WRT 1900ACS removes wireless LAN file transfers and internet connection

Similar Questions

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• Why all my files disconnect and re connect is no longer?

  Why all my files disconnect and re connect is no longer?

  @

  Hi Meg, thanks for your response. The files were imported from an SD card reader and I worked with them for weeks.

  As of this writing Adobe has reconnected the files automatically, YES! I think what happened was that I unplugged a disc, which was totally unrelated with

  in the project, but it was not properly disconnected. So I guess that Mac did not like this gesture...

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• wireless network and Internet connection problem

  I had a yellow triangle on the network icon, but I fixed,

  now no icons on the network icon

  

  ____________________________

  

  __________________________________

  

  ___________________________________

  

  but same problem

  I re - install the adapter wireless but same problem, I can not open any site!

  Same problem,

  Thank you

  Please restart your computer, wait 30 minutes for the system to operate before downloading more information so that the impact of the changes can become apparent.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• How can I remove Funmoods from my Firefox and Internet explore

  Somehow, in another installation, Funmoods appeared in Firefox and Internet Explorer, and itself has instilled as my default homepage. I was able to change the home page in the browser, but am unable to do this in Firefox... I have HP Pavillion P2-1120PC with Windows 7. Problem, I am unable to find the Tools option in Firefox version 13.0.1 and I am unable to renovated this add on. It does not appear in the list of programs or Program Files in the Uninstall list.

  Hello

  Hope this helps:

  http://funmoods.com/English/FAQ#A8

  Kind regards.

• EA4500 - a wireless device of many with internet connectivity problem

  Hello

  I wonder if anyone can comment on a subject that I have with a (a) wireless on my home network devices.  The problem is that a Dell laptop knows slow or no internet connectivity using wireless at all.  Sometimes 1-2 minutes to load one page, other times the message 'not able to display the Web page' dreaded.  That's using Ethernet.  I have another laptop (brand/model exact even) and it has no problem.  I also have a Macbook Pro and other IOS from Apple (iPod/iPad) devices which are very good.  Several connected Ethernet devices are very good as well.  The laptop in question had no problem with my previoius Linksys devices, which are a BEFSR41/WAP55AG and a WRT-54GS v2.  This laptop was the first day or two on the EA4500, but something happened that causes this problem.  I had to add the WAP55AG on my network so my son is happy again, but my plan was to dismantle the other devices.  Suggestions regarding what I can do to fix this are greatly appreciated.

  Thank you.

  EA4500 Firmware v.2.0.37

  Laptop Dell Inspiron 15 w/Intel Centrino Wireless N1030, 1 x 2 bgn (2.4 GHz) + Bluetooth

  Hello

  Thanks for the suggestion.  I tired who, but it did not work.  I then called Dell and they found that the wireless adapter on battery power has been set to maximum power saving.  Changed for maximum Performance and it's been very well.  Fortunately there is nothing wrong with the router.  Thanks again for the suggestion.

• Satellite Pro C665 and internet connection problems

  Hi, will try and give as much information as I can, so sorry for the long post.

  I bought this new laptop in August is so very old, I connect to the internet with modem USB 3 G telstra and a cycle of 3 weeks he began to abandon the connection within 30 seconds approximately.
  The blue LED on the identification of the USB modem still flash, it has a connection, but I would get the yellow explanation mark on the icon of internet connection in the task bar.

  Now, the only way to recover the connection must close the connection of Telstra, unplug it, plug it back in and reconnect, a few times I have to reboot and will have to go through this routine 5 - 6 times and sometimes up to 10 attempts before I get a stable connection.

  So first I thought it might be the USB modem, so I got a replacement of telstra, but made no difference, then I had a replacement sim card and still no luck.

  Then I did a new install of Windows 7 and installed all the current updates, still no go.

  I then bought a wireless router to eliminate the USB connection and still have the same question.

  Sometimes it can be very frustrating trying to get a solid connection, but once it gets a good connection, it will stay connected for hours without any problem

  I'm not an expert with computers, but can usually find a solution to problems of software, I have, but that left me speechless and I think I've covered most of the region to address this.

  Thanks for your time.

  Unfortunately I can't say anything on Telstra 3 G USB modem. Toshiba doesn't support third party hardware, software and does not offer any kind of support.

