XC74F-MGPQV-46QCC-X2XPY-3YG9M: desktop go to sleep monitor

Similar Questions

• Satellite Pro S300 - cannot extend the desktop to an external monitor

  Hello
  I have a Satellite Pro S300 and it won't extend the desktop to an external monitor / projector, but it will clone the desktop?

  so far I have tried:
  2 instructors and 1 projector all do the same thing, will clone but not extend.
  Reinstall the latest drivers to display on the Toshiba site.
  Reinstall the latest drivers of change on the Toshiba site.

  But nothing worked, I even checked my S300 colleagues to make sure that I use the same parameters and their (of 2 other s300) extend and clone office.

  Has anyone seen this before and how solve you the problem?

  Paul

  Did you first remove the old driver before you install the new driver? If this is not the case, try to reinstall the driver again. Therefore, to remove the old driver, restart the computer, use CCleaner to clean the registry and install the new version you can find on the Toshiba site.

  More I would try updating the BIOS. You can find it on the Toshiba site too.

  I hope it works for you.

• Choice of a model of desktop Inspiron for two monitors

  I didn't keep on computer hardware for some time and I found myself completely confused now that I'm looking to choose a new system that will support two monitors. It seemed simple at first, but now I'm a little worried that I'm missing something.

  In any case...

  I am looking to buy a desktop Inspiron model relatively inexpensive which allows two monitors. What should I look for to confirm the system that I'm looking will support two monitors? At first I thought that I would need to have a discreet graphics as opposed to something like the graphics card intel integrated, but some of the things I've seen seem to indicate the onboard graphics on some of the tips Intel will do what I need.

  I would mainly use for extended desktop just to be able to open MS Excel on both screens, but sometimes I wish I could watch my DIRECTV on one of the monitors (probably by logging into my DIRECTV account, as I do sometimes on my laptop).

  Hoping someone can give me an idea here.

  Thanks in advance!

  No, I don't say that all Intel adapters will work. The link I gave was a particular model Inspiron. Apparently the web page changed, because when I went back to it, the page was different.

  You buy a system with a card video of at least one of the monitors. Or, if you really want a cheap system, you can buy one that has only the onboard video and then separately purchase a USB > {video) dongle where {video} matches at least one port on the second monitor, for example USB > HDMI.}

• Impossible to extend the desktop to a secondary monitor

  Hello

  So I recently bought a new monitor, I have already been operating my TV.
  But now I want to be able to extend the display on my desk while watching TV on the internet, I can just do drag to my TV and sit on the couch instead of having to sit in front of my screen.
  I go to the screen resolution, and it detects that the two monitor are connected. The monitor (1920 x 1080) is connected to the TV (1280 x 720) with HDMI DVI.
  The two are connected by the GPU.
  But when I click on extend the desktop and then try to save an error message appears telling me that it is impossible to save these changes.
  I don't know what the problem is, the two screens are connected, the two works but I can not extend the display.
  My GPU is a 6950 Gigabyte, and it is updated to the latest drivers.
  If anyone can help solve me this problem I would be very grateful.
  Thank you

  Hello

  Error message "Cannot save the display settings" shows essentially that you try to extend or duplicate the Office for external monitors.  I suspect that the problem occurs because the computer remembers the two configuration for your extended monitor and TV.  To extend your monitor, you must delete the multiple configurations for your computer, then extend your display by changing your display settings. To do this, proceed as follows:

  The Troubleshooting Manual in the link above steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  Remove the registry key.

  a. press Win + R to open a run dialog box.

  b. in the run box, type regeditand then click OK.

  c. look for the following registry subkey:

  d. HKEY_CURRENT_USER\Software\Microsoft\MobilePC\TMM

  e. right click on the subkey, and then click Remove.

  f. When you are prompted to confirm the delete operation, click Yes.

  g. on the file menu, click exit to quit the registry editor.

  Log off the computer. Then, connect to the computer.

  Extend your display by changing the display settings.
  a. open the screen resolution by clicking on the Start button, click Control Panel, and then under appearance and personalization, click adjust screen resolution.
  b. click on the drop down next to several screens, click extend these screens and then click OK.

  For more information, see these articles.
  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

• HP Pavilion Desktop-550-110: Triple monitors?

  I have three 21.5 (1920 x 1080 resolution) inch monitors which have a VGA input. The computer I have has a hdmi, vga and USB 3.0 ports. Is it possible to have extended 3 monitors or I need a new graphics card.

  Hello

  The following link shows the specifications of your machine:

  http://support.HP.com/us-en/document/c04746474

  You certainly need more material and add a new card is the way to go. Please read the following article:

  http://www.Lifehacker.com.au/2015/01/how-to-set-up-triple-monitors-for-Super-widescreen-gaming-and-work/

  and

  http://multimonitorcomputer.com/top-4-best-videocard-for-multiple-monitor-computers.php

  Note: Yuor machine has only 180 W Μatx APFC power supply internal therefore, you also need a new power supply for your machine.

