XPS m1530 wireless connection lost after about 30-40 minutes

Similar Questions

• Wireless connection lost after update

  Last night I downloaded and installed the February Patch Tuesday updates from Microsoft on my WinXP netbook. When I rebooted the computer, wouldn't my wireless connection. My other computer of Windows XP (not yet updated) worked very well. I did a restore of the system on the netbook for just before the updates, and now my Internet is back. No idea of what happened and what I should do next? I would like to install the security updates... Thank you!

  Thanks for the suggestion, Halima. I don't even think to look here so far, as I never received an email informing me that I had a response. What I ended up doing after the restoration of the system is to reinstall two updates at once. And this time everything went well. I still have no idea why I lost my wireless connection, first.

  JO-Anne

• Wireless connection lost after only five minutes

  Hello

  New on site, but you have a very annoying problem, here go us
  I just got a 2nd hand laptop Toshiba Satellite S1800-402 and has decided to add this to my setup wireless at home (big mistake), anyway I have a router wireless 802. 11 b of mentor and my main pc connected to the router and another pc which has a mentor 802 wireless pci card. 11B. Pcmcia card from the laptop is a mentor 802.11 g card is compatiable back, so I was told by bloke in-store pc.

  Just the problem I have is the pc successfully connect to internet the laptop will be fine OK, but 99% of the time I would say 5 minutes max before losing the connection and only way to get the rear connection is either reboot the laptop, or remove the pcmcia card and hope that it detects the wireless again. the wireless network is not secure on it and checked on the router page and there is no filtering or configure... I have Digital wireless home phones that I unplugged and get always the same problem.

  Would be - what this model has received a wireless card already and there is a conflict.

  It becomes a default really annoying that I head in fact.

  Any help would be greatly appreciated no matter what other requried info I will try to help

  Thanks in advance.

  Post edited by: sidog70

  Hello

  As much as I know this model doesn't have a WiFi card and this kind of conflict is not possible. In my opinion connection breaks are caused by software settings or false. If you make a permanent download happens the same thing?

  Try to check the power consumption of your network card WIRELESS and also Idle timeout option in the router.

• The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

  I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

  Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

  Restart all open windows ie11.

  For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

  Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

• Wireless connection drops after 10-20 seconds on Acer Aspire V3-572 - 56T 3 running Windows 8.1

  I have big problems with the network connection Wireless at the office. He sees the network, allows me to enter security credentials, then connects (with connectivity internet confirmed) but gave up after 10-20 seconds. I tried the wireless network to a friend who worked ok without interruption, is certainly nothing wrong with the hardware. I use a brand new Acer Aspire V3 - 572 - T 56, 3 on Windows 8.1, with all the latest drivers/patches loaded and tried to juggle with many advanced settings for the card of network without success. I connected the router to make sure that all the settings, encryption standards, channels etc was corresponding, but the problem is persistent. It has been going on for two days now and is driving me crazy because I really need to work in the office with wifi band. Plug an ethernet cable directly into the router works fine, but it is not the ideal solution (and poses a danger OH & S that he throws on the ground). Can someone help pleeeease!

  FYI, I ran diagnosis several times & the only thing that stands out was the following:

  Diagnostic information (wireless connectivity)
  The Association status: 0 x 00038002 failure
  Association reason code: 0x00000002

  Result of diagnosis: problem found
  Question: RNWF MSM Helper Class
  Root cause: Windows could not connect to "ERICSSON".
  You can try to connect again.

  Result of diagnosis: problem found

  Root cause:
  Failed to bind wireless to "ERICSSON".
  An answer is not from the router or access point.

  Detailed root cause:
  Failed to bind to this network wireless. Windows has not received response from the router or access point wireless.

  Repair option:
  Search for the causes of the low wireless signal quality
  The signal is weak because of the distance or interference.
  Windows Help and Support can provide more information on this problem.

  No need, already has the solution (which worked for me):

  The fix!
  (This is for windows 8.1)

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Right click on the Windows tile in the bottom left of the taskbar.
  -Open Device Manager.
  -Expand "network adapters."
  -Right click on your "Broadcom 802.11n Network Adapter.
  -"Update driver software".
  -"Browse my computer for driver software".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -"Let me pick from a list of drivers for devices on my computer.
  Uncheck "Show compatible hardware".
  -Scroll down on the "Manufacturer" for "Broadcom" Panel and select
  -Scroll down on the "network card:' and find"
  "Broadcom 802.11 Multiband Network adapt."
  -Select, and then click "next".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Say yes to the "put to update driver Warning"
  -Close and you should be able to connect with elegance.

• Wireless connection disappeared after pressing the button system Orange Cisco router WRT54G

  Trying to connect to a printer Dell wirless to the router and has failed, after many tests to get the computer to recognize the printer as a wireless device.  Recommended by Dell to refresh the router and I pressed the button in the above subject line.

  Now, none of my computers display the connection wireless as available. I have reset the time many cable modem and the router and him that restarted the computer and they still will not recognize the wireless connection.

  Also, I tried to use the default IP 192.168.1.1 to review my settings for the router (running a laptop directly via the cable modem), but the address keeps timing.

  What is someone out there knows what can happen to connect wireless to disappear?  Any help is greatly appreciated.  Don

  Your wireless network is gone because you press the WPS button on the front.  Never do this because you don't have the hardware to support it.  Change the SSID and password.

  Press and hold the reset on the back for 30 seconds and then release.  Wait 10 seconds and cycle power to the router.  To connect to a computer wired to the router at 192.168.1.1 only empty password, username "admin".   Now configure the router manually.

