XMLHttpRequest cross-server

Similar Questions

• Problem with Server 2008 window after delete "pending.xml" not a good way.

  Hello

  Actually, I was stuck at stage 3 of 3 window 2008 Server Update. I solved this problem by performed only "del c:\windows\winsxs\pending.xml" on the installation disc - invite to dot. After that, I could access my desktop. But there was another problem occur as shown below:

  (1) I could update the file in the window, but I could not update the last update file that is the window Server 2008 previously stuck.

  (2) network icon shows no internet connection, but I have always seen my ip address in internet explore and remote computer could still connected, but displays error cannot access the office. I double click on the network icon, it shows "Unknow" "the dependency service or group could start. I can't not verification of diagnosis. It shows me start "policy and network access Service" in the Services. I try but pop up error message.

  (3) in the Server Manager, role summary shows Red Cross serving files, network and Access Services, Terminal Server Services strategy and the Web

  Server (IIS).

  (4) antivirus software cannot start properly.

  You have an idea to solve my problem?

  Thank you very much and best regards, Teresa.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Control of VCS and VCS expressway design

  I have a problem with the design of control and track Express VCS. Now, here's two VCS control and a highway. As you know, put on the Internet Highway and a control on my seat. At the same time, I want to put the other control on the management of my company which is in another city. Can it work correctly? How dose it work?

  You must create two zones on VCS Expressway crossing server and a customer journey area by control VCS.

  In other words, you should have a link path by VCS - C connection VCS-E separately.

  Please be sure to set different H.323/SIP port on each VCS - C.

  For example:

  VCS - C1 (Headquarters): area of traversal client pointing to VCS-E 6001 as port H323 and SIP traversal port 7001.

  VCS - C2 (branch): area of traversal client pointing to VCS - E with 6002 as port H323 and SIP traversal port 7002.

  VCS-E: a traversal server zone list for VCS - C1 (6001 as port H323 and SIP traversal port 7001) and other traversal server list for VCS - C2 (6002 as port H323 and SIP traversal port 7002)

• VCSC non-traversal license installation

  Hello

  I found info on Cisco telepresence video Communication Server Administrator Guide requiring a few keys options that VCS is restarted before the option key will take effect. In such cases, that an alarm will be triggered on the web interface, which will remain in place as a reminder until the system has been restarted.

  Anyone know if add additional licenses non-traversal VCSC Slave (cluster deployment) require really server restart?

  Thank you

  Petar

  Only the following option buttons require a reboot of the server:

  • Crossing Server
  • Starter Pack
  • Advanced Security for account (if it is moved in FIPS mode)

  This as well as other key option information is documented in the 'Manage the key Options' section of the VCS X8.7.2 Administrator's Guide from the pg 295.

• Connection between servers and opening default home

  Question about cross-server logon, if a customer has changed their rules of routing so that the default value at the opening of "wishes" is no longer used and a different call handler is used instead, will be this connection between breaking servers? Looks like that connection between servers using backdoor functionality (# and some numbers) which works with the 'Opening of wishes' system, I understand this right?

  No, it is not hardcoded to opening greeting Manager of appeal, but he needs to finish a greeting (whether for a Subscriber or call handler) - the logic is handled in the PHGreeting conversation (the guy that is used for the treatment of the call manager/subscriber wishes) - so if you have a routing rule that say, load the sign the Subscriber in conversation, then you're going to break.

  But as long as the call is handled by _some_ greeting, the hand of logic should work because the conversation PHGreeting is looking for a specific series of TTS to indicate that it is a grip of calls.

• Join the URI from outside the network

  Hello

  I have a problem to make a call from outside the network of phones internal using URI.

