XP is not properly start on login.

Similar Questions

• I started receiving messages that Windows Installer service is not properly installed when I try to install a program.

  installation of Windows in windows xp service

  I started receiving messages that Windows Installer service is not properly installed when I try to install a program.
  Running XP Home edition.
  I tried to install Windows Installation Service 4.5 but that doesn't seem to make a difference
  I also tried unsubscribing/re-enrollment msiexec.exe and that doesn't seem to make a difference.

  I tried to reinstall my HP scanjet 4890 software but complains the installation Windows installation service.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso3

• Outlook Express could not be started because MSOE. DLL could not be initialized. Outlook Express is not installed properly.

  Original title: could not open error on my outlook express Message

  When I try to open outlook express, I get the following two messages.  Outlook express could not be started.  The application is not in the message store outlook express.  Your computer may be out of memory or your disk is full. I cleaned the disk and I still get this message.  I also have another message saying Outlook express could not be started because MSOE.dll Outlook is not installed properly.

  Pleae help

  Is MS Outlook or Office installed also?

  If so, see this.

  See the reference by PA Bear in this thread
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995

  If Outlook is not installed:

  When OE crashes or won't start
  http://www.insideoe.com/problems/errors.htm#crash

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I use XP and when I try to open Outlook Express I get this message. "Outlook Express could not be started because MSOE." DLL could not be initialized. Outlook Express is not installed properly

  Last night, everything seemed normal. When I try to open Outlook Express, I get this message. "Outlook express could not be started.  The application could not open message store outlook express.  Your computer may be out of memory or your disk is full.  Contact Microsoft Support for assistance. (0x800700C1, 193) "after this message, the message above was posted. I bought and ran a program called FixCleaner with the same results. I also cleaned my disk and more 66 G remains to use and have a lot of available memory.

  Thank you all for your help, but I gave up and took it to my computer guru and fixed it. He said there where a few old accounts in the computer and registry was messed up and it solved the problem and now it works.

  THANKS again!

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• Monitor display is not properly in Windows XP sp3

  Original title: Windows xp sp3 does not properly

  Hello, I do not know if this issue belong to the material division of the forum. I have an old system who have windows xp sp3. It was working fine until week couple but after a few days when I switched it on the screen is not displayed correctly.

  All the colors randomly displays as a spot on the screen and the other letters in a sentence is missing. I tried in safe mode with just visible in debug mode, but it doesn't happen in the journal to the screen. I can not even reinstall windows xp. Now I'm not able to understand if it's the problem of the operating system or a malfunction of certain components of the computer. Please help me.

  Thanks in advance.

  Hello

  Method 1:

  I suggest you to start the computer using the VGA Mode.

  (a) restart the computer

  (b) press F8

  (c) in the start menu

  (d) choose the option

  (e) activate the VGA Mode

  This option starts Windows in mode 640 x 480 using the current video driver (not Vga.sys). This mode is useful if the display is configured to a setting that the monitor cannot display.

  Reference:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  If you are able to start the computer using the VGA Mode, you can perform a system restore to the date where the computer worked well.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point if any. You can also create Safe Mode system restore points. System Restore affects the Windows system files, programs and registry settings that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  If the problem persists, you may need to contact the manufacturer of the monitor to the stand.

• Windows Live Mail could not be started. 0 x 80041161. question of server 2008 in Vista (similar OS) forum

  Can't solve this one.  8 user accounts on Server 2008 std 64 bit TS, using the Protocol of the DRC. Load Windows Live, composing Mail only for all users. Properly configured the e-mail accounts for all users except one.  On this account while trying to open the Live Mail, we get:

  "Windows Live Mail could not be started.  It cannot be installed correctly. Make sure that your disk is not full or that you're not out of memory. 0 x 80041161."

  All accounts connect via thin clients with user, no HD local licenses. How it is possible for a single user? How to remove all traces of this user's e-mail account and try again? 7 other user accounts were active mail.  A possible cause would be my use of a registry cleaner (perhaps not a good idea because it was not necessary for a specific reason).  Otherwise, nothing unusual, all other services Terminal Server and programs work.  Impossible to find a link to how to erase our all that is giving only this user account for Live Mail error message.  Tried to take Windows Live and not reinstalled, pass.  All users have standard access, raise that this user admin didn't change error.  Appreciate the ideas.

  Hello

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Technet Forum.

  You can follow this link to ask your question:

  http://social.technet.Microsoft.com/search/en-us/Windows?query=server%202008&refinement=1002&beta=0&AC=5

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

  Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

  I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

  We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

  I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

  Please notify.  We are clueless.  Thank you.

  Hello

  What troubleshooting steps you have done until now?

  Click on the link below and run the fixit.

