WRT160 must be connected to a computer by cable? Need information please.

Similar Questions

• My Canon pixma MG6320 must be connected to my computer does a 'download' a new driver?

  My Canon pixma MG6320 must be connected to my computer does a 'download' a new driver?

  Hi set231,

  When you install a new driver, it is recommended that the PIXMA MG6320 is not connected to the computer.  Please sign in when prompted during installation.

• Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

  Question asked by Neil Clark (me)
   
  I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
   
  Sunday, August 22, 2010 01:54

   

  Windows Live K - Ann C response.

   

  Hi Neil,

  This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:

  
  Important: before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

  Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.

  
  BACKUP REGISTRY KEYS:

  1. click on Start, click on run

  2. type regedit and click Ok

  3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

  4. click on file and click on export

  5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

  6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

  7. navigate to the location and find the name of the file with the .reg extension and click Open.

  Note: you will be prompted that importation has been properly registered in the register.

  
  TROUBLESHOOTING STEPS:

  1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

  2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

  a. click on the [] sign + next to HKEY_CURRENT_USER

  b. scroll and click on the [] sign + next to Software

  c. scroll down and click on the [+] sign next to Microsoft

  d. scroll down and click on the [+] sign next to Windows

  e. scroll down and click on the [+] sign next to CurrentVersion

  f. scroll and click on the [] sign + next to the Explorer

  3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

  4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

  5. close the Windows Registry Editor and restart your computer.

  Thank you

  K Ann C.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

   
  Thursday, August 26, 2010 09:27

   

  Response from Neil Clark

   

  Hi K - Ann,

  Thank you for the above information.

  I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.
  
  So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

  Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  Can you tell me what I need to do to work around this problem of backup of the registry?

  I look forward to receiving your response.

  Thank you

  Neil Clark.

   
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Monday, August 30, 2010 22:19

   

  Response of Windows Live Mechell P.

  Posted by Neil Clark

   

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  For this error, you must contact the Support Windows via Microsoft answers Forum link below:
  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Thank you
  Mechell P.

  Hi NeilRClark,

  When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

  Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

  To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

  Check out this link to do the same thing:

  How to capture a file or a folder in Windows XP

  To take ownership of a file or folder

• BlackBerry smartphones "your computer must be connected to the internet to perform this operation" during the synchronization.

  My curve has this error message:

  "your computer must be connected to the internet to perform this operation. Make sure you are able to connect to the internet and try again."

  Worked well with desktop manager 4.6...

  Update 4.7 for explode...

  found an article to fix... regedit and change hklm-software-reasearch in motion-syncronize blackberry\

  change the status from 1 to 0

  has worked well...

  until the 5.0 update...

  now it does not work yet, and this key is no more.

  Of course, there are internet and there are no active firewall or any application that might block this traffic, no proxy settings, routing of questions etc...

  There must be the answer to this question... I know that I'm not the only person having this problem.

  Craig

  Hello

  You only need to connect onve, and then you meet the demand.

  I ran twice and I can't logically explain why it occurs.

  On first installation I finally have the PC connected directly to the cable modem, after disabling the firewall software.

  It took about 6 hours with Kapersky to ensure that he did not get infected. It was a friends DM 4.5

  The second was total frustration with version 4.7. On my network.

  I, like you, have the routers and firewalls in front of the cable router if I had a packet sniffer, it would have been easier to trace.

  I reasoned that the PC and applications like explore and Outlook can access internet with out fail.

  I then followed the gateway IP address for my PC.

  In Windows click on start, then run, then type 'cmd' and press ENTER to open a DOS window.
  -In this window type "ipconfig" and press ENTER.
  -L' display the IP Ethernet the subpattern options, etc..  'Default gateway' is what you need.

  -Copy the IP address of the default gateway.

  Then, I started the Blackberry device manager and open the properties Blackberry icon in the systray.

  I was trying to see if I could find what the Office Manager was trying to access, or at least which way he wanted to.

