Xbox 360 cannot connect to my pc more

Similar Questions

• Xbox 360 cannot connect to WRT54G2 router network.

  I just bought a new router WRT54G2 specifically use for xbox live. I put my fine computer, using an ethernet cable from the router to the computer. And I used the installation disk to create a network name and password. But when I use the wireless adapter to connect to my network, it does not. And even when I manually type the name and the WPA code, he says that it can't find the network. The settings I enabled SSID broadcast. So I don't know what to do from here. Any ideas?

  Who is your ISP?

  Try the following settings on the router...

  -Change the channel to 11-2 wireless, 462

  -The tab Advance Wireless... Change the interval of tag to 75, the Fragmentation threshold to 2304, the RTS threshold to 2304

  Now let's see if you can locate your wireless network and try to connect...

• How can I get audio with my Xbox 360 HDMi connected to my HP 22bw monitor?

  I got this montor and I have my Xbox 360 to connect him with HDMI.

  I have a Turtle beach headset and I have this card that I used on my Tv with HDMI.

  Whenever I have plug this adapter into the monitor said that HDMI is not plugged.

  Is it possible so I can have these plugged in.

  It's the adapter.

  I fixed it. I just had to turn off 'Auto switch Source '. Don't know why it is was playing with her.

  Thanks for your help.

• Cannot connect to one or more systems of vCenter server: 5.5 DEVICE VCENTER

  Hi all

  Please help me.

  I installed with the new v 5.5 Center device in my environment.

  I connected with external oracle db.

  enabled embedded SSO.

  connected with windows AD.

  in the screen configuration .the entire state of the service are running. Ok

  https://x.x.x.x:5480 /.

  After web client loggin

  https://x.x.x.x:9443 /.

  HAD an ERROR.

  "Cannot connect to one or more systems of vCenter server:

  https://x.x.x.x:443 / sdk

  

  Note:. I reboot my device vcenter and try... got same error.

  I created the new group for vcenter advertising and tried... got the same error.

  When connecting with the Vsphere client: error below.

  "Connection unknow error (this only happens because of a logon failure." (Unable to connect to remote server")

  

  Please help me on this.

  Browlin

  Hello P.,

  After re install and follow the previous step the problem is resolved.

  Thank you

  Browlin

• Xbox 360 slim connect to the interface on WRT160N wireless - g

  Hello:

  I bought a new Xbox 360 Slim a month ago. Before that, in anticipation of the console to my new wireless capabilities I advanced and changed my old WRT54G (1.1) for a wireless-N router WRT160N allowed.

  When I plugged the console for the first time it was a nightmare to configure wireless settings... It wouldn't connect, in every possible way... And when I finally made a connection that he deleted just after 1 hour (I think it had something to do with the renewal of WPA key, if you must ask) I've updated the firmware and all was good again. BUT! It only connects to wireless-G... I have the router located on 'Mix', so she accepts my notebooks 802.11 G and my 360 Wireless N, but just, it detects the router mode G and connects like that...

  I tried EVERYTHING, but nothing works.

  It connects fine, I even get open NAT on the console and play online with no apparent problems, but I need Wireless N, because the router and 360 are too separate, and the signal is becoming weak. Also I usually stream 1080 p content so I need more bandwidth.

  I tried setting that "only wireless n" router, but then the console just does not connect, says he "can't connect to the wireless hardware.

  I could not test any hardware wireless-N, so I don't really know if it's the fault of the router, the console or is that just, they are not compatible...

  Any tips?

  Can't... My only two options are 'automatic' or 'only 20 Mhz'... :/ I can only change the channel on 20 Mhz. But thanks for the tip.

  EDIT:

  OMG, I can't believe it... It is NOT a malfunction N wireless network... This has to do with security... I had my personal WPA authentication method... According to joint works like a charm and everything connects, but the Xbox connect just the wireless G. Under Wireless-N only, it just does not connect. But I tried to disable security, and he comes to connect n wireless!

  Now, I switched to WPA2 Personal... it connects perfectly on Wireless N even if I set the 'Mixed' router and broadband radio and the way to the car.

  My problem is solved, however, I got to know is always:

  Why he doesn't connect WPA enabled?

• Vista Media Center and my Xbox 360 extender connection

  Hi I have a problem connecting my xbox 360 and my windows vista media center. Everytime I try I get the message saying that it can't find the range extender and suggests that it is one of the following three things

  (1) the Extender is turned on and connected to the network

  It's on and it appears as an icon of the xbox 360 in my network on the vista machine and can connect to the internet, so I guess the network very well.

  (2) that the code is correct

  It's that I checked it about 30 or twice now.

  (3) UPnP does not work properly

  I guess that's the problem but cannot figure out how to solve. I have a BT Homehub router. I've implemented through active UPnp. I even tried to disable the firewall completely on it and on vista, it made no difference to the port forwarding doesn't seem to be the answer.

