WRT160N connects portable wireless on Windows 7, but not Windows XP

Windows XP worked well on WRT54G, but got laptop additional which has Windows 7, which of course was not compatible with WRT54G according to troubleshooting on Windows 7. So, bought a WRT160N, which I believe is Version 3.

1 run the Setup for the WRT160N on the XP computer and went well. But trying to connect wirelessly, the login screen sits there trying to connect to the router with an indication referring to "verify the identity. The number of packets received only amounts to about 3. The LAN cable works like a champ, if this isn't the purpose of a wireless router.

2. I asked the password WEP to Windows 7 computer laptop and it works fine.

3. what should I do to clean the connection to the Windows XP computer?

Thank you!

Click the Start button > Control Panel > here Network Connections - right click on "Wireless network connection" icon, then select properties - click on the "authentication" tab - uncheck "activate the network access control using IEEE 802. 1 x"and click Ok. Now, again go to the network connection and try to connect to the wireless network.

Tags: Linksys Routers

Similar Questions

  • Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

    PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

    Hello

    To help you better, please answer these questions.

    1. don't you say no Internet access in the notification bar?

    2. what diagnosis you have to run?

    3 did you do changes on the computer before the show?

    To solve your problem, try the provided items.

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    You can check the link:

    Troubleshooting Wizard

    Reference (my computer can not connect to Internet)

    http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

    If you need help with the Windows operating system, just tell me and we will be happy to help you.

  • I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

    Original title: connection problem

    I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

    The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

    Hello

    Thanks for posting your query on the Microsoft Community.

    With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

    I would be grateful if you could help me with more information:

    1. Since when you are facing this problem?

    2. What is the exact error you receive by accessing the computer?

    I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

    Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

    For more information, you can consult the Microsoft article.

    What to do if you forget your Windows password

    http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

  • connect to the wifi of comments, but not host wifi

    It's a mystery. I have a Dell Inspiron 15R N5110. This laptop is one of the many devices in my house. All connected to a DLink DIR-655 router. But, this machine will ONLY connect to the wifi guest account and not the wifi of the host. Very strange. All other devices connect correctly. Also, this Dell laptop connects fine to another outside my home wifi network. It runs Windows 7. I thought it might have something to do with the virtual Miniport adapters, but really am puzzled now. Any suggestions?

    mptsep,

    Start, Control Panel, network and sharing Center, manage wireless networks. Remove all the networks that you are having problems with, then try to log in and see if you can.

    Can you run REMOVE YOUR PRODUCT ID and the OWNER UNREGISTERED research information system and publish the information here.

    What program anti-virus and firewall are you using?

    Rick

  • Connected to the point of access, but not the internet.

    I install an access point using a router. With windows 8.1 I am able to connect to this access point and internet access.

    But not other computers with windows 7. There are connection but wireless adapter show without internet access.

    Try almost everything that I know. Am I missing something?

    I hope someone can give some advice? Thank you very much

    1. you can try Microsoft Fixit from the following link:

    http://support.Microsoft.com/kb/299357/en-us

    2. press the key Windows + R-> type services.msc-> press ENTER. Click Yes if prompts UAC. Then, look for the WLAN auto configuration service. Double-click it and check whether the service is started and running. In addition, make sure that the startup type is set to automatic.

    3. If the steps above could not solve the problem, kindly open command prompt, run the following command and post the result here:

    ipconfig/all

  • Bluetooth connectivity - although get all paired devices, but not able to send and receive any file.

    I always found the problem when connecting Bluetooth devices. Although that devices paired but not able to send and receive any file.

    Please guide.

    Hello

    Don't forget to check with your system/motherboard manufacturer Support as long as that
    the real peripheral manufacturer. Updated the BIOS and drivers from the chipset (both can affect the)
    BT) and BT drivers to their online resources.

    Read these:

    Why isn't Windows find my Bluetooth or other wireless devices
    http://Windows.Microsoft.com/en-AU/Windows-8/why-isn ' t-windows-conclusion-device
    Device advice
    http://www.Bluetooth.com/pages/device-advice.aspx

    Microsoft - hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    What happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    BluetoothView is a small utility that runs in the background and monitor the activity of
    Bluetooth devices around you. For each detected Bluetooth device, it displays the following
    information: device name, address, Major Device Type Bluetooth Type device minor, first
    Detection time, last detection time and more. BluetoothView can also inform you when a
    new Bluetooth device is detected, by displaying a balloon in your bar tasks or playing a
    a quiet sound signal. -FREE
    http://www.NirSoft.NET/utils/bluetooth_viewer.html

    BluetoothCL is a small console application that transforms all current detected bluetooth devices
    to the standard output. For each Bluetooth device, the following information is displayed:
    Address MAC, Minor Device Type, Device Type Major and possibly society
    name of the device (if the external file of MAC addresses - oui.txt is provided) - FREE
    http://www.NirSoft.NET/utils/bluetoothcl.html

