Speco DVR8TL250 does not connect using Windows 7.

Similar Questions

• Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  I have two identical, the Samsung Galaxy phones, it connects to the pc to transfer files either does not connect despite the many possible corrections, I've read online by train.

  The phone tries to connect but is a problem of the PSG, while it is plugged said to install the driver, then momentarily, it says ready to use and then goes back to install driver again, it done a few times and then says failed.

  I tried to reset the phone to factory settings, reinstall the driver etc etc but nothing I tried works.

  I've read other posts of similar questions and have created a mtltrace.etl file, but I don't know where or how to download for investigation.

  Any help appreciated

  Hello Rob,

  Thank you for the update on the issue.

  I suggest you to uninstall all the drivers, that is Samsung as well as Bluetooth.

  Then, restart the computer and plug all phones Samsung three each so install the drivers and software from Samsung kies from the link below:

  http://www.Samsung.com/UK/support/model/gt-S6810PWNBTU

  After installing everything that the Samsung and then restart the computer and then plug the adapter Bluetooth (driver installation) and check if the problem persists.

  Thank you.

• How can I correct a problem accessing my firewall settings because the Group Policy client does not connect to windows?

  I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you

  Hi Sheldon,

  Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.
  You might try to tell scientists on TechNet on your question to see if they have a better answer for you:
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• hp3050a does not connect with windows 7

  I hae a 3050 HP desjet has which does not connect to my laptop which has windows 7 on it. Any suggestions?   I ran to the resolution of problems, and it did not come with a fix.

  HP support

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5061092&LC=en&cc=UK&DLC=en&lang=en&cc=UK

  No doubt that you have installed the full features software using the cd HP

• vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

  I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

  Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

  Thanks in advance for your suggestions on how to correct the problem.

  Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.

• tnsping kcp5 is ok, but does not connect using netservicename

  Dear Sir.

  We tried the trial version 10.0.5

  On the computer of Client 32 bit (XP and Windows 7) this PL Sql Developer works very well if we connect to 32-bit Oracle or Oracle Server 64 - Bit Server.

  We tried this on Windows Server 2008 64-bit (Machine formatted fees)-> installed Oracle 11 g 64-bit Standard Edition Version-> it works very well for the database on the server, as well as through client machine using netservice.

  Now, we have installed PL SQL worm 10 on Server 2008 (64-bit)-> customer request 32-bit install-> we installed 32 bit Oracle 11 g-> (full) Client created by using the new net service 32 Bit Client-> Net (kcp5) configuration utility-> we are able to

  tnsping kcp5 to the server physically level but also at the level of the customer in the machine.

  But when we connect with system/manager@kcp5-> it does not work at the level of the client as well the machine Server

  This installation of oracle 11g 32 Bit 64 Bit 2008 Server client has created this problem which worked very well.

  We have no "need to install 32-bit Oracle client 11g Oracle in Windows 2008 (64-bit server), but since it was held by Pl SQL Developer-> this, installed us.

  Please advise as what to do now.

  Kindly find attached three jpg files as below: -.

  (a) Test_Server_Services.jpg-> various Services running at the level of the Windows Server 2008 (64-bit)

  (b) kcp5 tnsping Test_Client1.jpg (netservice Testing which is OK at the level of the server, as well as at the customer level)

  (c) Test_client2.jpg connection system/manager@kcp5 that gives

  The error ORA - 12514 TNS Listener does not currently of service requested in connect descriptor

  Concerning

  Suresh BB

  ORA-12514 ALWAYS only occurs due to a problem on the Server DB system.

  One of the causes of this problem are when the Oracle database is broken & needs to be started.

  A remote client send a request to the listener by asking to be connected to a specific service.

  If/when the listener knows nothing about this service, the receiver responds with ORA-12514

  view the results from the OS controls following two:

  lsnrctl status

  lsnrctl service

  Because each request to connect to the listener gets connected, listener.log file will contain a line with 12514 as status code.

  * This line contains valuable debugging information. So after this line & surrounding lines.*

  for additional debugging suggestions read the URL below:

  http://edstevensdba.WordPress.com/2011/03/19/ora-12514/

• Portege R500 - Vista does not SP1 using windows update

  I just got a new Portege R500.

  Do not specify the information of Windows Vista Service Pack 1, so I guess that's not?
  But the automatic windows update does not offer to install SP1.

  What I have to do it manually? How?

  The other question is: is it OK to do, or are there many problems with drivers after that.

  Please help out me.

  Hello

  First update of Windows is always desirable and SP1 is really necessary, because it fixes many bugs in Vista.

