WRT54G wireless does not

Similar Questions

• Router WRT54G wireless does not work with the new modem

  Hi, I use my router WRT54G (Firmware version v2.02.7) on 4 computers for more than four years now, without any problems at all. However, today I had to replace my old modem with a brand new modem Speedtouch from my supplier, and although I made sure each cable has been connected properly, it just doesn't.

  The connection between my PC and the router (http://192.168.1.1) is good, but the problem must be between the router and the new modem. When I click on 'Status', he said: ""connection status: disconnected".

  After clicking on the 'Connect' button, it tells me that it "can not connect to the PPTP serverbe"

  Help, please

  Hi Matt,

  Although the resolution of this problem was a little simpler, I still thank you for your answer.

  The neighbor boy came up with the following response:

  «It just check the Type of Internet connection, cause you got an old type of modem before.» It will probably be set to PPTP. If this is the case, simply change it to "Automatic DHCP Configuration", click on "Save Settings" and everything should be ok then"

  And he was right!

  I am so happy

  BR,

  Niqui

• router Wireless does not work after Windows Update

  I have a router WRT54G V.5. Windows Vista Home Premium did an automatic update. Now wired connection works, the Wireless does not work. Ask key, but when nothing happens. Action of diagnoses has been canceled. I disabled and enabled, does not. Any help will be appreciated!

  Take not of the Settings (SSID and WEP/WPA Key) wireless router...

  Know the wireless settings follow this link

  Once you know the wireless settings are attempting to connect to your wireless network...

  XP:
  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Vista:
  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• Pavilion dv7: Wireless does not work after upgrade to Windows 10

  After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.

  This feature worked perfectly in Windows 7

  No worries.

  Thanks for the actual name of the product from your laptop.

  Let me take a look.

  I will edit this thread to let you know what I found.

  The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.

  https://communities.Intel.com/thread/59710?start=0 & tstart = 0

  You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS.  http://h10032.www1.HP.com/CTG/manual/c02842278

  I saw them on eBay for @ $20.00 USD

  http://www.eBay.com/ITM/new-Intel-Centrino-advanced-N-6230-Wireless-WiFi-Bluetooth-combo-card-62230ANHMW-/170958962681

• Wireless does not work - Satellite A300 model PSAGCA

  Hello

  My built-in wireless does not work on my laptop. I called the customer service line, his fees to fix the problem but to no avail. Now, I have to use the wireless adapter to use internet which is not the way I wanted to. Can someone help me please how to do my job with built-in wireless?

  Thank you

  adoolan

  + The message was edited: model number added to the object.

  Hello

  Please tell us which laptop model you have and what operating system is preinstalled.

• Re: Wireless does not work on the Satellite L505-13N Windows7 Professional 64-bit

  Hello

  I just got a Satelite L505-13N and upgrade to Win 7 Professional. The Wireless does not work. It seems that the driver is not yet installed.
  FN + F8, that should give me the option to turn on/off Wireless does nothing and the wireless on the laptop light is lit (orange color).

  What should I do?

  Thank you

  George

  Wait a moment George.
  What do you mean with upgrade? Did you do your own installation of Win7?

• Satellite L40-17 t Wireless does not! Win 7 32 bit

  Hello, my name is Alex. I have a problem with Toshiba L40 - 17 t wireless driver.

  So 3 weeks ago I got windows 7, WiFi worked fine, had no problems with it.
  Recently I reinstalled windows 7, and now my wireless does not work. It is said that no connection is available, even if the distance between my laptop and the router is 10 cm.

  I tried windows 7 driver newest---> does not
  I tried windows vista a newer driver---> does not
  I tried the windows xp compatibility mode---> does not

  Lucky my local network works, and I can't access internet, but I also want to use the Wi - Fi function.

  My wireless card is Realtek RTL8187B.

  I tried the drivers from realtek site too, they are not no longer works.

  However, I remember before you reinstall windows 7, I looked at the version of the driver and its date was around 2008. I have not found all the drivers for Toshiba L40 - 17 t, difficult 2008. I hope someone can help me solve my problem.

  Thanks in advance,
  Alex

  > I tried drivers from realtek site too, they are not no longer works.
  Is this means that wireless network adapter is not installed and recognized properly in the Device Manager?
  In the Manager of devices-> network cards, you should see the wireless network card. If there is no yellow exclamation point and then the wireless network card is installed correctly and that the driver is working

  > I have windows 7 ultimate, wireless worked fine, had no problems with it.
  Recently I reinstalled windows 7, and now my wireless does not work. It is said that no connection is available, even if the distance between my laptop and the router is 10 cm.

