WRT54G v4 works PC connected to the router... but not of wireless signal

Similar Questions

• Laptop HP G70 connection to the router but not the internet

  I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

  It will connect to the internet ethernet of nis.

  My laptop connects fine with other networks if it is not wireless.

  All other devices are connected to the router.

  Please help this is extremely frustrating.

  You are the very welcome.

  I compressed the file and downloaded on my Skydrive account, which I shared the link below.

  Download, unzip and run the file called sp54972.

  https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

• connected to the router but not on internet

  Hi guys... First sorry for my English. Since Sunday that I'm not being able to go on the internet, and I don't know what happened, dor I have nothing.

  I get the correct configuration IP form the router, I've seen with other portable router to register my PC connected, but nothing impossible to navigate. I tried also with static IP address.

  I try a lot of time, disistalled and reinstalled NIC Driver restard PC, router, reset the TCP/IP stack. I am not able to also connect to the router configuration page. If I try to go to 192.168.1.1 a reception "site online, but is not responding...". »

  If I Ping 192.168.1.1 I have recevive request timeout, if I try it with another PC works and go quickly online reaaly. But i have installed in my PC with Virtual BOX, a virtual machine with windows XP and I go online, I can connect to 192.168.1.1.

  I've also tried sfc/scannow, but nothing...

  What happened?... and what I can do?...

  GIO tanks

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• HP 4500 g510n-z-printer connected to the router but not responding do not

  Hello

  I got this printer (HP4500 G510n-z) for 3 years. This worked without any problem until I changed my router and installed a nas on the LAN Server.

  Now the printer is connected via WIFI to router and is perfectly installed on computers connected to the router. But it does not work. I used HP Print-Scan doctor and he finds the device, but it was not connected. I tried to connect to the printer IP of all computers, but I have not received any response (using ping, it doesn't have 75% of the package). On the router configuration page, the printer is connected to the usual IP and on connected computers the TCP - IP is configured correctly.

  I have tried everything and I managed only to reboot the router. But it did not last, each computer remains connected only until you restart the PC nex.

  Sorry if I'm not too clear, please don't exitate ask for more details. Thanks for your help!

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Wusb300n connects to the router, but not to the Internet

  Recently I have formatted my hard drive and reinstalled Windows XP Home Edition. Initially, wireless has functioned well. Now he works briefly then stops. The router works fine (another I have it right now). The strange thing is that the utility monitor wireless network which is installed with the drivers for the USB wireless network card says that I'm connected to the network, shows the correct information, and shows even the networks belonging to the neighbors. Everything looks OK. But there is no connection to the Internet and I can't share files with my other computer. What is going on?!

  Another detail: it works for a while at first, allowing me to connect to the other computer on the network and browse the Web, but then it stops without any indication that something is wrong.

  Help!

  Here is how I solved this problem. I found using the Troubleshoot utility of connection IE 8.0 security protocol used by my wireless router was different from the one I had chosen when I set up the connection (WPA or WEP or somesuch) wireless network. By matching them up, I avoided having then off the connection behavior.

  In addition, it cannot help I installed the wireless card until I installed the drivers of general network for the computer. By removing the two and their resettlement in the proper order (second wireless card) I think I contributed something to address the issue.

• Connects to the router, but cannot send or receive data

  I have a WRT54G.  I can find the network and connect to the router, but I can't send or receive data.  I tried to connect directly to the router and I still not able to send or receive data. Both computers on the router has the same problem.  I did a reset the router back to the settings by default and still no luck.  Any thoughts?  Thanks in advance for the help.

  The first thing you can try is when you the Modem and the router is connected to the other, disconnect the power from the router and Modem, wait 30 seconds and then plug in the power to the Modem and once all the lights are solid, then connect the power supply to the Linksys router, now check if you are able to go online. If still no then...

  Who is your ISP. So I think you need to re - configure all settings of your router again.

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

  Original title: connection problem

  Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

  I suggest you to consult the steps described in the article:

  Method 1:

  You can try the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can update the driver of windows 7 on the manufacturer's Web site.