  Method 1: Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

  Disable and enable Windows Media Player and check if it opens.

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; clear the check box Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  Note: If windows media player is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; Check the Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  This would be re - install windows media player 12.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue.

• Error at any time update or download - "windows service install could not be found windows install is not properly installed.

  Windows automatically attempts to update and restart the same updates again and again, now it does not update Safari either.

  I have the Fix it Center, but it is not solved the problem

  IT IS NOW TELL WINDOWS SERVICE INSTALL COULD NOT BE ACCESSED, WINDOWS INSTALL IS NOT PROPERLY INSTALLED.

  Make sure that the Windows Installer Service is started:

  1. Click Start, type Services.msc and press {ENTER}
  2. Double-click on Windows install
  3. The Startup type of Windows install the Manual value
  4. Click Start to start the service.
  5. Click OK.

  If there is an error message, write it down and post back if not try and make the updates again.

  See also: Fix the problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

• Audio files do not properly burn on a CD

  Audio burning CD wrong!

  I have a windows vista laptop. Suddenly my music does not properly burn on a blank comm. It has always worked before.  Now when I try to play a disc there only a track at random on it.  Nothing else is burning to disc.  What can I do? Also, if I try to read the disc in my cd player it's just noise terrible static/interference!

  Hi magalihamel,

  1. what applications do you use to burn CDs?

  2. you remember to make changes to the computer, after which the issue started?

  I suggest you burn CDs with Windows Media Player. If you encounter the same problem with Windows Media Player, then I suggest you to try to reduce the burn speed and check if it helps:

  Change settings for burning a CD or DVD in Windows Media Player

  In addition, have a look at the link to the following article:

  Burn a CD or DVD in Windows Media Player: frequently asked questions

  I hope this helps.

• When I turn on my computer a warning appears indicating "delivery manager does not properly.

  DEP original title: data

  When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.

  Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.

  Hi Olliewoods,

  (1) since when are you facing this problem?

  (2) what is you receive the exact error message?

  An application installed on the computer may be the cause of this problem; I suggest you try the following steps:

  Method 1: Put the computer to boot to determine which application is causing the problem.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below for more information on Data Execution Prevention
  Data Execution Prevention: Frequently asked questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP G6 2240-sh gpu drivers does not properly

  Dear HP,

  I bought a HP Pavilion G6 - 2240sh C6C63EA 3 months ago. I am quite satisfied with the performance of every day, but I always had problems with the display drivers. I have Windows 8 X 64 pro and a Windows X 64 pro also 8.1.

  First I used it with Windows 8 with the latest drivers, which was available December 2013. Then I formatted my HARD drive (after a nasty virus) and clean then installed Windows 8.1 X 64 pro, so that the latest operating system. Since then, I have problems.

  There is no problem with the Intel HD4000, but the Radeon 7670 m did not work properly. I tried several drivers on the HP support site, the most recent is: AMD HD 1020-1022.

  When I pass any application (with a right click on graphics cards to office/switch) to use the Radeon it hangs or does simply not. VLC crashes always, Wolf Among Us does not even start.

  With the Intel card everything works, games included. My system says every time you start upward: "driver load.mm has just stopped working" (, so the there is a problem with the Radeon driver).

  I got fed up with this, formatted my HARD drive and then reinstalled Windows X 64 pro 8.1. Now, the system does not display this error: "load.mm driver has stopped working", however still applications do not work. It's the same as it was. But when I want to install the latest graphics driver Intel high definition (HD) it says: 'this machine does not meet the minimum requirements. I installed the latest .net also, but the error is the same.

  I found a guide here in this forum. I need to install the drivers in a specific way:

  1 Intel Chipset Installation Utility and driver, then restart

  2 Intel Management Engine Interface (MEI), then reboot,

  3. high-definition (HD) Intel Graphics Driver

  but at this point, I'm working in the same problem: "this machine does not meet the minimum requirements.

  In the Device Manager the Intel HD 4000 driver is present and functional.

  After that, I installed the Radeon driver. At startup, there is no problem, but when I go to use the radeon card of the problem previously. For example: VLC crashes, the games do not work.

  In summary: I normally use the intel VGA, but I can't use my Radeon card.

  After that, I tried the same process with Windows 8 X 64 pro, but the problem is the same. I even used former official HP Intel vga drivers, the message is the same: 'this machine does not meet the minimum requirements.

  I even tried the latest generic Intel driver. After you change manually the driver in Device Manager, driver setup intel a run and after a reboot the driver intel worked properly. However the Radeon driver still did not work. I can't even install a gereneric official AMD driver.

  Please help me to solve my problem. I am full of ideas. I would like to play games and watch movies BD with my Radeon card, but it does nothing like it.

  Thank you very much for your answer.