  If I test a call from outside (with Jabber video) to my URI ([email protected] / * /), highway E logs show:

  TVCS: event = "Call rejected" Service = "SIP" Src - ip = "IP address" Src-port = '5060' type-aliases-Src = Src-alias "SIP" = "sip:[email protected] / * /" Dst-alias-type = "SIP" Dst-alias = "sip:[email protected] / * /="Call-serial-number="aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeee" Tag "zzzzzz-Davis-0000-1234-xxxxxxxxx" detail = 'Not found' Protocol = "TCP" response code "404" = Level = '1' elements UTCTime = "2015-06-15 13:26:03, 214"

  If I check the call history, I see that my test call is not crossed:

  Source: sip:[email protected] / * /

  Destination: sip:[email protected] / * /

  Type: Non-traversal

  Protocol: SIP H323<->

  Status: 404 not found

  Step 1
  Area band bandwidth default node
  Alias 1 SIP of source:[email protected] / * / (Url)
  Target alias 1 sip:[email protected] / * / (Url)
  SIP protocol
  Address AAA. ABM CC. DD:5060
  TCP transport
  Not found a reason
  Cause 404

  Step 2
  Crossed bandwidth of Zone node (server)
  Target alias 1 sip:[email protected] / * / (Url)
  SIP protocol
  Address AAA. BBB. CCC. D:25793
  TLS transport

  Step 3
  Crossed bandwidth of Zone node (server)
  Alias target 1 [email protected] / * / (H323Id)
  H323 Protocol
  Address AAA. BBB. CCC. D:1719
  Unsaved pattern
  Destination not found cause

  My configuration:

  * X VLAN: CUCM 10.5 10.5 unit, 10.5 CUPS, ExpressWay C X8.5.1, highway E X8.5.1 (1 of 2 network adapter), DNS server, ad server

  * VLAN DMZ: highway E (the second network card)

  * Outside: External DNS

  (1) ExpC

  (a) areas

  Name	Type	Calls	Bandwidth used	Status of H323	SIP status	Status of search rule
  DefaultZone	Default zone	0	0 kbps	On	On
  CEtcp-[CUCM_PUB_IP]	Neighbor	0	0 kbps	Off	Assets	The search rules permit: 1
  CEtcp-[CYCM_SUB_IP]	Neighbor	0	0 kbps	Off	Assets	The search rules permit: 1
  Neighbor CUCM	Neighbor	0	0 kbps	Off	Assets	The search rules permit: 1
  Covered area (client)	Customer journey	0	0 kbps	Assets	Assets	The search rules permit: 2
  Covered area (UC)	Unified Communications crossing	0	0 kbps	Off	Assets	No rule search configured

  Jabber works both inside and outside.

  Details

  Name: Nearby CUCM
  Type: neighbor
  Hop count: 15
  H.323 Mode: Off
  SIP mode: on
  Port: 5062
  Transport: TCP
  Accept records submitted by proxy: enable
  Media encryption mode: Auto
  Support of ice: Off
  Authentication policy: do not check the credentials
  Trust of SIP authentication mode: Off
  Peer 1 address: CUCM_PUB_IP (-online green)
  Address of the peer 2: CUCM_SUB_IP (-online green)
  Profile area: custom
  Monitor the status of peers: Yes
  Call signalling routed mode: always
  Automatically respond to the H.323 research: Off
  Automatically respond to the SIP research: Off
  Send empty INVITATION of interoperability calls: on
  The poison SIP mode: Off
  Encryption of SIP mode: Auto
  Mode SIP REFER: forward
  Limit mode line SIP SDP attribute: Off
  Length limit of SIP SDP attribute line: 130
  Band MIME multipart SIP mode: Off
  Band of SIP UPDATE mode: Off
  Interworking SIP research strategy: Options
  SIP UDP/BFCP filter mode: Off
  SIP UDP/IX filter mode: Off
  Duo SIP video filter mode: Off
  Address record SIP road type: IP
  Proxy SIP-require header band list: white

  Name: Covered area (client)
  Type: Customer journey
  Hop count: 15
  H.323 mode: on
  Protocol: enforcement
  Port: 6001
  SIP mode: on
  Port: 7003
  Transport: TLS
  TLS check mode: Off
  Accept records submitted by proxy: enable
  Media encryption mode: Auto
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  Customer settings stimulus interval: 120
  Peer 1 address: ExpE_IP (-online green)
  Address of the peer 2: expe.mydomain.fr (-online green)