    BluetoothLogView is a small utility that monitors the activity of Bluetooth devices
    you and displays a log of the devices in the main window. Whenever a new
    Peripheral Bluetooth comes in your area and when the appliance leaves your area, a new line of log
    is added the following information: device name, device address, time of the event, event
    Type ("Device arrival" or "Equipment Left"), Type of aircraft and the company that created the device.
    BluetoothLogView also allows you to specify a description for each device (according to her)
    MAC address) that appears in the column "Description". -FREE
    http://www.NirSoft.NET/utils/bluetooth_log_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Wireless printer will print but not scan

    I have a HP C309g printer.  It has worked fine for a few months.  Now it WILL print, but not an analysis.  If I try to scan from the printer he says 'try the scan of the computer', when I try to start the scan of my computer it says "scanner inaccessible."

    Details of my system and what I've tried:

    Printer wireless

    Windows 7 64 bit

    Network does not work properly

    Have restarted, computer and printer

    Have reinstalled the printer

    Installing updates

    Lance HP Print & Scan doctor - says it can't find printer, even though it may find our other two printers

    Thanks for the advice, even though none of them solved the problem so I tried to uninstall the printer again and this time I used the HP on the web site, re - install wizard install the printer.  The scanner works now!

    Thanks again for the response.

  • Wireless Internet w/QuickStart, but not with the regular boot of Win7

    I have a Pavilion dv4-4141us.  With QuickStart/QuickWeb, the laptop has no trouble to connect to my wireless network and Internet usage.  But, when I do a normal in Win7 start, although the lapop connects to wireless normally, it does not provide a connection to the Internet.  If I connect to the router via Ethernet, then cable and wireless connections are good.

    I compared the security type, MAC address, IP address, etc. and can't find no difference between the regular starting values and a quick start.  Troubleshooting Win7 app isn't any help. He recommends that I reboot the router - I did many times without any effect on the problem at all.

    I use the same network wireless with an iPad without any problem, and I have no problem using the Ethernet connection to share files and printers between the laptop, an other PC Win7 and Ubuntu Linux a PC.

    Bottom line: my HP laptop does everything well except wireless Internet (except in quick start mode).

    Hello:

    There the Broadcom 4313 WLAN card you find the parts list for your model.

    See if updating the driver for this card help.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  • HP Photosmart 6510 series connects to the network and Internet, but not the computer.

    Hey all,.

    I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

    I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

    No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

    Hi old_geekster,

    You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

    HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

    I would like to know what are the errors you receive?

    http://www.HP.com/go/tools

  • I can't get on my hotmail account - internet connects to all other Web sites, but not Hotmail. Any ideas?

    I got in trouble for the week when you log in to my hotmail account. Internet connects to all other sites Web but Hotmail. You have any suggestions to solve this problem. It's really annoying. Thanks adrienne

    After all the Hotmail issues in the appropriate forum found here:
    http://windowslivehelp.com/

  • WRT54G - Internet connectivity failure - everything seems to work, but not online

    I have a WRT54G V8 router, who is 18 months old. Its used by 3 laptops to connect to the Internet (Wi - Fi all). All 3 laptops unable to connect all of a sudden. Steps are taken to solve the problems, still no luck. Please suggest if something else can be done.

    1. first test was to remove the router and connect a computer directly to the modem via a LAN comcast cable. Internet is available

    2. I have hard reset the router and configured again. No luck

    3. check the connectivity to the Internet through ports 1 to 4, no luck

    4. I can see the available signal and connect to the network, but not internet connection. I see the cell as shown (all dynamic) IP address obtaining

    5. I upgraded the firmaware to 8.0.6 version and and not set up once again, no luck (same as step 3 & 4)

    6. removed the WEP security, does not

    7 soft reset on the router (via the admin page reset to factory settings), no luck

    LED status

    Power - on and yellow

    Cisco - on

    WAN - SUITE

    Internet - ON and flashing

    Lights of port - when a laptop is CONNECTED

    I see the excellent signal strength and all laptops can connect to the network, but cannot go online. Google chrome shows a message hosting "solve" until timeout. Laptops show a 192.168.1.XX IP address. 4 ports are also not connect to Internet (mobile one GETS IP address via the ports as well)

    I have no other options left. I've seen a similar thread here (http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=2288), but no response. Please suggest what to do next.

    Okey, I finally found the problem. His Modem.

    Router is not able to get the IP address of the modem if the modem is started first and then I plug the internet cable to the router. But if I keep the router and modem connected and then reset the modem while keeping the router powered on, the router receives an IP address.

    And in both cases, if I connect the laptop with the modem directly, computer laptop can connect to the Internet.