  I found the Blackberry router configuration tab. Click at the bottom right "activate the bindings defined by the user.

  So basically, you can provide a route to bypass "static route. I entered my gateway address default PC, hit apply and OK.

  I did a cold start system, began the DM and he never moans, simply press on the internet and I couldn't access to the

  synchronization options. It worked without changing the settings of firewall or a router. I deliberately left it in place that that

  Gateway IP worked for another program on my PC. (I have mu PC configuration to device on the home network.

  After constant running for a few weeks, I went and deleted the bypass address. 4.7 installation has yet to miss a

  Beat.

  Well, I broke probably 87 regulations of the FCC, all agreements of the RIM, but it worked for me. !

  If I'm not here tomorrow have a drin for me at the party!

  I just installed the 5.0 Desktop Manager and never had the problem.

  So, basically, it's your call!

  The worst that can happen is it doesn't work and close down more away, the best that happens is that you logged.

  I recommend you do a program of "sniffer". This is the one suggested by Blackberry in the KB article

  (Packet capture tool (for example, Wireshark®))

  Let us know what you think.
  Thank you

  Bifocals

  

• Example: officejet j4580: why my printer say my appears not connected to my computer

  Why my printer say my appears not connected to my computer

  Hello @momodeda!

  Thanks for posting on the HP Forums!

  I don't know why the computer does not show the printer offline, but I would be happy to provide help to try and get communicating them again!

  The first thing I would suggest is to power cycle all the devices.  Remove the power to the printer, shut down the computer and remove the power to the router.  Wait 20 seconds, then reconnect the router.  Wait for the lights on the router to return.

  Plug the printer in and turn on the computer.  Once all devices are back on, try printing again.

  If this does not work then I would recommend uninstalling the HP software.  Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
  
  To uninstall the HP software, click here: uninstall the HP software
  
  To perform a disk cleanup, click here: perform a disk cleanup
  
  To download the HP software, click here: HP Officejet full feature and driver software

  If please, after back and let me know how it goes!

• I lost connection on the computer like many light wireless wireless router.

  I've got three Kindle and a laptop computer, more my PC connected

  Original title: I lost my WiFi connection at home in light of the route for the wireless is not lit.

  Hi geraldthorpe,

  Thanks for posting your query in the Microsoft Community. It seems that you have no internet connection on the computer. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  We start with a few questions-

  (1) what is the version of Windows installed on the computer?

  (2) you are able to connect to Internet via LAN cable?

  (3) are other computers at home able to access Internet?

  (4) do you get any error code or error message?

  (5) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  As a general rule, if the wireless light is not on the router means that the ability of routers to transmit wireless is lost.

  The router has generally, 4 types of fires.

  Power - number 1

  Test - number 2

  Wireless - number 3

  Internet - number 4

  Numbered LAN are turned on only if a network cable is connected.

  If the computers are connected wirelessly, all the lights except the indicator light should light up.

  I wish you perform a reset and a cycle of power to the router.

  Reset the router-

  You must locate a set PIN size behind the router and press the reset button with a pointed object for 10 seconds. Now, release the button and wait for the lights to come back.

  Note If the wireless light is back on.

  Power cycle-

  I wish that you unplug the router from the power outlet main and plug it back again.

  Check if the problem persists.

  Method 2-

  I would have you look at the article-

  Network convenience stores

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 3-

  I would have you look at the article-

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  We know if you need help. We will be happy to help you.

  Thank you.

• cRIO only with switch ethernet connection and the computer

  Hello

  I use a cRIO-9073 connected via an ethernet switch and then to my computer and also connected to the corporate network. The cRIO connects fine (I can interact with the remote façade on the cRIO) using this method, but I can't view the remote façade when I connect just my computer for the cRIO via the ethernet switch. Where can I find the method of connection to cRIO by ethernet switch?

  Thank you

  Note: I configured manually my computer an arbitrary IP address and the subnet mask when you use only the ethernet, cRIO combo switch, no network. But I can't repeat the cRIO connection, there may be a step I'm missing.

  bermea,

  Hello! Let me be sure I understand your problem and then make a sugguestion.