  Name: Trasversal area (UC)
  Type: Course Unified Communications
  Hop count: 15
  User name: qwerty
  Password: *.
  SIP port: 7001
  Accept records submitted by proxy: enable
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  Customer settings stimulus interval: 120
  Peer 1 address: expe.mydomain.fr (-online green)

  (b) research rules

  Priority	Name of the rule	Protocol	Source	Authentication required	Mode	Type of rehearsal	Pattern string	Behavior model	On match	Goal
  45	CEtcp-CUCM_SUB_IP	FT3	Any	NO.	Alias matching	Prefix	CUCM_SUB_IP; Transport = TCP	Leave	Stop	CEtcp-CUCM_SUB_IP
  45	CEtcp-CUCM_PUB_IP	FT3	Any	NO.	Alias matching	Prefix	CUCM_PUB_IP; Transport = TCP			CEtcp-CUCM_PUB_IP
  50	LocalZoneMatch	Any	Any	NO.	Any alias				Continue	LocalZone.GetDaylightChanges
  100		Any	Any	NO.	Any alias				Continue	Covered area (client)
  100		Any	Any	NO.	Any IP address				Continue	Covered area (client)
  100		Any	Any	NO.	Alias matching	Regex	(3\d{3})@mydomain.fr(.*)	Leave	Stop	Neighbor CUCM

  (c) changes of

  Change the destination to the URI format alias
  ([^@]*)
  Replace
  ------[email protected] / * /

  CUCM IP to the domain
  Regex
  (. *) @(AAA\.) BBB\. CCC\. D | AAA\. BBB\. CCC\. D)((:|;).*)?
  Replace
  ------[email protected] / * /\2

  Convert domain Unified CM provided until highway information
  Regex
  (4\d{3})@expc.mydomain.fr(:.*)?
  Replace
  ------[email protected] / * /

  (2) experience

  (a) areas

  Name	Type	Calls	Bandwidth used	Status of H323	SIP status	Status of search rule
  DefaultZone	Default zone	0	0 kbps	On	On
  DNSZone	DNS	0	0 kbps	On	On	The search rules permit: 1
  Covered area (server)	Crossing Server	0	0 kbps	Assets	(Connections noactive)	The search rules permit: 1
  Covered area (UC)	Unified Communications crossing	0	0 kbps	Off	Assets	No rule search configured

  Details

  Name: Area covered (server)
  Type: Server covered
  Hop count: 15
  User name: qwerty
  H.232 Mode: on
  Port: 7003
  Transport: TLS
  TLS check mode: Off
  Accept records submitted by proxy: enable
  Media encryption mode: Auto
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  UDP retry interval: 2
  Number of UDP attempts: 5
  UDP keep alive interval: 20
  TCP retry interval: 2
  Number of attempts TCP: 5
  TCP keep alive interval: 20

  Name: Covered area (UC)
  Type: Course Unified Communications
  Hop count: 15
  User name: qwerty
  SIP port: 7001
  TLS check the name of the object: expc.mydomain.fr
  Accept records submitted by proxy: enable
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  UDP retry interval: 2
  Number of UDP attempts: 5
  UDP keep alive interval: 20
  TCP retry interval: 2
  Number of attempts TCP: 5
  TCP keep alive interval: 20

  (b) research rules

  Priority	Name of the rule	Protocol	Source	Authentication required	Mode	Type of rehearsal	Pattern string	Behavior model	On match	Goal
  50	LocalZoneMatch	Any	Any	NO.	Any alias				Continue	LocalZone.GetDaylightChanges
  100	Search of covered area rule	Any	Any	NO.	Any alias				Continue	Covered area (server)
  150	Search for DNS zone rule	Any	All areas	NO.	Alias matching	Regex	(?. *@%localdomains%.*$).*)	Leave	Continue	DNSZone

  (c) changes of

  Change the destination to the URI format alias
  Prefix
  ([^@]*)
  Replace
  ------[email protected] / * /

  Hey Denis,

  It seems that you might have some problems.