  Kind regards.

• Change the desktops sometimes causes reboot

  Hello! Since the upgrade to Sierra this morning, I found a pretty annoying bug. Several times I have "swept" my Magic Mouse to turn on my second monitor to desktop computers, my iMac mid-2011 restarts. Nothing seems abnormal in Mission Control, but I don't know where else to look for clues on how to prevent this.

  Does anyone else have this problem?

  Hi there HippieBoy!

  Welcome to the communities of Apple Support and thank you for bringing your question about your Magic Mouse having problems switching to the desktop on your second monitor and restart your iMac.  I love being able to use a second monitor and have my iMac spontaneously reboot would get old real fast for me.  It's my pleasure to help you today.

  If you go to System Preferences > accessibility and then remember to uncheck Reduce motion, which should fix this for you.  For more information on the Motion to reduce under macOS Sierra:

  macOS Sierra: reduce the movement of the screen

  Take care and have a great day!

• Desktop Compaq with Windows 7 no reconnect to the internet after the awakening of the mode standby

  Info on the computer: Compaq SG3-150SC desktop computer, processor is AMD Athlon (TM) II x 2 215 with 2, is 7 MHz, bios American Megatrends Inc. 6.01, 23.4.2010 SMBIOS version 2.6, RAM is 4 GB total. OS is Windows 7 64 bit edition Home premium + service pack 2.
  
  ON THE PROBLEM

  This problem has happened recently. Once I turn on my desktop mode computer "sleep", it cannot reconnect to the Internet and I use only cable internet which computer is connected via ethernet to the cable-internet-modem/router cable. The computer seems to be able to view all available networks, but she was never able to connect to the Internet (after waking up from sleep). At the same time that the computer seems to have slowed a lot, I have no idea why, but I guess he's trying to reconnect to the internet and this process of reconnection is devouring its resources.

  I had other problems with this computer during this past year the half, but will not go into great detail with them now. These problems have been losing some dll. file that was ment to display the Win 7 great/normal devices connected to the computer, and a total system crashes / freezes after having updated graphics drivers AMD ATI Radeon 3000. However these problems seem to have disappeared after Windows 7 service pack 2 update. Also, I scanned the computer several times with a well-known and apreciated overall software security, no virus or other major security problems have been found.

  The only problem that seems to have the computer right now is just this question, I am trying to solve.

  Any suggestions to check and make what?

  Hello:

  A few suggestions, you can try...

  1. install the latest driver W7 ethernet of the Realtek RTL8105E ethernet adapter to your PC.

  Download, unzip and run the application configuration of the 2nd on the Web page below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  2. go in Device Manager, expand network adapters device category.

  Left click on the Realtek ethernet card.

  Click the power management tab, and uncheck the box to allow windows to turn off this device to save power.

• Problem with "Extended desktop", integrated display is disabled

  Hi all

  I have a MacBook Pro 13 inch early 2011 with OSX El Capitan 10.11.4.

  Just before I upgraded to 10.11.4, I use to work with "extended desktop" using the built-in screen and the external monitor. Since the update, whenever I connect the external display it goes automatically to the external screen and completely disables the built-in screen. Sometimes removing the HDMI cable (with mini port adapter), putting the MacBook to sleep, log in again and the Mac, the awakening back on two screens, but most of the time he spends just go back to the external display only. This gets really annoying.

  When you use the external monitor display poster preferences only options of this monitor and my arrangement tab is missing (like the built-in display is temporarily disabled). By clicking on "Detect displays" (after pressing option to show) doesn't change anything. Using the brightness to toggle keys mirroring does not work either.

  Is - it there anyway that I can configure so worth by default "Extended desktop" with built-in monitor on and external display?

  Any help will be appreciated.

  Thank you

  Hi there Ajgalvezm,

  It seems that your computer does not work with your monitor external because you upgrade 10.11.4. I would use these steps in the following article to help you solve problems that:

  Get help with graphical problems on external displays connected to your Mac.

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Thank you for using communities of Apple Support.

• Can I use my 600-1050 as a monitor for a desktop PC?

  If I had to buy a desktop computer, it would be possible to use my TouchSmart 600-1050 as his monitor?

  How would I do that?

  Thank you!

  Howard

  No, it doesn't have the entries to use as a screen in this way.

  That being said, there are software applications that can extend your desktop to another PC/monitor and the Touchsmart could be this "another pc.