  I put t know where you got this USB modem but I m wondering you didn't visit their store and test in functionality it bring your laptop with you. The people who work there could make inspection on site.

  I also put t know why you have this problem at home. Your router is not known to us, but is there a difference when using WLAN secure or unlocked and without password?

• Windows 7 - updated interfere with anti-virus and Internet connection

  Windows updates frequently stop my internet connection. It's using windows7 with a wireless router and a cable modem broadband. Updates have also stopped my work (Norton) security protection. What can I do to stop what is happening or is it Microsoft?

  Hello

  1. when exactly it happens? After you install a particular update?
  2. this happens whenever you install a windows update?
  3. the updates you are trying to install? http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Step 1: You can try to install the windows updates in the clean boot state and check what is happening.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps in step 1 in the article to put your computer in clean boot mode.

  http://support.Microsoft.com/kb/929135

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:
  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• WRT54GS Wireless Router recently started disconnecting Internet connection after 9 months

  Hello, I have read some and see that it is a problem common but of are to be decided.

  I have a Lynksys WRT54GS with the latest Firmware update v7.2 27 July 2009 (FW_WRT54GSv7.2_7.2.07.013_EN_20090727)

  I ran 2 desktop computers as well as my DVR security by the security cameras for remote monitoring, also portable hook upward wireless sometimes as well without any problem using this router for over 9 months now with no problems until the last few days... I never log out and leave it on 24/7 for 9 months without problem and now recently I had to pull on the power cord from the back of the router and reconnect it to re power on the router to establish an internet connection.

  Now the last 3 days the router loses its internet connection each monutes a few... hours... the time it disconnects are random moments and I have the programs I need to run all day but can't because the router loses its connections...

  I applied the firmware again... re factory - configure the router... rebooted the computer... tried cloning the MAC address... all seem to be doing nothing... the same problem still exists.

  All of the minutes or hours so it disconnects the interent.

  I ran the office computer directly to the DSL Modem and I'm online very well with a desktop computer without disconnections for hours and hours (18hrs to date is not a problem), so I know this isn't the access provider. I had this problem I believe before with a previous Lynksys router and then bought it and now after this short period it seems to do the same thing again with this one. What a pain in the but.

  All solutions and more...

  Re application firmware... then

  factory re set the router... then

  re - connect computers as if it were a new router... the MAC address cloning? Geezus... it must be one simple solution other then buy another brand router.

  Thanks in advance...

  What is the IP address, find the modem directly...? Connect the computer directly to the modem and check the ip address? What is the ip address, you get the router...?

  Try the following settings on the router and check the connection...

  -Change the channel to 11-2 wireless, 462 GHz

  -Under the Advance wireless settings tab, change the tag at 50, Fragmentation threshold to 2304, interval RTS threshold to 2304

• printer deadline on 1 computer in local network and Internet connections

  Windows 7 ultimate 32 bit running. Just a week ago I experienced a problem to stay connected to the internet and my printers. There was the time I surpassed all in answering emails, times when I was on FaceBook, e-mail does not seem serious if I am in outlook or on the host IP page. The only remedy I have is to restart and start all over again. I tried to use "last" of 2 months without change. Any ideas on what is the cause? Should I reinstall windows? Can I do a repair said from another machine running ultimate? Not sure that I trust a repair disk from the machine that is time.

  -the dangerous Dan McGrew

  Expired A while trying to ask 5 minutes ago.  Grow old...

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problems with an internet connection in Windows 7.

  I imagine the inconvenience that you are experiencing. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Intermittent problem with IP addresses and internet connections dropped

  Once a day or so my PC (Win7) will not be able to access the internet. Connection just drops. I use DHCP for IP addresses.

  As far as I can see in the Event Viewer I get these types of errors "the address lease IP 192.168.1.64 for the network card with network 0x406186808C4C address was rejected by the 192.168.0.1 DHCP server (the DHCP server sent a DHCPNACK message)."

  My local network is simply: PC-online router (Cisco E1200)-online internet (modem Siemens SpeedStream 4100 DSL)

  "When this happens, we run ' ipconfig - release 'then' ipconfig - renew." This usually fixes the problem. Sometimes, this does not solve the problem, and we need also the modem power cycle. In a few minutes find us the internet connection. It's nice to have a manual correction, but we want to solve this problem to happen... as is the engine of our family crazy...