  • VCS - C you have a search rule that targets CUCM, but it does not perhaps not for you for 2 reasons.
  1. It's the same priority as your rule of research area of course which may cause routing loops. Change the rule for targeting priority CUCM 100 to something between 50 and 100.
  2. It will only forward calls to CUCM which begin with a 3 and are followed by 3 numbers ending by mydomain.fr(.*). If you are URI calls that do not match this pattern, they will not be sent to CUCM. Make sure to set your match of regex to include your models DN so that your schemas URI incase they are figure not URI.

  Make these changes, and you may have more luck. Make sure also that your CUCM is configured to allow the composition of the URI. Ensure that the device that you are calling has a URI configured on the line.

  Once you make these changes to retest a call. If that fails, send the history research of the failure of the attempt. You can find it on the VCS under status > Search History.

  -Chad

• A VCS - C with two clients of course to the two different VCS - E (traversal servers)

  Hello

  Can I have a WHAT VCS - C connected to two different VCS-E?

  So, I will configure two 'route customers' VCS - C each pointing to VCS - E, and each VCS-E will have a 'crossing server' set up.

  Hello Jose,.

  Yes, it is possible, you can have several customer experience (and also servers traversal) on each VCS.

  Jens: there is an abundance of deployments where this would be wise. A cluster can have meaning where you need a logic of instance, which is be of multiple physical boxes.

  We have customers who need an environment safe, so that they have a VCS - E for outbound communications, generic endpoints and then VCS-control a VCS-E for another network to terminate VPN connections internal who couldn't talk directly inside.

  There was one other poster here recently where a company had a VCS - E + C Setup, the other

  C only, so that they could use a VCS-E talk to each other.

  But even in the same network where you want to cluster, but you cannot due to

  various geolocations with much delay between the sites...

  And so now ;-)

• Telepresence system questions

  Dear all

  I IX5000, MX 800, call control system (see the table below), 410 MCU, addition of license for CUCM 9.x/10.x, 14.X and TMS BE 7000 QTY: 2 with Hyper ver 5.X

  My Questions are:

  (1) concerning the call in the table control system, I think it's a fast track, need to install software E-Highway and Express-C track or all I need just install Expressway-E?

  (2) unit that will fit with CUCM and how it will be, trunk or there are in addition to the configurations are needed?

  (3) concerning MSDS server, what configuration I'll choose Provisioning or others?

  (4) regarding the IX5000 and 800 MX, it will record in CUCM, right? CUCM has IX5000 and MX800?

  (3) call control system
  LIC-EXP-GW	Turn on GW (SIP-H323)
  LIC-EXP-AN	Enable the Advanced Networking Option
  LIC-EXP-E	Activate the Expressway-E feature set
  LIC-EXP-SERIES	Turn on the game series features Expressway
  LIC-EXP-TOUR	Turn on relay TOWER
  LIC-SW-EXP-K9	License software encrypted key
  LIC-EXP-E-PAK	Lane Express series, Expressway-PARISI
  EXPWY-VE-E-K9	Cisco Expressway-E Server, Virtual Edition
  EXPWY-VE-C-K9	Cisco Expressway-C Server, Virtual Edition
  SW-EXP-8. X K9	Software image for highway with encryption, Version X 8
  LIC-EXP-RMS	Rich Media Express session

  I thank.

  (1) concerning the call in the table control system, I think it's a fast track, need to install software E-Highway and Express-C track or all I need just install Expressway-E?

  -You need two motorways (C & E) to work in the solution. The two boxes are part of the infrastructure of collaborative Edge and the solution will not work if a box is missing. Edge of collaboration (Expressway Core + Edge) are part of the environment of CUCM mobile and remote access and management of B2B calls.

  (2) unit that will fit with CUCM and how it will be, trunk or there are in addition to the configurations are needed?

  -Track Express Core will be interfaced with CUCM via SIP trunk. And when you enable mobile access and remote (ARM) and B2B calls, you must create 2 separate crossing (ARM 1) areas and 1 for B2B on Core (traversal customer) Expressway and the highway (crossing server).