  You have your PC and the cRIO connected to an ethernet switch that is also connected to your company network and you are able to see the cRIO to the MAX. However, when you have disconnected your network switch companies, leaving only the PC and the cRIO connected, you are more able to use the cRIO or see in MAX. Is this correct?

  It seems that you have indicated that you have setup your PC to have a static IP address for when it is disconnected from the network. If this is the case, you must also set the cRIO to have a static IP address. Here are some documents that can help you do this.

  • Choose a static IP address for your engine in real time
  • Why my controller cRIO not Show Up in MAX?

• When I try to log on my "HP Pravillion 553w" userinit.exe Application error comes up and asks me to click ok to terminalte request. What can I do to connect to my computer?

  "When I try to connect my computere"HP Pravllion 553w"userinit.exe Application error comes on and says" application failed to initialize, click on ok to terminate the program. I just want to open a session. I don't know what made it? can someone help me please.   Georgia

  Hi, Georgia,

  This could be a limitation of the fast user switching feature.

  The fast user switching feature may not work if there is insufficient computer resources to create a new Winlogon service thread. When there is insufficient resources, the system may stop responding (hang), the system may lock up computer or the user may receive a Userinit.exe error application and the following error message:

  The application failed to initialize properly (0xc000012d)

  Method 1: In these cases, some users must log on to the computer, or you must close some programs to free up the resources of the computer.

  For more information, see:

  A discussion on the availability of the fast user switching feature

  This problem may also occur due to registry settings incorrect shell.

  Method 2: Try the steps listed here.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  To resolve this issue, follow these steps:

  a. press CTRL + ALT + DELETE and then click Task Manager.

  b. on the file menu, click new task (run...).

  c. type regedit and then click OK.

  d. in the left pane, look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  e. in the right pane, double-click Shell.

  f. in the value data box, type Explorer.exe, and then click OK.

  g. in the right pane, double-click Userinit.

  h. in the data value box, type %windir%\system32\userinit.exe and then click OK.

  Note The %windir%\System32 placeholder represents the path of the Windows folder. By default, C:\WINDOWS is the path of the Windows folder.
  If you type an incorrect value in the value data box, you cannot connect to the Windows XP-based computer.

  i. exit the registry editor.

  j. restart the computer.

  Check if this can help you.

• Cannot delete files and music always there but not display upward when I connect to the computer?

  Hi all

  Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again.  That's where the real problem started.

  For some reason I can't delete three of the albums on my player.  Each of the albums have what appear to be corrupted in them files. My computer does not recognize the file type and file extension is given so I don't know what they are.  Each file "appears" to 4 GB in size but that may not be appropriate for my e260 is obviously only 4 GB in size!

  Whenever I try to delete them I get an error message reading "cannot delete file: cannot read the source file or disc»

  I tried to update the firmware, reset e260 to factory default settings and made 'restore' thingy (where you hold registration and plug it into the computer, etc.) and these files are still there.

  After reading this thing of disk checking on this forum, I did this.  I was then able to remove two of the albums, but when I tried to delete the third album renamed 'a' and the damaged file shows 0 bytes in size, but I still can not remove.  However, I can move it to the folder music to any other folder.  I just can not remove!  When I do, I get an error message saying "cannot delete f: cannot find the file specified. '.  Be sure to only specify the path and the correct name.

  After all that I started my e260, and now I find that 2 other albums are always on it, even if they do not display any where when I connect it to the computer.  I can see and read these albums on the drive, and they seem well, they do not appear to be there when I plug it into the computer and look for them in windows Explorer.  The music folder is not hidden also.  These two albums are not part 3 albums that I could not remove, they are actually part of the new substance started sort of all these problems with the music does not and is not only now that they are the display upwards and play but are not appear when connected to the computer!

