Wireless network lost after restore

Similar Questions

• Wireless connection lost after only five minutes

  Hello

  New on site, but you have a very annoying problem, here go us
  I just got a 2nd hand laptop Toshiba Satellite S1800-402 and has decided to add this to my setup wireless at home (big mistake), anyway I have a router wireless 802. 11 b of mentor and my main pc connected to the router and another pc which has a mentor 802 wireless pci card. 11B. Pcmcia card from the laptop is a mentor 802.11 g card is compatiable back, so I was told by bloke in-store pc.

  Just the problem I have is the pc successfully connect to internet the laptop will be fine OK, but 99% of the time I would say 5 minutes max before losing the connection and only way to get the rear connection is either reboot the laptop, or remove the pcmcia card and hope that it detects the wireless again. the wireless network is not secure on it and checked on the router page and there is no filtering or configure... I have Digital wireless home phones that I unplugged and get always the same problem.

  Would be - what this model has received a wireless card already and there is a conflict.

  It becomes a default really annoying that I head in fact.

  Any help would be greatly appreciated no matter what other requried info I will try to help

  Thanks in advance.

  Post edited by: sidog70

  Hello

  As much as I know this model doesn't have a WiFi card and this kind of conflict is not possible. In my opinion connection breaks are caused by software settings or false. If you make a permanent download happens the same thing?

  Try to check the power consumption of your network card WIRELESS and also Idle timeout option in the router.

• Wireless connection lost after update

  Last night I downloaded and installed the February Patch Tuesday updates from Microsoft on my WinXP netbook. When I rebooted the computer, wouldn't my wireless connection. My other computer of Windows XP (not yet updated) worked very well. I did a restore of the system on the netbook for just before the updates, and now my Internet is back. No idea of what happened and what I should do next? I would like to install the security updates... Thank you!

  Thanks for the suggestion, Halima. I don't even think to look here so far, as I never received an email informing me that I had a response. What I ended up doing after the restoration of the system is to reinstall two updates at once. And this time everything went well. I still have no idea why I lost my wireless connection, first.

  JO-Anne

• XPS m1530 wireless connection lost after about 30-40 minutes

  When you're set on first connection is good, check connect to and Netgear appears with full signal strength. Other networks are also displayed. After that say low sinal strengh of 30 to 40 minutes is displayed wirless connection is lost and Red Cross is displayed.restart and all is well again. My old laptop is fine on the wireless up and running with no problems! I have disabled the firewall but still no problem

  Help thank you

  
  

• Wanted M6-AE151DX: wireless network disconnecting after rest

  I lose my connection Wireless to my home network if my PC is idle for a period of time. I have to disconnect and then back to the network access. No idea what is the cause and how to fix?

  Hello

  Please try the following steps

  b click Start,

  b click on Device Manager,

  (c) develop the network adapters,

  d right clisk wireless adapter and select Properties.

  (e) go to the power management tab.

  (f) uncheck the box "allow the computer to turn off...". »

  (g) click Ok/apply

  Kind regards.

• Connect to a wireless printer lost after installing Microsoft XPS Document Writer

  Microsoft XPS Document Writer was installed on my PC via execution of updates automatically. Now, I have it on my PC and when I need to print any document that I can't find my printer Epson Stylus wireless by default instead I Microsoft XPS Document writer who now appears as my default printer and Microsoft Office Document Image Writer. Cannot find my printer wireless devices & Printers. Frustrating because I can't print any documents. Do I have to reinstall my printer wireless? Please can you help me?

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. what happens when you try to print?
  2. you receive an error message?
  3. What is the brand and model of the printer?

  Method 1:
  You can try the steps in the link and check.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:
  You can temporarily disable the antivirus on the computer and check if you are able to print.
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3:
  You can uninstall and reinstall the wireless printer and check.
  Check out the link and check.
  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

  Just reply with the results. I'd be happy to help you more

• emails lost after restore Windows 10

  I have rolled back to Windows 7 from Windows 10 and are now that I've lost all my emails. I use Windows Live Mail and have my computer set up to delete emails from the server once downloaded to my laptop.  What is painful for me, is that my mails contain 13 years of communication research family history and are therefore invaluable to me. No, stupidly I didn't do a backup or creating a restore point before the removal of Windows 10. 10 downloaded automatically Windows that I turned on my computer and walked away so missed the Palestinian territories occupied in screen of 15 minutes.

  A computer technician would be able to find my emails? I note a restore point was created today on my computer, but not sure if it was automatically created by Microsoft before Windows 10 restore as I was too upset to take note of the time. All my emails were present on Windows 10 but disappeared during the race to return. My last full backup on an external hard drive was in January 2016.

  Please help me.

  Hello

  Thanks for sharing this information on this forum.

  I'm sure this will help others who are facing the same problem.

  I appreciate your help.

• Network lost after restart of host settings

  I have vcenter that works as a virtual machine on host #1 (vsphere 4.1 u1)

  I used vcenter to configure networking on the host #1 and was able to connect to the San and run a virtual machine of the SAN.

  About 10-15 minutes later, I stop the virtual machine of vcenter, put the host in maintenance mode and rebooted the host.