  One of the reasons why Windows Vista doesn't automatically update the SP1 version, is that SP1 can be installed.
  Check if SP1 has been installed. To do this follow these steps:

  1. Click Start, right-click computer and then click Properties.
  2. Windows Vista SP1 is installed, you will see a reference to Windows Vista SP1 is displayed at the bottom of the Windows edition section

  However, I found a useful document of Microsoft Knowledge that could help you to update SP1
  [Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates | http://support.microsoft.com/kb/948343]

  See you soon

• Routers Sagem Sky does not connect with Windows Vista. Help!

  Sky Broadband have given me a new SAGEM router as my NETGEAR router broke.  My netbooks running windows 7 connected instantly like having our phones.  My laptop using Windows Vista and will connect but not communicate with the internet.  After almost 3 hours on the phone with the sky and every procedure they have listed I was told by heaven that the problem is with VISTA is incompatible with the Sagem routers and they are unable to help her and I should find a solution through the windows.  I don't quite see how to contact Windows by phone or e-mail in the United Kingdom despite the long navigation of this site!  Can anyone help?  Please?

  Have any sky broadband users managed to use their Sagem router with a Windows Vista computer!

  Start on this page to communicate with Microsoft:

  http://support.Microsoft.com/contactus/?ws=support

  Verify that the country is located in the United Kingdom at the top.

  If Windows was preinstalled by the manufacturer, Microsoft normally refer to them for technical support

• Specific wireless network does not connect in Windows 7, but does in Windows 10?

  I have a Toshiba Satellite L750D laptop, it is about 3 years old now.

  I use Windows 7 for a while. Everything works fine to connect wireless at home and more than other wireless networks, but the hours was spent without success to get it to connect to the wireless work (Ministry of education, that's why this included fiddling around with the proxy settings and user authentication options). I got it to connect properly this wireless in the past, but to another school.

  I had given up on actually being able to use internet in my class to improve the education of students.

  I upgraded my computer to Windows 10, then suddenly, following the same steps that we had tried before, my laptop had no connection to detnsw disorders. Hooray, 21st century learning!

  Unfortunately, some of the hardware in my computer graphics or something couldn't handle Windows 10 (or I couldn't manage Windows 10 and what he did to my outdated laptop), so I had to use the restore function, which came back my computer to Windows 7 without having to format my computer and re - install Windows 7 from an external source.

  Now she continues to refuse to connect, even advise that to contact the network administrator.

  It's driving me crazy. What is different between the 2 operating systems that allows to connect without fuss one way and deny the other way?

  I have triple checked everything I could think of that could prevent the connection, including the drivers and my antivirus, nothing helps.

  Is this just a case of Resistentialism that cause me to seriously consider spending the money that I have not currently on a new laptop just so I can show the occasional Youtube educational video?

  Has anyone else had a similar problem, or is it just me?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  The problem may occur if the network drivers are not correctly updated or you need to change the network settings.

  Method 1: Please follow the steps described in the article Microsoft help to the given address:

  Using the troubleshooter from network in Windows 7

  How can I troubleshoot network card?

  Method 2:

  I suggest that you change options for both the systems on the network in the Advanced sharing settings (Open Network & Sharing Center > Advanced sharing settings to change):

  -Enable network discovery

  -Turn on the file and printer sharing

  -Turn on sharing so anyone with network access can read and write files in public folders

  -Turn off password protected sharing

  Now, try to map the drive, follow these steps:

  1. click on Start, click on computer and click map network drive in the options under the address bar.

  2. in the drive box, click the drive letter to use.

  3. in the folder box, type \\server\share, where you can type the IP address of the drive to be mapped. For example, if the IP address is 192.168.6.xxx, you type \\192.168.6.xxx.

  4. click on Finish.

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Sony DSC-P150 digital camera 7.2MP does not connect to Windows 7

  Sony DSC-P150 digital camera 7.2MP...

  I TRY TO CONNECT TO WINDOWS 7 32 BIT, BUT ISN'T

  RECOGNIZE... PLEASE HELP ME

  You use W7 starter?

  If Ive followed the links to the right - http://store.sony.com/webapp/wcs/stores/servlet/SYAccessorySearch?storeId=10151&langId=-1&modelNumber=DSC-P150&x=0&y=0 and click on the support link, then "drivers and software", then your model number (DSC-P150), "Windows 7", and finally as "windows drivers and compatibility," he said:

  WINDOWS 7
  Drivers:
  The drivers needed to connect your Sony camera to a computer and transfer the files are already included in the operating system.

  
  Not supported:
  

  The Windows 7 Starter edition is not supported.

  
  

  
  

  Where the query re W7 Starter.
  