  Here are the guides of good deployment:

  For Mobile and remote access with the B2B deployment guide:

  http://www.Cisco.com/c/dam/en/us/TD/docs/solutions/CVD/collaboration/Midmarket/Oct2015/CVD-CollabEdgeUsingBE6000.PDF

  For the Mobile deployment and remote only access:

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/Expressway/config_guide/x8-7/mobile-remote-access-via-Expressway-deployment-guide-x8-7.PDF

  (3) concerning MSDS server, what configuration I'll choose Provisioning or others?

  -Can you clarify what you want to achieve in the deployment of the TMS? Planning/Booking? Phone book?

  (4) regarding the IX5000 and 800 MX, it will record in CUCM, right? CUCM has IX5000 and MX800?

  -Depending on your BOM and licenses, the solution is a highway. The highway do not support records. All the video end points will record on the CUCM. Endpoints immersive (IX500) and a versatile video endpoints (MX800) are supported in CUCM and will be managed these endpoints for the call control points.

  Please refer to the compatibility CUCM for supported devices matrix:

  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_00.html

  Kind regards

  Acevirgil

  Please indicate or mark as correct answer if this post is useful.

• [RMAN BEGINNER] Backup and recovery

  Hi all

  Can I ask a question?

  1. they are the same ARCHIVELOG = newspapers archived DB log?

  2. can I use the tracking order cross server

  #Server 1

  RMAN > run {}

  immediate stop

  Startup mount

  allocate channels disk1 disk format='d:\backup\ora_d%_%T.bak'

  backup current controlfile

  database backup and archiving log

  }

  # Server 2

  RMAN > run {}

  allocate channels disk1 disk format='d:\backup\ora_d%_%T.bak'

  restore database

  output channel disk1

  }

  I have to create before catalog?

  (1) logs archiving is essentially a copy of your recovery logs, once it is filled.  Archivelog and db archivelog terms can be used interchangeably, but essentially in a database there is a redo log, then a newspaper archive.

  Archives Redo Log Management

  (2) what do you mean cross server?  Tell you backup a database on a server and then restore to another?

  If so then Yes, you can back up a database on a single server and restore to another.  If your database is in archivelog mode, then you don't need to stop the database first.

  http://docs.Oracle.com/CD/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814

  Before you launch your start command to restore your database in nomount mode, restore the controlfile, set up the database and then do your restore, recover and then open resetlogs:

  SQL > startup nomount

  RMAN > restore controlfile from "xyz";

  SQL > bootable media.

  RMAN:

  Run {}

  restore the database;

  recover the database;

  ALTER database open resetlogs;

  }

  (3) you do not need a catalog of recovery, RMAN will use the controlfile.  However, if you have several database in your environment, you can use a recovery catalog.

• DNS server and mail cross-site fell down.

  After restarting the Windows Server2008, the DNS server and mail cross-site not may start automatically. So I want to start these two are manual. There is no information in the log file or no code error on this issue. How can I solve this problem? Anyone knowing the solution please answer me. Waiting for your valuable suggestions.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Repost in the above Forums Windows Server 2008.

  These are the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• use XMLHttpRequest with address of the server variable

  I have a connundrum.

  I develop an application WebWorks for BB10, in which he performs XMLHttpRequest GET funcitons to send a http message to a server to communicate information at determined intervals.

  Here's the problem: the address of the server that receives GPS messages must be specified by the user within the application itself, depending on their configuration (they usually set up their own host / server).

  So I can't put any http://www.theirserver.com ' / > info in my config.html, because it is specified by the user running.

  And is not a solution, which will still allow no requests via XMLHttpRequest.

  Do I have other options at my disposal to allow that works the way you want?  I have considered using a web proxy to a fixed address to work around the problem, but I would use rather than as a VERY last resort.

  Thank you very much

  Ray

  You can disable the blacklist/white list Ajax altogether, using the following:

  As mentioned in the documentation, this feature is only a convenience of development. In production, all URIS must be known and should be in the whitelist using the element. But for the dynamic AJAX requests, I do not see otherwise.

  https://developer.BlackBerry.com/HTML5/documentation/param_element.html

• Development crossed with the VI (LV8.6) Server

  I'm moving a heritage project of LV 7.1 to 8.6.1. It is a system distributed by using VI server to move data by calling a VI receiver on the other machine via a VI server. The two partners are running on different Windows PC.
  I do development with separate licenses of LV-development on both computers. The two will be eventually moved to the executables.