  Help please it is one of the main reasons I got an xbox 360 and vista

  Paul.

  Paul Bradbury,

  There are always a few things that do not exist to try, so we can solve your problem. Below you will find a link on your specific issue. There are about four troubleshooting methods that you can try. Please let us know if it worked for you, and if so what method has solved your problem.

  http://support.Microsoft.com/default.aspx/KB/932159

  Let us know if you additional questions or concerns.

  Carlos
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You can use two dongles Microsoft Xbox 360 to connect 8 remotes Xbox 360 to PC?

  I wanted to just connect 8 xbox 360 remotes for sports games and most of all the 8 beast gang called fighting game player.  Have a dongle that works very well, but you can connect 4 to a dongle. If I had to buy another dongle I would be able to connect four more? Thanks for your time guys.

  Yes, if you can plug two dongles at the same time. You would need more than a port, so it may or may not be, but if this is the case, it will work.

• The Xbox 360 controller connection

  Hi all

  I have my amazing Lenovo P70, that I really like. Everything worked without any problem, except my Xbox360 wired remote. I check with my keyboard USB, mouse USB USB OTG and USB flash key. All these devices work as expected.

  But when I connect my original Xbox 360 wired controller via the same dongle USB OTG, the four LEDs (player indicators) start to blink. Operating system does not recognize controller and I can't exploit office with the help of knobs and buttons.

  I also try to run "USB host diagnosis" (from gPlay) and here is the result:

  http://usbhost.Chainfire.EU/?search=1018316

  I have the version of android stock 4.4.4 kitkat

  Lenovo/P70-A/P70-A:4.4.4/KOT49H/P70-A_S134_150729_16G_ROW:user/release-keys

  I think the OS (android) are missing the necessary controller driver.

  Can you please help me solve this problem?

  Thank you

  John

  I solve this solution myself.
  Everything works beautifully.

  John

• Issue of controller Xbox 360 (PC connection)

  Greetings all I am new to any connection my Xbox 360 controller to my pc and ive met some problems, Ive downloaded the necessary drivers and programs for my controller 360 to connect to my pc but when I connect my conroller Xbox 360 Usb charger supplied with the controller wireless controller wireless, it does not pick up there. When I hit the guide button it goes right on my xbox 360

  Great thanks for the help everyone. Looks cause im going to have to go buy a wired remote, I have a problem with my wireless controller where it does not load (when I conect the charger in the light control will be red for about 30 seconds then green shift, saying that it is charged when it is not.)

• WRT120N to Xbox 360 Wireless connection

  Hello

  My wrt120n worked perfectly with my xbox 360 until two weeks ago. I can connect to xbox live without problem but unplug it always within 10 to 15 minutes, my PC doesn't have this problem.

  My SSID and WPA2 Personal are correctly configured. I have forwarded ports 53-3074 Beach, yet I always disconnect. My NAT is not upward too strict or moderate. When I look at my network on the 360, it abandons the connection entirely for about 3 seconds and it finds automatically. My IP are staticly Setup. My firmware has been upgraded.

  Any advice would be appreciated.

  My 360 has been positioned behind my PC from my router and was causing the outcome that seems. Anyway, problem solved, no shit was due.

• How can I get my xbox 360 to connect to my pc

  I want to get the enternet play my games with my friends

  Hi Howard,.

  If you want to connect your Xbox 360 console to Xbox LIVE and you do not have a router, you can connect your console to your Windows computer and use his internet connection

  Click on the link below and see that it helps.

  http://support.Xbox.com/en-in/Xbox-Live/connecting/win-computer

  Good day!

  Please get back to us if you have any questions.

• Cannot connect to the app more

  Hi guys
  
  I can not connect to my appilcation more (single node install) 11.5.10.2
  
  I get the loginscreen (apache work. DB workin as before with the same credentials). But as soon as I get the password and click on enter I get the following error:
  
  oracle.apps.fnd.framework.OAException: Application: DNF, name of the Message: INVALID REQUEST of FND. Chips: APPL is fnd;. (Could not find message because there is no connection to the base)
  
  and then later in the stack:
  # # 0 in detail
  oracle.apps.fnd.framework.OAException: Application: DNF, name of the Message: INVALID REQUEST of FND. Chips: APPL is fnd;. (Could not find message because there is no connection to the base)
  at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:5526)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:958)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
  to _html._OA._jspService(_OA.java:88) oa
  
  
  Is someone can you please tell me where I can begin to solve this? I can't see all notes for this metalink.
  
  Thanks and greetings
  ceauke

  Hello

  APPLICATION OF INVALID FND. Chips: APPL is fnd;. (Could not find message because there is no connection to the base)

  This is a generic error and cannot stop here (as long as the database and the database listener are running).

  Do you think I should update the profile options with a SQL update to the base table? (It's only a game env so I did not "mind.) I wonder if the system that gets the same present when connecting.