    I bought a new router (WRT54G2) thinks that the problem is with the router, and I can reproduce the same behavior with both routers constantly.

    Make sure you modem is Motorola surf.

  • Re: Satellite L300 connects to 802. 11 g, but not the 802. 11B wireless

    I'm trying to connect my new wifes computer laptop Satellite L300 my 802. 11 b wifi (WEP-active).
    It fortunately detects and connects to my network 802.11 g of neighbors, but could not find my 802. 11B.
    Other portable fortunately find and connect to my router.

    OS - Windows Vista

    Any help would be appreciated.

    Hello

    Did you choose the standard 802.11 b in the WLan card properties?
    Check this box...

    You can reach these settings go to Device Manager-> properties-> Advanced tab WLan card!

    Here, you have to choose (enable) then 802.11 b
    Please check also if the router and the wireless network adapter using the same channel!

  • HP Officejet 6100 Wireless: print hp 6100 but not Gmail or IE Windows

    My Officejet 6100 is on wireless network, and the blue light says that it is connected to the radio.  I can print documents from Microsoft and others generated by electronic mail, but cannot print e-mail (Gmail) or all screens.  Until yesterday, all the print functions worked.  What about other documents, it's that the print selection screen.  I click on 'print' and nothing happens.  Nothing is put on hold.  My HP Pavilion running on Windows 7.  Recently I recharged having officejet software to completely reload Windows 7, so there the drivers up to date.  My link with the wireless is via ethernet and wife grace wireless.  It can also print screens or e-mails.  I printed just a test page successfully from 'printer properties '.  I cn use the USB connection, but it does not help my wife. Thoughts?

    Finally solved the problem by removing the printer and reinstall using an alternate option given by HP.  It was not the first of the two given, but he managed to connect my Internet to printing.

  • WRT54G v4 works PC connected to the router... but not of wireless signal

    The subject says it all.  A few things before this.  One is that we did pass the router in another room.  But things has worked well for a few days after that.  Before just what is happening, I used my phone inter-tel (plugged into the router).  PC and phone continue to have access to the internet... as I say, wireless in the House.  Fact stop and start all.  All unplugged / plugged in.

    Updated the firmware and it did nothing.  Some would like to help.

    After an update of the firmware, you must reset the default router, and then configure the router again from scratch.  If you have not done this since your last update of the firmware, please do it now and see if it solves your problem.  If you have saved a router configuration file, DO NOT use it.

    To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

    If your Internet Service is cable follow this link

    If your Internet Service is DSL follow this link

    Settings wireless-

    Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
    For wireless settings, follow these steps: -.

    Click on the Wireless tab

    -Here the wireless network mode must be mixed...
    -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

    -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
    Please take note of the name of the wireless network (SSID) because it's the network identifier...
    For wireless security: -.
    Click the sub-tab under wireless > Wireless Security...
    Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
    Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
    Please note the 1 WEP key as it comes to the security key for the wireless network...

    Click the settings advanced wireless
    Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
    Now let's see if you can locate your wireless network and try to connect...

    XP:
    Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
    Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
    Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
    Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
    It will connect...

    Vista:
    Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
    Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
    It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

  • can connect to my laptop to router but not the internet

    I got my son a laptop is a fujitsu, XP home, 1.73 dual core. When I try to connect to the wireless network, it finds my router Belkin Surf N, but it connects with local access only, or limited access when I connect via an ethernet cable to the Web without problem.

    Help, please.

    Hi kevinattard,

    Did you do any hardware changes or software on your computer before this problem?

    You can follow this link completely and check if the problem persists:

    Windows wireless and wired network connection problems

    Hope the helps of information.

Maybe you are looking for

  • If I pre-order the Apple Watch in the 16th I will get for sure

    I would like to pre-order the Apple Watch but im afraid that since I work until later that they will run out before I get to the store, if I pre-order I will get it the 16th or is - it possible that will run out?

  • replace the dvd drive omni 200

    I found the info for a 200 MS, but need instructions to replace the dvd drive in my HP Omni 200 5480.  or where to find it. Please, I beg you!

  • I want to uninstall a toolbar that has been the result of the search for something specific

    Hello I want to uninstall a toolbar that has been the result of the search for printable piano music.I uninstalled the stuff accompanying this research but I can't get rid of the toolbar. Can I just download an another toolbar as C.NET or what? I hav

  • Application of recovery media

    The aircraft crashed & I went with a clean install.  After I restore my computer to original set up microsoft asks for a product key I can't find on my device, it never came with an installation disk how do I will this problem?

  • Global correlation test site

    Hi people, I try IPS 7.0.1 and global correlation on one of my small remote offices, but I want to confirm to happen in fact malicious traffic before rolling out to 15 + other sensors. I have configured the sensor and used 'see global Stats' and 'mot