  Method 2:

  
  You can remove and re-create the wireless network connection, follow these steps:

  a. Click Start, type ncpa.cpl , and then press on Enter.
  b. right click on your wireless network connection and then click Properties.
  c. click the wireless networks tab.
  d. under preferred networks, click your Wireless
  network and then click on remove. e. click on view Wireless networks.
  f. under management of the network, click refresh the network list.
  g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
  
  Method 3:
   
  
  If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters and click Uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  
  Method 4:
  
  You can temporarily disable the antivirus and firewall on the computer and see if it helps:
  Enable or disable Windows Firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

• Win7 64 bit, connects to the router, but no error internet access-"page not found".

  Original title: Win7 64 bit, connects to the router but no internet access.

  Help! Windows 7, XP Home Edition Premium, 64 bit, connects to the router and I can access the network. However, I can't access the internet. PC was working fine until a few days when I was using IE Explorer and I suddenly got the error "page not found". This pc internet connection uses the onboard network controller. I rebooted the pc and used the option "safe mode with network. The pc worked fine and I had access to the internet. I restarted the pc and still no access. I tried a usb wireless adapter. No luck. I have not installed updates or software recently. My other 2 PC works fine. I tried to use the network troubleshooter and he could not find any problems.

  Hello

  1. Have you made changes on the computer before this problem?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  I would suggest trying the following steps and check the status of the question.

  a. open Internet explorer.

  b. click on tools, then on Internet options.

  c. click on the Connections tab.

  d. click on LAN settings.

  e. uncheck the option use a proxy server for your LAN .

  f. save the changes by clicking on apply and ok.

  Method 3:

  Configure Internet Explorer to disable simplified HTTP error messages and check the status of the issue.

  a. on the Tools menu, click Internet Options.
   
  b. on the Advanced tab, in the browsing section, disable friendly HTTP error messages display check box and then click OK.

  c. close Internet Explorer.

  d. restart Internet explorer and check the status of the issue.

• my laptop connects to the router but said validation of identity and remains in this mode

  using windows XP my laptop connects to the router but I preserve identity validating is... can help you?

  This probably means that your WiFi has become misconfigured.

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right-click on your wireless adapter icon and select "Properties".
  • Click the "Wireless Networks" tab.
  • In the list of "Preferred networks", select the entry that corresponds to your router, click 'properties '.
  • Click on the tab "authentication."  At this point, you should see a screen like this
  • Uncheck the box at the top that says: "authentication Enable IEEE 802. 1 x for this network. "
  • OK your way out.

• WRTG54S to connect to the network, but not internet

  I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell Vista), he was sitting in a box for about 6 months and now that I have a new (Sony running 7) I can connect to my network, but not internet. I have updated the firmware of 7.6 to 7.8 without change. I have tried no security, wep and wap without change. Also, I cloned the MAC, once again no change. Windows cannot detect all problems, and when I try to activate the router to connect to the internet it always says connection failed. I can connect directly connected to the modem but not when connected to the router or wireless. Any ideas? Thank you

  Problem solved. I had to go to a Motorola SurfBoard 4100 to a 5100. Thanks anyway

• Computer connects to the network, but not to the Internet, connect to the only local

  Hello world

  OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

  I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
  Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

  I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

  Is there a solution to this problem... or I'll just have to try everything that is out there?

  Thanks for your help!

  Hi MomPlaysBass,

  Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

  I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• Samsung S6 connects to the router but no internet

  When I switched to xfinity I bought a C6300. I had problems with the first not allowing my NAS to connect so I exchanged against another. My phone would connect to the router and work fine for awhile then lose Internet connectivity. The only way to get it back is to reboot the router. I tried several different units, and I am now on a C3700. The problem still exists and seems to be deteriorating. All of the suggestions.

  I solved my problem by replacing the Netgear with a Zoom. It was the only one that I could find who said it would work with Android. I hope that Netgear will get things straightened.

• WUMC710 connected to the router, but can not see internet

  My media WUMC710 connector on my router Netgear Nighthawk AC1900 double band on the first try.  Can see the MAC address in the connected devices list when you are connected to the router.  However, the devices connected to the WUMC710 cannot connect to the internet.  Tried TV, Blue-Ray and laptop.  All other devices on the wireless network properly.

  What is the problem?

  Fixed a problem with the update of the firmware of the router.  WUMC710 works great!