• Why can I not move programs between the 2 monitors with extended desktop?

  cursor will not move between monitors

  How to extend your Windows Vista desktop to a second monitor connected
  http://www.ehow.com/how_5330767_extend-desktop-second-connected-monitor.html

  I hope I could help

• How to set primary monitor in extended desktop

  Recently upgraded to Windows 7. I have a thinkpad t60 with mini port replicator. I am trying to use the extended desktop. I have an external monitor to my left and thinkpad on my right. I can't just to get extended working with my pad desktop think as primary monitor, so I have to keep moving all my icons to the external display to the left (and in front of me). How can I keep the prospect even monitors but just do my external monitor my primary monitor? Note I tried dragging the monitors in the window "Change the appearance of screens", but my cursor then moves in front of the prospect.

  Hello
   
  Here's how you can do this:
  a. right-click on an empty space on the desktop and click on the screen resolution.
  b. at the top, you will see the current main screen with the Start Menu in the lower left.
  NOTE: If you are unsure which monitor who is, then click on the button to display the number on the screen to match with identity.
  c. at the top, click on the numbered display device (ex: monitor, projector or TV HDMI) you want to make your primary display to have its established border highlight.
  d. check the brand that my hand display and click OK to apply.
  NOTE: You will notice that when you check this box, the Menu start now we in this numbered display.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• With remote monitor remote desktop connection on

  How to connect to the remote with both desktop (local and remote) monitor showing the same office. Basically, I want to show some procedure of the software to a person sitting near the remote desktop. If this option is available in desktop connection remote windows?

  Thanks in advance

  Vipin salvation,

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  View the Microsoft Help article below, this link has a video that you can play and learn how to use Remote Desktop connection.

  Remote Desktop connection: frequently asked questions

  Hope this information is useful. Thanks for posting for further assistance, we'll be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• Connect desktop HP Envy to TV

  Connected office model, HP Envy H8-1414, Vizio TV with HDMI. What I get on TV is the wallpaper on the PC and the bar at the bottom of the screen.  When I hear a movie, etc. I see it on PC screen, but does not change the image of the TV in the office. Anyone has an idea on what is causing this problem?  Thank you.

  I see that you use the extended desktop option which is the reason why you see the wallpaper on the TV but not the taskbar. Please move the window stream of film from this monitor to the TV using the mouse and maximize is there to display the display full screen of the TV. Some of the links that might help you.

  HP and Compaq Desktop PCs - connect a TV or monitor to your Windows 7 PC using HDMI

  How to connect a monitor or TV and adjust parameters when you use a HDMI connection.

  HP desktop computers - connection of monitors and TVs to your PC (Windows 8)

  How to configure and connect a monitor to your HP or Compaq PC in Windows 8.

  HP and Compaq Desktop PCs - connection of monitors and TVs to your PC (Windows 7)

  How to configure and connect a monitor to your HP or Compaq PC running Windows 7.

• vSpehere for desktop PC

  Understand VMware View Premier comes with vSphere for desktop computer bundle

  Can I know what is specific features I get View first?

  Example of what similar properties I get as below (standard/advanced/business)?

  http://www.VMware.com/products/vSphere/buy/editions_comparison.html

  for Q1) Yes, bundles of view include vSphere Enterprise more than features. the restriction I know is vSphere and vCenter in view bundle limited to desktop deployments

  "Desktop VM" is defined as the VM with the following OS: Windows 95/98, Windows 2000 Professional, Windows XP Professional, Windows Vista Edition full, business or Enterprise, Windows 7

  Exceptions to using ESX: View Manager, vCenter Server, a Broker for the connections and/or management and tools used solely for ESX hosted desktop VMs of performance monitoring.

  for the 2nd quarter), "vSphere for desktop" features are the same in both editions of the view

  hope I got your question right this time.

• Activity monitor close unexpectedly when running in the background on the left

  Recently upgraded to Mac OS Sierra and Activity Monitor to close unexpectedly when running back plan left (do not smoke and open the activity monitor window) to a blank desktop when you use an application in another office. Clean install I tried but the activity monitor would still be down at random times when left running in the background to another empty office. Someone at - there experience this problem? For most browsing on the web using Safari on another desktop computer when Activity Monitor quit unexpectedly.

  Activity monitor also using a lot of energy since the upgrade?

  Any help would be appreciated. Thank you.

  Model: MacBook Pro (retina, 13 inches, early 2015)

  OS: macOS Sierra: 10.12 (installed via the upgrade, own installed after this problem).

  Do not forget that you are using the activity monitor version which was installed when you upgraded to Sierra. Activity monitor located in the your Mac utilities folder.

  If you have moved a previous version to a different location, it will not work.

  If you are using the correct version, post crash report. Error reports lies in the application of the Console under System reports or reports from usersand end in the suffix .crash. If you choose to do so, omit or hide any information that you consider personal.