  This suggests that there is s configuration problem.

  First of all; Are you sure that the WiFi was enabled? Using FN + F8, you can enable the wireless network adapter. If the FN buttons would not work, then you must install VAP (value added package) and Flash memory card Support utility. If you didn t find these tools in the pilot L40, please check the new generation of portable devices such as L500 or newer.

  On the other hand; are firewalls, antivirus software pre-installed that could affect the connectivity? Check it; I've been reading about similar problems, and finally a firewall (like zonealarm) was the problem!

  Following; Do not forget that you have configured the wireless correctly; use the good encryption and password; for testing purposes, you can disable the security settings on your router and may attempt to connect without the use of encryption.

• Satellite Pro L40 Wireless does not and wont stop correctly

  Hello
  just got a Satellite Pro L40-15 1 week ago and it's been downhill.

  The Wireless does not work (and yes the switch is activated and drivers installed). Sometimes windows recognizes no device when I boot.

  And when I stopped he said blocking down, but crashes just on this screen.

  Now, I'm an advanced user, so I've tried many things. Can anyone help?

  Thank you

  As a first step, I would recommend to use the Toshiba Recovery CD and renew the operating system.
  Then update the Vista of the State. I mean to install patches and fixes Vista all published.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=107665

  Here you can see that a missing patches can have a bad influence on the wireless network card and the entire operating system!

  Good luck

• Tecra A7 - Intel PROSet / Wireless does not respond to the stop

  Hello

  during shutdown of my Tecra A7 the Intel PROSet/Wireless does not react, but must be completed manually.
  The last such Intel driver published by Toshiba download would help solve this problem?

  Thanks in advance for your support!

  Best regards
  ClausP

  Hello Christmas

  You can try to remove Inter PROSet and use the Windows settings for WLAN configuration.

  I don't have this problem, but you can also try installing the latest version of the Toshiba support page.

• Satellite L500D-163 - Wireless does not

  Laptop: Toshiba Satellite L500D-163 (with card wireless 802.11 b/g/n)
  Router: Pirelli Discus (having support 802.11 b/g).

  Hello

  I bought a portable Toshiba, Satellite L500D-163, two days ago.

  Windows 7 and Ubuntu Linux 10.04, the Wireless does not work. It shows all the available wireless network neighborhood, including mine, but it connects to my network.

  I also have an Acer laptop that connects to my network wireless without problem.

  I placed the Toshiba laptop side by side with my Acer laptop and tried all the options:
  802 11b, 802.11 g - WEP, WPA, WPA2
  with simple passwords of the style: "00000000".

  and SSID wireless to the router changed something as simple as "abcde".
  Computer Acer laptop connected without problem in all cases, but Toshiba didn't connect.

  In Windows 7, the connection information appears as connected but 'Limited' and the software Toshiba says that the laptop is not getting an IP address.

  I manually entered the IP address (192.168.1.2), subnet mask (255.255.255.0) and the default gateway (192.168.1.1 router =) below the configuration in Windows 7 wireless card, but it did not work.

  The laptop must support Toshiba, or y at - it an incompatibility with my router?

  Thank you.

  Great! Thanks for that!

• Wireless does not work - new installation Win7

  I had to reinstall Win7 64 bit. Wireless does not illuminate. Giw610.exe driver of Lenovo is not accepted. Device Manager does not indicate that there is a wireless card. However, I can boot Ubuntu and it recognizes the wireless card and it works perfectly fine. Any suggestions?

  I finally found the right driver wireless_test_x64_4005996.exe

• G50 - 70 Wireless does not not at startup and virtual machine

  Hello

  IM here.im again faced a problem in wireless.i can not access my lenovo g50 - 70 bluetooth, wifi at startup (live cd) and in virtual machine.please help its really annoying...

  Hi Angad,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with wireless does not not on your laptop G50-70.

  If Device Manager check the wireless device is detected, also check in the BIOS if the WIFI is enabled.

  Check if there is no exclamatory mark in wireless devices.

  Also check if there is software installed access connection.

  I hope this helps. Post back if the problem persists!

  Best regards

  Ashwin.S

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I can only connect to the network via a wired connection. Wireless does not connect.

  Wireless does not work but internet will work when plugged into router direstly

  Wireless does not work but internet will work when plugged into router direstly I reset my router repeatedly and still will not work.

  Not exactly what OS you use so here are some links to help you get started. If you need assistance with any of these steps please let me know. Thank you.

  http://support.Microsoft.com/kb/870702

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  http://TechNet.Microsoft.com/en-us/network/bb530679