  After startup, the host no longer has network (vswitches, iscsi, config, etc.) settings and as such, cannot see SAN data warehouses.

  I do not understand why this has happened.

  I had already installed 4.1 on my other 2 hosts literally 10 minutes before it happened, and now I have an unpleasant feeling in the pit of my stomach.

  Using ESX or ESXi?

  Because ESXi works in the virtual disk, and it updated the config files not in real time.

  See: http://communities.vmware.com/thread/265019

  André

• Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

  Hello

  This is my setup
  Computer: Satellite Pro 4600 model ps460e 02hyt en
  Operating system: Windows XP SP3
  Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

  My problem:
  The operating system has been improved in win 98se to windows XP SP3.
  The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
  Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

  Please I wait your help

  Thank you

  [email protected]

  I imagine that it will be compatible with SP2 well. You can test it please and post the result?

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• Satellite L750 Wireless wifi off after recovering mode standby

  I put wireless connected automatically in "manage wireless networks", however, after Windows starts, I can see the computer is trying to connect for a few seconds, then a red cross click on top of the wireless icon. I have to press Fn + F8 once (cards Flash showing Wireless WIFI is on) to activate ' on > Off ", and then again to" Off > on ' to connect to your home WIFI network. In addition, the wireless light is always disabled when the wireless network is connected because I could access the Internet.

  And if I don't do the trick to turn off then put on, the diagnosis function network could never solve the problem.

  Can you give me an idea to solve this annoying problem of having to press Fn + F8 several times?

  See you soon

  Andy

  Hello

  In my case the WiFi network is always enabled, if previously I have activated the WLan using FN + F8 option.
  So it s not known to me why you use this combination once more, if the WiFi network has been activated in the first step.

  However, an update of the WLan driver might solve this problem
  Check the latest Wlan driver for your WLan card from this page:
  http://APS2.toshiba-tro.de/WLAN/

• ConfigFree: windows pop up message: sellers application is controlling the wireless network adapter

  Hello

  When I draw a line from nearby wireless networks (with or without WEP security) to the laptop in the middle icon,
  a popup message with the text: the provider application is controlling the wireless card.
  Does anyone know what this message or where I can get the answer to this question?

  After clicking on it you may see far (only the 'ok' button is available), the connecting line with the laptop wireless network disconnects after
  a few seconds.

  Thanks a lot for helping me...

  Hello

  In my opinion this message appears because a 3rd WLan utility configures and controls the WiFi connection!
  There are different possibilities:
  The laptop uses the Intel wireless network adapter and the Intel Proset utility configures the WLan
  Or
  The laptop uses the Atheros WLan card and Atheros Client utility configures the WLan
  Or
  The windows have the option has been enabled and do this job.

  In this case ConfigFree application cannot configure and control the WiFi connection!

• Router E4200, cannot secure the wireless network

  When my E4200 wireless network appears on a discovery list of wireless networks, there a padlock beside him in devices (like my Xbox and iPhone) that who would use to show that it is a wireless network, requiring a password. When I use my Xbox to connect wireless now, he said: "you connect to an unsecured network. Are you sure you want to continue? »

  I used the web portal to select 'Factory Reset' of my router. I also told my iPhone to forget and not automatically connect wireless network. After factory reset, I went to the configuration section of the web page wireless network access router, put a new name for the wireless network, personal WPA2 enabled for 2.4 and 5 GHz networks, developed a completely new password for two I had never used before and then looked for the network on my iPhone. I chose it and it connected right away without asking for a password. Still once, the network does not appear with a padlock next to him in the list of devices to the network from my iPhone WiFi and my XBox says always that this is an unsecured network.

  When using my internet browser to access router, WiFi networks are both classified as WPA2 Personal and each has a password in the password box (and Yes, I recorded the changes - that's what it shows even if I disconnect and then reconnect to the router access.) I tried to remove the power cord for 30 seconds and plug in again and there is no change.

  It's quite a recent change, like maybe the last week or more. I don't know if there was a firmware update or what - my router is configured for auto updates and when I click to check the latest updates, it says that there are no more updates available.

  TL; Dr: said access my router my wireless security is turned on. None of my wireless devices see as secure WiFi networks and each of them can connect without having to type a password.

  Do a reset factory and set up from scratch.

  If this fails, try this:

  Manually download the FW file to the local office of PCs.
  Reset the router, use IE or FF with all security disabled add-ons, load the FW file and let you treat.
  Factory reset the router once more and set up from scratch.

• Cannot connect D110 for wireless network

  Hello

  I just bought the D110 all in one, but am having trouble connecting to my wireless network.

  Here is my network information:

  DSL with Verizon

  My router is a netgear rangemax wnr3500

  I use for my WPA - PSK [TKIP] safety + WPA2-PSK [AES].

  He can see my wireless network, but after that I put in the access code, it does not connect.  I also tried using the WPS method with no luck.  Help!

  I feel so stupid for this but I've checked the settings on my router again last night and the MAC address filtering enabled.  I must have forgotten that I turned it back at some point.  My fault.  Thanks for responding in any case.

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.