  
  

• Printer does not connect to Windows

  I have a 20 "intel computer core duo iMac with Leopard 10.5.6 and side Windows, I use Windows XP Professional.  I have a HP Deskjet 6988 printer wireless connected via Airport Extreme.  I installed VMWare Fusion 2.0.1.  This works perfectly (internet access, programs, etc.) except it won't print from any Windows application.  It gives a message "not responding" when I try to print.  "Printers and faxes" control panel shows the right printer with a check box indicating that it is the default printer.  I did a search for this problem but can't find anything the same as this.  Can someone provide help please?

  about the only other thing I can think - in the VMware menu at the top of the screen, go to the Virtual Machine, then settings, then activated is checked and make sure that you have scored the Match the default printer on Mac.  Have you tried?  It's the only other place that I see any reference at all to what printer you use w / VMware Fusion unfortunately.  Sounds like your settings Windows is correct, so I hope that's it.

• WRT610N does not connect using PPPoE

  Hi, I have a WRT610N I plugged my modem Navini and it entered my user name and password as usual.  The router connects to the internet using PPPoE.  I went back to my previous router which is a WRT300N and that works fine without problem.  I've upgraded to the WRT610N due to the additional features it has and I am very disappointed that I can not connected.   I also upgraded to the new cabinet, but it solved the problem.  Can someone help me solve this problem.  Any advice on this matter would be appreciated.  Thank you...

  The Internet is light on the router? You can change the cable connecting the Modem to the router then it reboot? Go to the router configuration page and do it on PPPoE then choose keep alive time redial at 20 and save it. Return to the situation and see if you get this error. If you have already updated its firmware, its possible that this is a hardware problem. Replaced this if its still under warranty.

• Creative cloud installer does not work - using windows 8

  Installer of creative cloud keeps ending abruptly without error message. I use Windows 8. It's a new PC and I just installed about 8 other apps. It's just what's wrong. Please hep.

  Hello Yvette,.

  Please refer to the threads below where similar problem was addressed:

  Re: Install Creative Cloud Desktop Windows Explorer crashes and hangs

  Installation of Adobe Creative Cloud crashes at launch

  Kind regards

  Sheena

• the airport does not connect to windows 10.

  Dear community,

  Eversince I've upgraded to a new deskptop (imac sold and exchanged it for an alienware area51 r2) and since I installed windows 10 on my apple airport computer has stopped working...

  I have tryd many airport uttilitys programs for windows in the hope of getting the question of the password to decode... but to no avail!

  the disc a contqains backup 2 TB of my old system windows that contain some key issues should I get access too.

  Anyone know a solution to my problem or know of a way I can view the contents of the disk to my windows pc?

  I really really want it works again on my windows system...

  Please issue me a fix as soon as possible or help if possible.

  Perhaps a technician can look in the Bowl teamviewer?

  You can always load airport utility in windows 10. Please download and install it.

  Connect the TC directly to the computer by ethernet. (If this you must remove the TC of the network is fine.) Simply plug the short supply cable).

  The TC factory reset.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Setup of model HQ TC should not be done from windows... but you can still manage a basic configuration. Ignore the warning that you need a different utility.

  Or do the installation from a Mac or ipad or iphone. Download iOS version airport utility for iOS stuff.

  The IP address of the TC will be 10.0.1.1 because this is the default configuration. In the type of the address bar in windows Explorer...

  \\10.0.1.1

  It should work.

• ThinShell 2.5.3 does not connect to Windows 8.1 VDI

  I'll put up ThinShell 2.5.3 on some older Windows 7 PC. It's on an AD domain using fully patched vWorkspace 8.5 (8.5.308.2004 connector). Try to install ThinShell 2.5.3 results in an error indicating the connector has not been detected on the PC.

  I then uninstalled this version and installed the 8.5.308.1991 connector. Then tried to reinstall ThinShell 2.5.3. It has installed.

  I have installation ThinShell in Native Mode, set EnableKerberos true and EnableSSO to True. When users open a session on the PC ThinShell launches the VDI. It connects, but then stops on the log on screen for Windows 8.1. Users must again enter their credentials and connect to the VDI. If the user already has a VDI session but is simply disconnected, opening a session on the PC ThinShell records all the way to the desktop.

  I also uninstalled the connector and then installed the 8.5.308.2004 (without messing with ThinShell). The results are the same.

  Hello

  I think it is because you have enabled EnableKerberos and EnableSSO.  EnableSSO will allow the credentials cached and you don't need this option while EnableKerberos.  Looks like you want to use Kerberos, then please try to set EnableSSO to false.

  I would also recommend that you use the configurator... http://en.community.Dell.com/TechCenter/virtualization/vWorkspace/b/vWorkspace-blog/archive/2013/10/17/thinshell-Configurator-2-0

  See you soon

  Paul