XLATEs do not delay

Similar Questions

• It does not delay the code for awhile?

  I have a piece of code where I'm looking for a flag to return true. I want to look for 3 seconds and then give up.

  long start = System.currentTimeMillis();int elapsed = 0;while (flag == false && elapsed < 3000){  elapsed += System.currentTimeMillis() - start;}
  

  When I run this code in the Simulator, he blows through it. I don't see a delay of 3 seconds. Same thing when running on a real device. Yet, when I look at the variable time elapsed after the loop stops, it is just above 3000.

  What I am doing wrong?

  Here's a glimpse of something that should work:

  Thread 1 logical:

  1. make stuff

  2. wait for "flag" to define

  3 do more things

  Thread 2 logical:

  1 sleep 3 seconds

  2. set the "Pavilion" and to notify other threads

  Event listener management logic:

  1. perform a normal event management.

  2. set the "Pavilion" and to notify other threads

  Main thread logic (event):

  1. turn off the 'Pavilion '.

  2. record the listener and start the threads 1 and 2

  Here's what that might look like in code (this is not fully tested):

  volatile boolean flag;Object LOCK = new Object();Thread t1 = new Thread() {
    public void run() {
      stuff();
      synchronized (LOCK) {
        while (!flag) {
          try { LOCK.wait(); }
          catch (InterruptedException ignored) {}
        }
      }
      more_stuff();
    }
  };
  
  Thread t2 = new Thread() {
    public void run() {
      try { Thread.currentThread.sleep(3000L); }
      catch (InterruptedException ignored) {}
      synchronized (LOCK) {
        flag = true;
        LOCK.notifyAll();
      }
    }
  };
  
  ActionListener listener = new ActionListener() {
    public void actionPerformed(ActionEvent e) {
      // handle event, then:
      synchronized (LOCK) {
        flag = true;
        LOCK.notifyAll();
      }
    }
  }
  
  public void doit() {
    flag = false; // do this first!
    // register listener as needed
    t1.start();
    t2.start();
  }
  

  As doit() does not block, it can be run on the event system without blocking thread to the top of the device (or your application). If for some reason you need stuff() and more_stuff() to run on the event thread, use Application.invokeLater () or Application.invokeAndWait ().

• Why my computer does not delay when I try to watch the video again? It's a constant start and stop and buffering?

  I get a lot of golf maaterials and lesson over the internet.  It became a real pain and a problem for me to keep up with instructions.  When I received instruction to internet and start to play the video it winds and winds and play them for a few seconds then start and stop throughout the presentation.  What can I do to fix this problem?

  If several computers are using the internet at the same time, it might slow down the video stream on a computer (laptop or desktop).

  Or your internet connection is simply not enough fast to stream the videos you want to watch. There are several different speeds for DSL, so the speed increase may help.

• I have problem with CoreAudio. I can not find help in the web...

  When I use built in Audio, Logic Pro X has delay when I push the stop button. When I stop, Logic audio game about 800 ms still... But the "play" button does not delay...

  

  

  Change the setting from automatic to 8 processing Threads or less

• problems with the implementation of MPC with system delays

  Hello

  I have Aproblem to implement a MPC controller for a system with significant delays. The final control system will be used with a RT PXI on an engine test bench, but for now, I'm running a few previous simulations to solve problems.

  The attached vi shows a simplified system for MIMO 2 x 2. When I run it with the default settings (initial window = 0; = 5 prediction horizon and horizon of control = 2; no delay of system, or delay of prediction model) everything works fine.

  However, if I understand a delay of the plant (time factory example = 10) the CPC shows a behaviour that is not clear to me:

  * If I put 'integral action?' false: MPC operates in open loop, and the MPC calculates (and apply) the same control in the system not delayed action. Of course, it cannot compensate for errors in modeling, is not really for me.

  * If I put 'integral action?' to true: System is not stable. for fixing it, I change the initial window at 10 (and therefore the forecast at 15 horizon). Although the system is now stable, the performance of the control is not really good, because significant overruns exist

  Then I try to include in my prediction model of the delay (through a block 'CD Set delays to the (State-Space) model'), but it seems that the PPC is not sensitive about the time defined in the model.

  Hepatitis could me?

  Thank you very much in advance,

  Carlos (Adama)

  (Note, in the attached example, in what I scored blue settings that I'm changing)

  Don't worry, I solved the problem myself including delays in the model defining additional States that aceted as souvenirs.