• XPS 13 has connection problems after cold reboot

  I have a new Dell XPS 13 (9350) which has been updated with the latest drivers.  The laptop has network Broadcom 1820 A card.  When I cold boot the system I am unable to play YouTube videos, and some Web sites and applications do not load.  If I restart the computer after the cold start, everything works as expected.  This is consistent - it happens every time the system is turned off.

  Please let me know if you have ideas how to resolve this problem so that the laptop connects correctly after be off - thank you very much.

  I just found that by disabling the quick start, the problem is resolved.

• Wireless connection disappeared after update wireless connection device

  Hi, I can't connect to any WiFi recently on my computer laptop so I did a little research on the internet and discovered that keep the device wireless to date is one of the solutions. But after I updated it my laptop have a bigger problem, my wireless connection is totally absent. Until it isn't "manage wireless connections" on the left side of the network and sharing Center , but has now disappeared, my "change adapter setting" to have a WiFi connection , but now also disappear. My laptop is Windows 7 and I have attached a screenshot here for your better understanding. I'm not an expert in computers, so please respond in detail as you can, thank you.

  

  

  

  

  

  Thanks PML and GTS-NJ for your good answer. I solved it by downloading the drivers the website of the manufacturer of my laptop's wireless and re - install all drivers wireless.

• Satellite C660 - WIFI connection lost after disconnecting the AC adapter / CC

  I have a Toshiba Satellite C660/C660D.

  I always connect to the Internet via the wireless connection. However, the laptop must be connected to the power supply. As soon as I unplug the connection drops.

  Any help / advice would be much appeciated.

  Hey Buddy,

  Please read this article. Normally it should help you:
  [Wireless LAN connection disconnects when the AC adapter is removed. | http://APS2.Toshiba-tro.de/KB0/TSB12033H0001R01.htm]

• Wireless network lost after restore

  My daughter has restored its Inspiron E1505 advice of a friend.  Everything what she remembers is one of the keys F pushing in the direction of his friend. I had to reinstall the Windows XP CD and a CD of resources.  The computer cannot find an internet connection.  He had a wireless connection prior to the restoration.  I connected by ethernet to the modem in the modem CD but a window come without installed ethernet card.  I know she used ethernet movement at the College.  I tried to do another restore by using the Ctrl + F11 key and got nothing.  I have minimal experience with computers, any suggestions?

  
  

• Error on blue screen "Unmountable Boot Volume" after about 8-10 minutes after trying to start in laptop with Vista

  Hello

  Have a Toshiba laptop and lately in the face of this problem. After posting the "Loading Windows" screen for about 8-10 minutes, the blue screen appears with the message "Unmountable Boot Volume".  This screen is observed in all safe mode options.  Using the system repair option also gives the same error screen...

  Also, I removed the hard drive and fixed it again. but same problem is observed.  Laptop has only the product recovery CD.   What are the options?   Please suggest...

  Thanks in advance,

  REDA

  try the system restore but restore it back before what is going on has begun

• Connect to a wireless printer lost after installing Microsoft XPS Document Writer

  Microsoft XPS Document Writer was installed on my PC via execution of updates automatically. Now, I have it on my PC and when I need to print any document that I can't find my printer Epson Stylus wireless by default instead I Microsoft XPS Document writer who now appears as my default printer and Microsoft Office Document Image Writer. Cannot find my printer wireless devices & Printers. Frustrating because I can't print any documents. Do I have to reinstall my printer wireless? Please can you help me?

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. what happens when you try to print?
  2. you receive an error message?
  3. What is the brand and model of the printer?

  Method 1:
  You can try the steps in the link and check.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:
  You can temporarily disable the antivirus on the computer and check if you are able to print.
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3:
  You can uninstall and reinstall the wireless printer and check.
  Check out the link and check.
  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

  Just reply with the results. I'd be happy to help you more

• Satellite Pro U400 - network connection lost after suspend

  I have a Toshiba Dynadock. My network is connect directly in dynadock.

  When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.

  What is the problem?
  Dynadock software version is 2.0

  Hello

  I see that you have switched from Vista to XP.

  First of all I recommend you update the BIOS.
  As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.

  You will need to upgrade Win XP to the last State.
  The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.

  Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
  You can find this option in the properties-> tab power management

• Wireless connection lost in mode 'sleep'

  I noticed recently that my Electrify will lose its data and connection Wifi when it is in "standby" quite a long time. I sleep forever set policy and it will show again only 4 bars of cell tower and that's all. After he wake up from his sleep and giving it some time, it will reconnect either 3g or wireless. What I have set wrong it will not keep a connection mode 'sleep'?

  Try the sleep at night...

• Dimension 9200 / XPS 410 Wireless connection?

  Hello, I've tried a search in order to answer to this question, but could not find a search option. In any case, I have a Dell XPS 410. He was a great PC. Year at this same time last burned capacitors on the motherboard and I had to have someone to replace me. During the replacement of the part, I also improved for Windows 7. Now, it's really nice. My question is: since my XPS 410 has not been implemented for wireless and has no wireless card, what are the best options for me to put this PC on a network home in another area of my house? I would use it in my office, away from the cable modem and the wireless router that is running on the network home right now. It's a wireless router Netgear N600 I want to connect with, and wonder; do I need a wireless card installed on the motherboard, or in my quest for answers, I noticed the USB wireless adapters. And I just want to know which would be best for me in terms of distance/reception, etc.

  Suggestions or recommendations would be greatly appreciated.

  Thank you in advance;

  C.Clayton

  simpler is wireless USB adapter