XP will not work after patch

Similar Questions

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• I use Mac OS 10.4.11 and after downloading firefox 4.0, I get a circle + bar symbol oblique covering the logo of firefox - and it will not work after copy in my applications folder. What is the problem? Had to reinstall 3.6

  I followed the instructions on the screen to download firefox 4.0. After the launch of the dmg image in the window of firefox dmg is the symbol of firefox with a "do not go" symbol on it (for example as a sign of the universal movement for "don't go this way" - red red circle with a diagonal line). "

  Copied on ANYWAY - which was stupid - and he says: "Cannot open the application"Firefox"because it is not supported on this system."

  I couldn't find documentation saying my OS has not been supported by firefox 4.0.

  Is there away around this problem?

  Firefox 4 will not work on OS X 10.4, it requires at least OS X 10.5 and an Intel Mac.

  There is an accumulation of third party that runs under OS X 10.4 and Mac PPC, for more details, see http://www.floodgap.com/software/tenfourfox

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)

• ScanDisk will not work after being planned in Vista

  Click on: drive > properties > tab.click Tools check for errors and check the two boxes.to automatically fix the file errors.and to check and recover bad sectors.reboot.no scandisk.just directly in windows.it it rub the simple 3-step windows scan breast... but not the full scan that I'm wanting.this is the only pc I've seen who has this problem , and he always does after a complete restoration of the original image.

  * original title - why the schedualed error checking is not working after reboot, (win ista home premium 64-bit) *.

  Hi magicman77,

  1. you try to perform disk error checking on the drive on which Windows is installed?

  I suggest you to schedule chkdsk /r to reboot following the steps mentioned below and check if it helps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:

  Chkdsk /r

  c. When you are prompted to schedule chkdsk at the next reboot, type 'Y' (without the quotes) and press ENTER.

  d. restart the computer.

  WARNING:
  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Reference link: check your hard drive for errors

  I hope this helps.

• The Explorer will not work after you install Office Jet 4500

  Hello

  Can someone tell me why my windows Explorer does not work after installation of my printer Office Jet 4500 wireless?  I am currently using windows vista.

  Thank you

  Go to a command prompt.

  Type sfc/scannow and allow to run the System File Checker. Restart your PC to see if Windows Explorer works.

• HP250 G3 Notebook: network will not work after the upgrade to Windows 10

  Hello

  Someone was able to get their network works after upgrade to Windows 10 for their portable HP250 G3?

  I think I have a driver problem. The message I get is along the lines of "impossible to link to network protocols. There is also an "unknown" device in Device Manager. Comparison with Windows 7 Device Manager, I can't understand what it could be.

  Of all drivers not not to work, the network is one of the most important that you can not use the Internet to debug the problem. I have uninstall Windows 10 and Windows 7 troubleshooting. (such a pain)

  So far, I tried to download all the drivers of network you're interested in that I can find on the web, as well as the Bluetooth drivers. I reload once 10 Windows installed and hope for the best. They got the right driver for the wireless network (which works only default with Windows 10 I might add) work, but I think it might be a controller driver that is still missing.

  I found a few sites that have suggested to the registry of hacking. I tried that too, but without success.

  If someone hacked into the problem, I would be happy to help.

  Hello

  Thanks for posting your concern, and I would like to try the drivers from the following link---

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6732463&swLangOid=8&swEnvOid=4192

  It didn't help not then write us back with the network card, you can get to the screen of the Device Manager under network adapters, as if from here so we can try searching the drivers from the manufacturer of netwrok card.

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• HP C7280 solutions Center will not work after the upgrade to Windows 7

  I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem.

  I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported operation was attempted" which appears twice, then I get an error that says "an invalid argument has been detected.

  A window pop up gives then a few measures to try to resolve the problem.

  I downloaded and installed the driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which did not work.

  I deleted the printer of the material then uninstalled the Software Solution Center

  Driver package driver re-installed PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 and

  dot4patch_reboot.exe installed,

  Stop the printer, it unplugged for a few minutes, restarted the computer, and

  the same errors.

  The driver is a year old, and I can't find a newer version.

  Exit the:		2009-10-20
  Version:		13.1.0

  The patch is the latest of a few months, but it did not help either. " Print Patch HP software when upgrading from Vista to Windows 7

  2009-12-06, version 1.0, 1.22 M

  This Windows 7 fix corrects some of the features of the printer after upgrading Vista to Windows 7. For networked printers, go to www.hp.com for more support information.

  Any help is appreciated.

  Finally, you have this problem fixed. With the support of HP no.

  I installed the software for a HP Photosmart Premium C410 series and it fixes some problems I had with the HP Solution Center, analyses the problems in the C7280 printing software.

  Go figure...

• HP Photosmart premium c310, Windows 7 (64 bit) series will not work afterit is turned off and then on again

  I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!

  Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.

• Lightroom 6.5 will not work after restoring the windows 10

  First of all, let me say that Adobe support for a pro user product sucks. Really? no other than this support?

  My windows 10 workstation crashed and did a restore. I understand that it is early and I had to reinstall the update 6.5.

  Problem is that Lightroom does not open because he repeats to me there is problem of catalog and will not allow last backup is only a few days to work.

  Then. How to solve this problem?

  The only thing that worked was completely reinstall Lightroom 6, and then apply the latest update.

  After that, I was able to use the last catalog had been saved.

  You guys seriously need better than this forum support if you want to think of yourself as a product for professional use.

  When all else fails reinstall, but this kind of support, it's not what you need.

  Capture One to become a better alternative if you have a serious problem.

• None of my videos will not work after the update to version 13.1

  I tried of you tube and I still get "an error occurred trying to come back later ' player will not mount on my homepage that uses silverlight. The two sectors work with Chrome and IE

  Hey delittle632, this is probably due to the recent update of the plugin to version 11.3 adobe flash. It has caused similar problems for many other users (chrome & IE get provided with a different version of the plugin by adobe).

  You can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.