  I can confirm that the CPC does not takes into account the deadlines defined in the model of the SS.

• 20 second delay when connecting to the network of PCs

  We live a 20-second delay when you try to connect through Windows Explorer for some of the XP (SP3 and all updates if it excludes http://support.microsoft.com/kb/899409) PCs on our network.  For example, if I type \\10.10.10.7 in the address bar, it takes 20 seconds for the action to appear.  If I type \\10.10.10.7\Scans (a share on this PC), it goes through instantly.  I checked our Active Directory Windows Server 2003 DNS and forward and reverse zones look good.  I looked at the IP as the PC receive (10.10.10.n, 10.10.11.n, and 10.10.12.n) Windows DHCP server, and there is no correlation.  I tried to use different and checked the share and NTFS permissions user accounts, but this does not seem to matter.  I tried ipconfig, ping, tracert, arp, pathping, netsh diag gui and it all passes.  We have some PC located in work that work and other groups that do not work.  We have some PC related to our field that work and some that don't work.  We have some PC which sometimes gives behind us and sometimes we do not delay, we are certain that we always give delayed, and we never give us the delay.  We are in a high school environment, and the delay is causing many problems.  So if you have ideas on how to isolate the problem that could be appreciated.

  Then the index according to me lies in the instant connection on the one hand, but the 20 delay when you try to connect to the computer to see its actions.

  Thank you

  Mark

  Hello

  The question you have posted will be well suited in the TechNet forum. Click on the link below.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Drop-down list not reset default

  I can not get the dropdown to work as I need. All things considered, this seems to be the best control for what I need but I can't seem to restore the default option.

  When an option is selected, I perform an action in a text window. It is very good. But the option is selected, and if I want to perform this same option, once again, the request is ignored. Choose another option then go back and it's ok.

  What I want to do is a default option, just "select an option" is displayed after each selection.

  I can't understand any combination of sets/resets option indexes or slots that will do that for me.

  Well I just tried to not delay reset.

  No doubt you've already tried this, but only to avoid you through all combos yet would be some sort of delay (possibly QTimer like eloise suggested) into the slot of onSelectedIndexChanged drop-down setting SelectedIndex = - 1;

• Can't erase entry xlate

  I removed an entry static NAT. I erased the xlate table - a few seconds the static translation for the entry that I had just removed was back.

  The firewall did not remove the entry in the translation table

  Despite the fact that there is a 'clear xlate' command to clear the translation table which - nat entry would only disappear for a few seconds and then reappear. It was a system with the pix.

  I tried a specific "clear xlate " and then a global 'clear xlate"and not worked.

  This inherent flaw is proved by the fact that, during the restart of the firewall, the missing of the problem as well as the translation remain "disappeared". I'm sure you'll agree, it should not be necessary to restart the firewall to get rid of an input X and the end.

  Any tips or suggestions?

  The pix version is 6.3.1

  Thanks for your help

  Hello

  This is a known bug in 6.3.1 (bug CSCea84806ID)

  See the following link:

  http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BUGID=CSCea84806&cco_product=pix+Firewall&FSET=&swver=6.3&KEYW=&Target=1&train=

  Save the configuration and restart are workaround for this bug. The problem has been resolved in 6.3.2

  Kind regards

  Leo

• Setting of DELAY while primary crashed

  Hi all
  
  The needs of the application is to have 15 minutes LATE on standby, so that when disasters occur, the application you which propose to 15 minutes, how many minutes of archives to apply manually, IE point in recovery time.
  
  For database version 11.2.0.3 under linux, in a dataguard set up what is the behavior of the MRP, based on data watch if "DELAY parameter is defined and database main breaks down".
  The archives of delays will apply by MRP once the DELAY is over, or they will remain intact (so that these can be picked up manually at a given point in time)
  
  Please suggest.
  
  Rgds,
  Sanjay

  Hello;

  They will be applied.

  Delay does not delay the sending of roll forward. It simply indicates the process to apply to the target database.

  Source Chapter 2 of the manual on the custody of the data - page 84.

  So if you don't want to apply, you should stop the MRP.