  I know it's probably not a lot of information but can someone tell me how to fix this?  If not, can I just format the * bleep * thing or I'll then have an e260 dead?

  See you soon,.

  PKFFW

  PS: Sorry for the long windedness of this post.

  Format will not remove the firmware, which is the operating system of the Sansa. It removes only the content that you have added. It will go back to what it was when it was new out of the box.

  MTP does not matter if you have never used it. The ghost album can be just a list remains in your database file. Nevertheless, we must get rid of this corrupt file, so Format is probably your best option.

  For what it's worth, to connect with the PSG, your computer needs Windows Media Player 10 or 11 is installed. XP comes with WMP 9, so he will not see the Sansa in MTP mode. unless you have updated.

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• How to do past the connection if the computer indicates the user file is corrupt?

  I have windows vista home basic race and a user account with the computer configured password allows the password to enter but once past this computer file of the corrupted user States and dates back to the user login page

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Get 'no scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. "

  Original title: Windows Fax & Scan

  Hello, I just bought a new printer (Canon MG2450), and every time I try to scan something an error comes out.

  The error that says:

  No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. For more information about adding or troubleshooting scanners, see Help and Support.

  the printer is powered on and connected. I tried searching the Internet and I tried the TWAIN_32 and everything is good.

  What can I do?

  Daniel Capelle

  The scanner came with a CD to install the software?  Some more recent does not come with a CD, you must go to the Canon Website and you get the software.

• Remote Desktop on Windows 7 Professional 64-bit does not connect to my computer Windows XP VPN

  I recently updated from windows XP 32-bit to Windows 7 64 bit.  According to the same installation instructions, that I used on XP to connect to my computer to work through VPN & remote desktop is no longer working.  I can connect to the VPN connection without no problem, but when I use remote desktop to connect to the computer, it does not work.  I get the message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are all very well, so it must be another problem.  I also checked windows firewall remote desktop is allowed on the exceptions list.

  Any help would be greatly appreciated!

  I fixed, which was ultimately quite simple.  I changed the 3 settings, 1 - uncheck the TCP/IP v6 2 - in the options of the remote desktop, ADVANCED tab, I changed the server authentication for: connect and don't warn me.  3 - below, to connect from anywhere, settings...  I chose: do not use a remote desktop gateway server. \
  I checked the TCP/IP v6 and everything still works.
  Hope that helps someone.

• Get the error message: "driver software was installed correctly" and failed to get the Samsung Galaxy S to connect to my computer.

  Original title: Samsung Galaxy S

  Cannot connect Samsung galaxy s to computer says software driver has not been installed successfully

  Original title: UBS connection I can't get my samsung galaxy s to connect to my computer, it keeps giving me an error message that says the driver software was not successfully installed

  Previous page Next Page

  Hi Jeehadave,

  1 have you tried the steps by Sandeep GNT replied on March 13, 2013?

  2. you receive the specific error codes with the message?

  Usually after installing the Samsung Kies software, you will be able to connect the Samsung Galaxy with Windows.

  Samsung provides the Kies software to communicate with Windows.

  You can try to connect to another USB port and check if it helps.

  If the problem persists even after installing the Samsung's Kies software, then you must get in touch with support from Samsung to get help.

  Hope the helps of information.

• I can connect to the computer without entering the password.

  Original title: set a password for pc win 7

  Help, please! I put a password for my PC but I can connect by pressing right on the key entry without any password typed above.

  Thanks in advance!

  Probably, you set an empty password. Here's how you can define a non-empty password and see at the same time as she is:

  1 log on to your account.

  2. click on the start planet.

  3. type the three letters cmd in the search box.

  4. press on Ctrl + Shift + Enter

  5. click on "run as Administrator".

  6. type the following commands and press ENTER after each:

  NET user "user %%nom" 123456
  This command sets the password to 123456. You must test by rebooting the computer.
  P.S. Have you thought to create, test, and document an alternative admin account. If this is not the case, what would you do if something was not with your one and only the admin account? Happens all the time...