  The address LAN IP of the modem is set to 192.168.0.1

  The address LAN IP of the router is set to 192.168.2.1

  When things are running OK, I usually see it in the ' ipconfig-all the ' results: = 192.168.2.147 IPv4 address (Preferred) [but the IP numbers change slightly] my understanding is that see "Present" in the result is a good thing (but I don't know why...).

  Any thoughts on what is happening? and how to permanently solve this problem?

  I'm also confused on IPv4 and IPv6. Should I be concerned with any information of IPv6 in the ipconfig-all the results?

  Thanks for the help

  Talked with the ISP (ATT). Zig - zag, you were on the problem. I had both modem and router set to DHCP mode... so I had some conflicts. The solution was to define the "bridge mode" dsl modem and configure the router to "PPPoE mode. Everything works now. Thanks for your help.

• Bluetooth network and Internet connection sharing problem

  I am putting in place a network via Bluetooth between two computers later with Toshiba Stack installed and to share the Internet connection with the second computer.

  On the computer of trees I put Internet connection sharing, and for this reason, it automatically assigns addresses TCP/IP for the Bluetooth Personal Area network (192.168.0.1).
  On computer 2, I put everything to get it automatically. Firewall (Kaspersky) disabled.

  When I connect 2 Bluetooth devices, everything looks fine, the 2nd automatically gets the IP address, I can ping both computers and Internet works also on the 2nd computer, for a few seconds! After that, it appears as the 2nd computer is disconnected from the network... what could be the problem?

  In the case of the observer under the System tab, I found information like these:
  2nd comp:
  The system has detected that the network \DEVICE\TCPIP_{E44D18EB-91F5-4 adapter has been connected to the network and launched a normal operation via the network card.

  The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.

  and the 1st model also appears this:
  The system has detected that the network Bluetooth adapter... Area Network - Packet Scheduler Miniport has been disconnected from the network, and the network adapter configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

  In your case, I would look at the following Web site:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  It lists the following document:
  "Internet on PDA via PAN using Notepad as a gateway."
  In your case, the PDA is another laptop, but the procedure should be very similar.
  I would check the firewall settings later if it still does not work.

• 6525 - resettlement and internet connection problems Deskjet

  Hello

  yesterday I managed to install my new printer hp deskjet 6520 (5) on my HP Pro 3520 (AiO) with win 7 - using a wi - fi connection. Then, I also installed the printer on my laptop (sony vaio) - also use wifi. The two communicated yesterday with printer. But I have not tried to use brought down PC after install portable printer

  Nevertheless, today HP 3520 Pro could not have communicated with printer. Software repeatedly said the printer cannot be connected to the PC (while printing through the laptop was ok...). No miracle has helped so I decided to uninstall and reinstall the printer.

  I've uninstalled it successfully but when I try to use the hp guide software installation (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-122330-1&cc=cz&dlc=cs&lc=cs... he just said initially that I am not connected to the internet... Although I have no problem with the internet connection (I even tried connecting cable...).

  Help, please... I do not know how to do this

  Thanks in advance

  It is now resolved... I do not understand this, but when I turned off my laptop, the printer begins to communicate with PC...

  If HP - is there a reason why cell phone (with the installed printer) refuse the communication between the PC (HP Pro 3520) and hp printer deskjet 6525?

• PPPoE and Internet connection

  I just bought an Inspiron from Dell 530 s with Vista Home Premium. I also have Comcast as my ISP. The computer is connected via the Modem Router. I have a computer (XP) desktop and laptop (Vista) that is connected to the router and can receive the internet. However, when I try to connect and go to broadband (PPPoE), it requires a user name and password but the Comcast does not require that.

  I tried a lot of things - turned off Windows Firewall, disable iPV4, the 6 and combinations, but nothing helped. Right now I'm about to take the CD of Windows XP Pro and install it. At least I know it works.

  I would really like this to work with Vista Home Premium but the Internet connection is driving me crazy.

  Any help would be greatly appreciated.

  Thank you

  JohnD