  Oracle 10

  http://docs.Oracle.com/CD/B19306_01/server.102/b14239/log_arch_dest_param.htm#i77472

  Oracle 11.1

  http://docs.Oracle.com/CD/B28359_01/server.111/b28294/log_arch_dest_param.htm#i77472

  Oracle 11.2

  http://docs.Oracle.com/CD/E14072_01/server.112/e10700/log_arch_dest_param.htm#i77472

  Oracle 9

  http://docs.Oracle.com/CD/B10501_01/server.920/a96653/log_arch_dest_param.htm#77475

  If you set a deadline for a destination which in real time is activated, delay is ignored.

  Best regards

  mseberg

• Procedure runs in SQL, but not in my form of Oracle

  Hello. I have this code to send a warning message that the user is updating a file on my my form of Oracle database table. I use dbms_scheduler so that it is presented as a background task and so the treatment of electronic mail does not delay my Oracle to quickly record form. If I submit this code in SQL Plus, she runs and I receive the email as expected.
  

  begin
  dbms_scheduler.create_job (  
       job_name            => 'IMMEDIATE_JOB',  
       job_type            => 'PLSQL_BLOCK',  
       job_action          => 'begin TTMS.dropperVacationConflict_Notify (62547, ''01-SEP-11'', ''02-SEP-11''); end;',  
       number_of_arguments => 0,  
       start_date          => sysdate +1/24/59, -- sysdate + 1 minute  
       enabled             => TRUE,  
       auto_drop           => TRUE,  
       comments            => 'Immediate, one-time run');
  end;

  However if I submit this a subsequent update trigger code in my form, the code runs without error, but my email is never received (the same parameter values would be conveyed to this trigger):
  

  begin
  
  -- Submit the email notification in the background so as to not slow down the screen while saving.    
  dbms_scheduler.create_job (  
       job_name            => 'IMMEDIATE_JOB',  
       job_type            => 'PLSQL_BLOCK',  
       job_action          => 'begin TTMS.dropperVacationConflict_Notify (:dropper_vacations.dropper_id, :dropper_vacations.begin_dt, :dropper_vacations.end_dt); end;',  
       number_of_arguments => 0,  
       start_date          => sysdate +1/24/59, -- sysdate + 1 minute  
       enabled             => TRUE,  
       auto_drop           => TRUE,  
       comments            => 'Immediate, one-time run');
  end;     

  Any ideas why this might be happening?

  Oh, and of course after that you have a lot of other type conversions that may fail.

  Let's take a look. You propose the work like this:

  job_action => 'begin TTMS.dropperVacationemailurl_new ('||p_dropper_id||','|| p_begin_date||','||p_begin_date||'); end;', 
  

  p_begin_date and p_begin_date (why 2 times start date? in any case). are concattenated in a varchar2, so a type conversion occurs; the date format used is the nls_date_format of your session. If this will result to

  begin TTMS.dropperVacationemailurl_new (1234,01-FEB-11,01-FEB-11); end;
  

  now take this block and run it in SQL * more. I can see miles it won't work, because the date data types that you pass are not yet passed as strings.
  It might work, if you pass them as strings:

  begin TTMS.dropperVacationemailurl_new (1234,'01-FEB-11','01-FEB-11'); end;
  

  but then I say I just change the nls_date_format of my session and break your code, because the implicit conversion from varchar2 to date will fail.

  the very ugly solution for this should be

  job_action => 'begin TTMS.dropperVacationemailurl_new ('||p_dropper_id||',to_date('''|| to_char(p_begin_date,'dd-mon-yy')||''', ''dd-mon-yy''),to_date('''|| to_char(p_begin_date,'dd-mon-yy')||''', ''dd-mon-yy'')'); end;'
  

  If you have a tank that is converted to a date that you go to the external procedure which then gets converted to a tank which then gets converted to a date once again. My head hurts. If simply insert you dates into a table and select the dates in dropperVacationemailurl_new instead of 10000 conversions and pass them you wouldn't make 10000 converts and don't care the date format.

  see you soon

• CS2 shortcuts will not work

  Hello, recently bought my own copy of the software Adobe Photoshop CS2 after using my friends for awhile. I use a Saitek Cyborg keyboard, which worked very well before... but once I have rewiped my hard drive and reinstalled CS2, my shortcuts seem to not want to work more like the zoom with control + and control -.

  but they worked before.

  And when I'm not in the keyboard shortcuts, and it IS labeled as "Ctrl ++" and "Ctrl + -"... so I clicked on it and remapped to Ctrl ++... but it happens than ut Ctrl + M, Ctrl + k. who not overrride shortcuts of origin for M and K... "."

