected to the router network, it will be inaccessible. It can be reached from the core network; and all devices on other networks can reach it after that. Another printer, HP 3040 A, has no question also and can be installed on any network.

  Seems a limitation of 4650 printer!

• Cannot Auto-Detect Simulator.

  I'm frustrated by the development of BB10 because the controller and IDE is unable to automatically detect the simualtor. What can I do to solve this problem

  -Adil

  The IP address must be displayed in the lower right part of the Simulator.  You can also look in the settings->-> network.

• New installation cannot network detection

  I had to reinstall my Windows 7 Home Edition 64 on my laptop with 9 Parallels Bootcamp partition following an upgrade of the OS. This laptop is connected to my home network via an Ethernet bridge with two different Mac and a Windows 7 PC.

  Installation as described worked perfectly on my home network, in particular with the office also runs Windows 7 Home Edition 64 before the reinstall.

  On my laptop (correctly working over the Internet through the same Ethernet Bridge), when I go to the Control Panel HomeGroup and click on it, it tells me that there's no homegroup (and me to create an offer only no option to join a).

  On my desktop PC, when I go to the same homegroup, there is a (which has been existing for two years) and I have the password for it, but I can't use it on the laptop because it does not detect. Passwords are rejected on the advanced sharing options, and I hasten to add that, of course, the ' discovery network is ON "on both computers.

  In the computer laptop system properties, I selected as in the PC of WORKING group.

  Any information on how to resolve this situation would be really appreciated!

  Thanks in advance.

  Finally, I found a solution to make my software work on the network WITHOUT being able to restore the residential group (see above). I could write the paths to the files, I needed the PC, and surprisingly the PC will appear in the selection of network drive tree! But before you write paths, no way I could select them as you normally would by selecting them.

  So I'm happy, my software works, but my network on the Windows partition not although everything seems to be normal (it's what network stores tell me too)...

• Can't burn a downloaded file on the disk because the length of it cannot be detected

  I downloaded music on my computer, want to burn to disc. but can not because it is said that Windows Media can not detect the length of the file. He suggested I should play the track and this could help, but unfortunately it didn't. Any suggestions?

  This problem happened to me before, I went to another call for program Disc Creatorof DVD burning, it solve my problem, you can get it for a try. Write me if you need further assistance.

• "windows 8 cannot automatically detect the network proxy settings."

  Several times a day on my new Windows 8 I get the message "Windows could not automatically detect the network proxy settings." I then use the troubleshooting tool that detects the parameter and am back in business, but why should I have to do every hour or so? After being on the Windows Support, the same problem is triggered, but responses are always to Windows 7, nothing about Windows 8.  Sometimes the message is "the default gateway is not available. Using a wireless connection and had no problem at all when you use Windows 7, it's only been 8 download it has become a pain. Anyone out there have the answer please?

  Hi Chris,

  Thanks for posting your question on the Forums of community of Microsoft.
  Description of the question, we understand that you get "the default gateway is not available" error when access wireless network.
  Let us move forward and help the issue.
   
  If you could answer a few questions that would help us resolve this problem:
  1. don't you make changes to the computer before the show?
  2. What is the brand and model of the computer?
   
  Here is a link that you can follow to resolve the problem:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-za/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• My USB (Sony MicroVault click 8.0 GB) cannot be detected by the computer.

  * Original title: SONY usb does not

  Hello

  My USB (Sony MicroVault click 8.0 GB) can not be detected by the computer, still flashing the LED on the USB key.

  How can I get my files on the USB key? They are quite urgent!

  I've been to rename the disc, with a program update driver already, but the computer shows no media in the drive.

  Please offer your generous help :(

  Hi Markus,.

  We apologize for the inconvenience that this may cause.

  Quickly, I would like to ask you a few questions. Please answer the following questions to help you best.

  1. The devices works fine on other computers?
  2. Have you tried to connect the unit to different USB ports?
  3. What is the device detected in Device Manager?

  I would have you try these methods and see if that fixes the problem.

  Method 1: Run the hardware troubleshooter.

  You might be able to solve certain problems by running a convenience store will automatically fix some common problems with the hardware.

  a. press Windows + W keys on your keyboard.

  b. type Troubleshooting , click Troubleshooting.

  c. click on see all.

  d. click on hardware and troubleshooting of devices.

  e. click the Next button to run the troubleshooter.

  Method 2: Check if it the device is recognized in Device Manager.

  a. press Windows key + R, type devmgmt.msc and press ENTER.

  b. in the Device Manager, check if the USB drive is recognized and that there is no exclamation point .

  Method 3: Uninstall and reinstall the USB controllers.

  a. press the Windows key + X , and then select Device Manager.
  b. expand De Bus USB controllers and right-click on each USB controller.
  c. Select Uninstall.

  Restart the computer. It will be re - install the USB drivers. Check whether the problem is resolved.

  If the problem persists, you can check if the device is compatible Windows 8.1.

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=1219

  For more information, see the link.

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Keep us informed on the status of the issue. We will be happy to help you.