  However, I was able to solve the problem. I formatted the HARD drive again then install Windows 8 x 64 pro, then chipset inf, intel mei, then driver intel vga (he couldn't install again). After that, I installed all the drivers for windows 8 HP 2240sh and installed all windows updates. After each driver installation, I restarted the computer.

  Now it seems that everything is fine with my Radeon card, can I use it with games, video players and all, load.mm problem does not appear. The Intel card is also correct. Media Center is present in the Panel Intel and work (9.17.10.2849).

  The reason that I don't know, since I have tried to use these two drivers (what driver versions are different):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111605-1&CC=Hu&DLC=Hu&LC=Hu&OS=4132&product=5319684&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124655-1&CC=Hu&DLC=Hu&LC=Hu&OS=4158&product=5319684&sw_lang=

  Windows Update didn't download driver Intel (only realtek and synaptics)... This is strange.

  Best regards

  PS: I uninstalled the Radeon drivers, restarted the computer then used the tool that that you pointed out. He installed the generic AMD driver and it worked, but I could not switch graphics cards because the menu doesn't show after right click on the desktop. So I uninstalled, then used the official HP driver which works very well now.

• What should I do so that I can make a routine (monthly) BACK to the top without having to allow a program that is not properly validated?

  Since July of this year, when I try to back up my computer to HP Envy 17 laptop I get a pop-up window asking if I want to allow the following program to make changes to my computer.  The program is: Microsoft Windows Backup/Windows Hardware Driver verification / valid from 07/12/2009 to 03/07/2011.  Because the validation is obviously outdated, I consider the program run out of appropriate verification, but I can't back up my computer without the program.

  Hewlett-Packard said the problem probably occurs because the computer was missing an update of windows.  Updates happen automatically without my intervention.  I bought the new computer, directly from HP in the month of August, 2011 (after the date of validation of program pop up) with Windows 7 Ultimate installed and had no problem backup of my files to a CD until July of this year.  I believe that the problem may be the result of a rather than a missed update windows update.  What should I do so that I can make a routine (monthly) BACK to the top without having to allow a program that is not properly validated?

  Since July of this year, when I try to back up my computer to HP Envy 17 laptop I get a pop-up window asking if I want to allow the following program to make changes to my computer... [Posted Sept 27-12]

  At this point, the problem of slower Internet connection and loading is probably resolved.  I wanted to try the simpler remedy without doing unnecessary downloads.  Fortunately, there is a Windows update that created a restore point the day before the problem occurred.  I restored the system to this date, and the problem disappeared... [Posted 03 Oct-12]

  Sorry, but I can't say what the problem is (or was) or when he started - especially since the moderator community Smittychat [or another Mod?] decided to merge your two threads. Maybe it can help you?

  I can tell you that v11.3.300.268 Java Version 6 update 32 and Flash Player are very badly outdated & subject to thousands of security vulnerabilities .

  Get Java Version 7 Update 7 installed (or higher) & all previous versions (for example, v1.6.0_32) removed as soon as POSSIBLE!  Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46263

  When finished, remove your Java cache by http://www.java.com/en/download/help/plugin_cache.xml

  Download Flash Player v11.4.402.278 installed as soon as POSSIBLE, also!  See this page-online http://aumha.net/viewtopic.php?f=26&t=46252

  Good luck!

• ORA-01079: ORACLE database was not properly created, operation canceled

  Hi all
  On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  
  My problem is that I have to delete the database as the same is not created correctly.
  To do this, I get the error when I try to mount the database below.
  
  ORA-01079: ORACLE database was not properly created, operation canceled
  
  Also, when I started the database by specifying the file pfile, he threw out saying error
  ORA-00202: control file: ' D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB. ORA'
  
  When I specified control_files clause in init.ora, that I was getting above error, so I tried to remove the same but still facing the same error.
  
  Can someone help me solve the problem...?
  
  Thank you

  ROCs Rossy says:
  Hi all
  On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0

  My problem is that I have to delete the database as the same is not created correctly.
  To do this, I get the error when I try to mount the database below.

  ORA-01079: ORACLE database was not properly created, operation canceled

  Also, when I started the database by specifying the file pfile, he threw out saying error
  ORA-00202: control file: ' D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB. ORA'

  When I specified control_files clause in init.ora, that I was getting above error, so I tried to remove the same but still facing the same error.

  Can someone help me solve the problem...?

  Thank you

  You should be able to do the following on the command line windows

  oradim -delete -sid sampledb
  

  then remove the D:\ORACLE_10G\DATABASE\ of the file system folder (assuming that there are only records your db in there.
  Finally, delete the D:\ORACLE_10G\ADMIN\SAMPLEDB folder structure assuming it exists.

  Niall Litchfield
  http://www.orawin.info