  I recommend to update the options for profile directly, instead use an API.

  Please see the thread below for more details.

  Update profile at the user level options?
  Update profile at the user level options?

  Kind regards
  Hussein

• Xbox 360 internet connection problems

  I can't connect to internet because there is no gateway and my ip address does not work
  What should I do? #

  Hi Stephen94,

  Welcome to the Microsoft Answers community.
  a. Since when are you facing this problem?
  b. were you able to access the internet on your computer as soon as possible?
   
  I suggest you to reset the TCP/IP stack and check if that helps.

  Method 1: To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .
   
  If the same problem still persists, then try the next method.
   
  Method 2: Router/modem power cycle.
   
  (1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
  (2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
  (3) shuts down the computer (not restart).
  (4) wait at least 4 minutes.
  (5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
  (6) connect the Ethernet cable to the computer.
  (7) turn on the computer.
   
  For more information, visit the link below:

  http://support.Microsoft.com/kb/908885
  http://www.Microsoft.com/windowsxp/using/Networking/Setup/Xbox.mspx
  http://www.Xbox.com/zh-SG/support/xbox360live/connect_to_xbox_live/connection_methods/gateway.htm
  http://support.Xbox.com/support/en/us/Xbox360/xboxlive/getconnected/setupahomenetwork/windowsicsconnection.aspx
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Somes devices cannot connect to WiFi TimeCapsule more

  Hi everyone, I am facing a weird situation.

  Current configuration: the home Wifi is provided by a TimeCapsule, which has its firmware updated. A couple of device (10) are regularly connected (printers, iMac, MacBook Air, iPhone, iPad, iPod, etc.). Nothing very complicated.

  The situation:

  This morning, I had 2 friends at home with their personal devices (one tablet of Nexus and an iPad 1st generation). I tried to connect to my Wifi and it never worked. On the iPad, the wheel turned in the parameter space WiFi and no internet connection was possible. No Wifi setting has been provided by the TimeCapsule (no IP, etc.). On the tablet of the Nexus, I got more details: he was blocked at the stage of IP address get.

  Obviously, my first thought was to restart my TimeCapsule. Unfortunately, nothing has changed: these new devices have been blocked at the same stage and... my daughter iPod also got stuck. Exactly like the iPod from my friend. But has been connecting iPod to my daughter to my wife for the last 3 years!

  My friends finally left, so the problem is "over", with the exception of the iPod of my daughter. Until this morning, he was perfectly able to connect as usual, but now no.: the wheel keeps turing in the Wifi configuration. I have obviously reset network settings: nothing has changed.

  On the TimeCapsule, I see that the iPod gets an IP address. Also, when I change the name of the iPod in the control area, I can launch a sync to iTunes on the iMac and the iPod name is updated! So, this means that the iPod IS connected via Wifi, but it is not possible to browse the Internet or connect to what. The WiFi icon does not even appear in the top bar.

  All other devices (iPad, iMac, etc) works perfectly.

  Any ideas?

  M.

  ... except for the iPod from my daughter. Until this morning, he was perfectly able to connect as usual, but now no.: the wheel keeps turing in the Wifi configuration. I have obviously reset network settings: nothing has changed.

  As you probably already know, reset the network settings deletes saved passwords and network configuration details. It also exports the residual caches and preferences. Most of the time, it should be fixed.

  As it didn't, the only other suggestions I could give are:

  • Go to the option "forget network Wi - Fi" in iOS settings and then manually try to join the wireless network yet.
  • If this does not resolve the problem, then possibly one or more of your Wi - Fi connection settings for your wireless network may have to be changed:
    • Make sure that the network name does not include spaces or special characters.
    • Don't 'hide' your Wi - Fi network.
    • Try temporarily disabling Wi - Fi security to see if the iPad will connect now.

• Xbox/PC cannot connect to the 5 GHz network (E4200 v2)

  My network is detectable, but my machines will not connect (they were already connected).  They can connect to the 2.4 gHz network, but not the 5 (I use 5 for the streaming of media and gameplay).  Windows 7 says it's unable to connect.

  Please help a n00b networking.

  According to the scenario, try the following combination of steps:

  [A] with the help of the Cisco Connect software (if at all, you have installed the router using this software)

  1] open the software and go to the option that says "settings of the router.

  [2] then click on the option that says 'Advanced settings', which will take you to the router configuration page.

  [3] then go to the wireless network mode tab keep as mixed,

  For the 5 GHz channel parameters, you can do channel width to 20 MHz only and channel 40 or 161...

  [B] If you have not installed Cisco connect then you can connect to the router's user interface using its default IP address in the browser which is 192.168.1.1 and enter "admin" as password empty username field. This will take to the web interface of the router and then follow the steps as indicated above to make the changes.

  Second, update the drivers for the card wireless laptop and Xbox, then check the connectivity status.