  So my keys are just wrong, or it came before? I have no idea where to remap the keys at... the drivers have been installed correctly because the keyboard works with everything but CS2 properly.

  In any case I hope I explained clearly enough... no help available?

  Orangekun wrote:

  That is interesting... they say that many copies of Ebay MIGHT be wrong... and we were at our get on ebay as well... There is a fix or does it just return it and get Adobe themselves?

  I'd say it's 99% some that you got one of the false copies. There are 100s of them and they all looked authentic with cellophane packaging, etc.

  CS2 is no longer available from sources normal (we're up to CS4 now).

  I would not delay trying to get your money back.

  Moral: If the price seems too good to be true it probably is not true.

• question about sync of drain plug and Eve delay block

  If a session in my primary database applies a large transaction, then it could cause to delay block drain plug, which is writing the changed blocks to the data files in the primary database will be delayed until an attempt is made to read them, now that they will be written to the data files. However redo generation for the big transacation is not delayed, nor is archiving, and so do it again is sent to the database Eve with a minimum of delay. It is not possible or even likely that the large transaction will have been written to pending data files then written to the primary data files? If so, is it important?
  
  Thank you.
  

• iMac no registration key shots

  Hi all. I have a new retina end of 2015 27 "iMac OS x 10.11.5. From time to time (maybe once or twice an hour, but not at intervals regular or repeatable), registry key traits not or not (sometimes) of mouse movements. I use a wired (USB) keyboard and mouse. I replaced the keyboard and mouse with those well known, and the problem persists.

  It's maddening, I'll be typing and for 2-3 seconds that all keystrokes will be lost simply (not delayed, completely lost), leading to a lot of characters and missing words as you type.

  I don't know if it's related, but I recently replaced an iMac running 2011 10.8. This all new iMac runs SIGNIFICANTLY more slow 10.11 than my 5 year old computer. It is slower in many tasks: Mail, Lightroom, startup time, etc. (and I use the external SSD same exact connected via Thunderbolt as I was on my old Mac, hitting 360 MB/s). For example, when you send an e-mail message, the message slides to the top of the screen, it is very slow and jerky. Display in Preview RAW files is literally 5-10 x slower than the 10.6 and 10.8. And I often get a spinning beachball in Lightroom, despite my being on the SSD RAW files. (None of this happened on my iMac for 5 years).

  I already deleted all the startup items or third party programs, I could find, trying to look at the logs ActivityViewer and Console, etc., but I can't diagnose the problem. It is a serious problem that affects my work, but I fear that if I take it to an Apple Store, it will take too long to reproduce the problem (I need to type for 30 to 60 minutes and if it happened that the worker would probably just say that I missed a few key or something). But it's happened since I bought the computer more than a month, same update 10.11.4 10.11.5 did not help.

  Any suggestion would be appreciated! Thank you.

  Please post a short log extracted corresponding to the time of an episode of non-response.

• How do I know the laptop model and my product number

  I want to know a shortcut to find the model of my laptop of HP, knowing that the laptop is not written by any number of model and product specific on the background data, and there is only one word «Pavilion dv6»

  Please do not delay in this response, because this subject is very important for many people

  Hallam-

  Try one of the options in the document on finding your product number or model number.

• Satellite L300-1AQ - slow start

  I bought one of these a few weeks ago. It takes more than three minutes to boot to the full desktop, I think that it is very poor. A friend has a non-Toshiba, which has a lower spec and it takes a minute. My son (even more low spec) Toshiba takes 1.5 minutes. I've already exchanged this laptop, but the alternative is just as bad - same again without installing any additional software. I contacted the assistance service, but they do not have much help telling me to use MSCONFIG and Google apps could be disabled - I've tried a few, but it made no difference. Most of the time is spent with a screen 'Please wait '.

  In my opinion a core 2 processor (T5800) with 2 GB of RAM it not delay it. If I can't get help from Toshiba or here then I will get a refund on this machine - much as I otherwise it - only 3 minutes to the loan is completely unacceptable, especially when it is lower spec machines are so much faster.

  Hello

  Many people here on this forum have reported the same. My answer is that you need optimal configuration of the operating system. If you have time, please take a look at thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=134947 where I described my experience with slow start.

  Please don't be confused because I write any other laptop model. In general this slow start is not mobile specific problem.