  As new server VI, I noticed, that when I start the main VI outside the project, the VI exported is recognized. When I start the main project VI, as I normally would the VI is not visible for a stand-alone VI local or remote computers.
  Maybe it's because the project is an instance of the application of its own, but when I try to turn on the option 'My computer' VI-Server-TCP with port being 3363. I get an error "use current port".

  Which leads to the next question: How do executables communicate through server of VI. Do I have to specify an explicit 'Application '.

  The Vi server can be cancelled for performance in do it again, but it would be good to know how to handle this set upwards.

  Thank you, Gabi

  Really, the problem is that you have two instances of VI-Server.
  1. outside of the project, which is accessible through the tool-> options on the menu bar of the project.
  2 inside of the project, which is accessible through the properties of "my computer."

  If you turn on the outside with the standard port 3363, you can't activate the same port inside.

  A little confusing, it's also that you do not see the actual published game live accessible in one list. Better is to do it programmatically via the Application-> Server properties.

  See you soon
  Gabi

• Flash as2 cross subject to access the SWF from another server domain

  I have question cross-domain, how do I access the .swf from another swf file without using System.Security.allowDomain() in the swf file, which we are called.

  I use 2 domains and I have 2 files swf is a.com (a.swf) and another is of bcom (b.swf) I want to access the file the a.swf b.swf frames, if I use the system.Security.allowDomain() in b.swf file I can access executives. But without using this way I can access the file from another domain.

  Because I have a risk to change the file b.swf so I vant to go without changing the file b.swf is any other wey to access frames of the file the file a.swf b.swf. Please someone help me solve this problem.

  use a local executable (such as php) to load the b.swf and send it back to a.swf.  for example:

  loadSWF.php:

  <>

  $fh = fopen ("www.b.com/b.swf", "r");

  Header ("Content-type: application/x-shockwave-flash");

  fpassthru ($FH);

  ?>

  a.fla:

  var target_mc:MovieClip=this.createEmptyMovieClip("target_mc",this.getNextHighestDepth());

  target_mc.loadMovie ("loadSWF.php");

• XMLHttpRequest #18 DOMException (SECURITY_ERR)

  I test the same application in a Web Widget and within the Web of BlackBerry browser to the native address, and I get errors of strange security on the Web version.

  I use XMLHttpRequests, and my understanding is that those who are allowed so that the script that performs the application is hosted on the same server as the service, that she asks data.

  In my case, that I get a DOMException #18 eventhough (SECURITY_ERR), the script and the resource it accesses are in the same domain (subdomain)

  Of course, frustrating is that the same code on iPhone and Android (and of course a desktop browser) works perfectly.

  Is it possible that this error is actually hide a different problem with the BlackBerry browser? Tested with both the Simulator with 9550 (5.0.0.469) and a real device...

  Help!

  OK, for the benefit of other developers. The BlackBerry browser does not support the original resource Cross W3C standard sharing :-( (http://www.w3.org/TR/cors/)

  But it seems to apply origin cross-the location of the html, not the script file...

  I'm serving everything one host through a magic of apache.

  oO

• When you transfer large files of network, all other requests are not sent to the server

  In our application, we are facing a weird scenario where we try to download a huge file(600+ MB) of the network, all other requests (AJAX) are getting blocked. But when the same file is downloaded from the local location (drive E) so that everything works fine.

  How do you download the file via the network?

  If you want to solve the bandwidth? and the nets where a process takes previous on the other, you will have to troubleshoot the QoS of the network on what see you.

  To give a better visual, please, use Firebug or Web Developer tool, called network analysis applications. The "XMLHttpRequest" will give better clues for Ajax. Reference http://ajaxian.com/archives/ajax-debugging-with-firebug

  There may be a topic: configuration option that allows persistent connections per server, you can check mutithreading or max.