Yoga 2 Pro Ethernet via USB hub how?

Similar Questions

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• Can I use Yoga 3 Pro to charge USB devices (phone, Tablet, iPad, etc.) when I'm far from an outlet?

  Is Yoga 3 Pro a giant USB battery pack?

  Yes, the Yoga 3 Pro IS a giant USB battery that can charge USB devices is not plugged into an electrical outlet.

  • How does it work?

  The USB port on the right side of Yoga can be configured to be "Always On". Go to the application settings of Lenovo, and powered on, there is a slider to allow him.

  • The 'Always On' USB port stay on when Yoga 3 Pro is unplugged?

  Yes, he does.

  • Always on USB port:

  

• Drive external hard connected via USB hub: icons not showing on desktop

  Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

  But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

  But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

  (the desktop icon shows normally when connected directly via the USB ports at the rear)

  Thank you.

  Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

  [My personal choice is them having all checked]

• My macbook pro does not detect my s6 (connected via USB). How can I solve this problem

  I tired to connect my phone using the usb cable, macbook pro does not detect my phone as a media device, but the phone is charged. Y at - it a patch or an app, I need for macbook pro to detect my phone.

  Thank you

  If you expect to be recognized in the Finder, note that it is not designed for it. Admittedly, in the Capture of images, Photos or iPhoto if there is no picture on the device.

• I have HP Pro 3120 Mt. - USB keyboard. To access the BIOS. How?

  Hello!

  Keyboard is connected via usb - hub on the monitor... I need to check the cable.

  I'm sorry. Thank you very much.

• External USB hub limit for Satellite Pro C650

  Is there a limit to how much you can connect via the Satellite Pro C650 of external usb ports?

  Provides four ports hub I, ports seem to work individually and all devices operate normally when plugged directly into the top of the Tower, but when all devices are plugged into the hub and combined high tower, there are future errors.

  Thank you
  Karyn

  Well, I think that this should not be a problem if the unique USB hubs provide clean power.
  The fact is that the only USB port provides common 500mA and if several devices would share the power of a USB port then it might be possible that the 500mA available would not be sufficient for all USB devices.

• A powered USB hub will support Ethernet / USB?

  Wifi in my office is uneven, so I need to wire a Macbook Pro (if that's the term). Because the Macbook Pro is not an ethernet port, I get an ethernet cable / USB. I also get a USB hub with an AC adapter.

  I know that you should not the ethernet cable / USB in a hub that is normal because it won't have enough power. But a powered hub will provide enough power for thin ethernet connection? (This laptop gets transported frequently, so I want to minimize the number of items that need to be plugged in every time.)

  Thank you-

  Christine

  I wouldn't use a usb to Ethernet port, I would use the port of Thounderbolt ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

• How do you define a static IP address on an iPad Pro ethernet connection?

  How do you define a static IP address on an iPad Pro ethernet connection?  I use an ethernet USB adapter connected and lightning for USB adapter and it works very well for DHCP connections.  I'm at my lack of something?

  You can't control these things on an iPad, I'm sorry to tell you that.

• Yoga 2 Pro - how to get Windows 8.1 recovery disks

  Hi all.

  I just bought a Yoga 2 Pro and immediately wiped the drive and installed Debian on it (which works very well.)

  While I can't imagine going back me to Windows, it would be useful to have the recovery of Windows 8.1 (or USB) disks available, just in case. (Money-back guarantee, sell to someone, etc.)

  Unfortunately, during the installation of Debian, the recovery partition has been deleted, so I can't create the recovery/USB disks myself. How can I get a copy of the recovery disks?

  Good day and welcome to the community.

  For support of factory image recovery, you will need to contact the Service (info below). There may be a fee for the media.

  Kind regards.

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Country or region	Product	Language	Phone number	Opening hours
  Canada	THINK brand products	English, French	1-800-565-3344	24 hours/day 7 days a week
  	IDEA of brand and B, C, E, G, H, K, N, Q, V, produced the series Y	English	1-877-4-Lenovo (1-877-453-6686)	24 hours/day 7 days a week

• Communication via a USB hub

  I have a pair of FuTek USB210 devices which work perfectly when it is connected directly to the computer, but have significant issues, if I try to plug them into the 10 ports Plugable USB hub.  I have a large number of instruments that I need to connect, and I'm afraid I won't be able to talk to them through the USB hub.  The devices in question come from a number of manufacturers (not all who want to play nice with LabView), but are almost universally using connections series at the exit that I turned to USB somewhere along the line.

  The Center will be a problem?  If so, how can I communicate with other devices via the hub?

  You should not worry.  The pilots were probably written with some DLL that identifies the units, or VISA resource found.  These layers of the Protocol are supported for you and your need not care where the device is connected, only that Windows can detect it (Device Manager is a good starting point)

• OfficeJet Pro 8500 - no USB or Ethernet cable to connect the printer to the computer?

  I'm just trying to set up my new printer Officejet Pro 8500 Wireless.  I got to the step of installing the software, but there seems to be no cable supplied to connect the printer to my computer.

  I can't currently connect via radio that I expect a new wireless router be delivered.  Is this the way onlt connection other than buying a separate USB or Ethernet cable?

  Help, please.

  Ethernet and USB cables are not usually provided with most of the printers that you need to choose a cable with a length of favourabel to you. You can go to a hardware/computer store and buy a USB A-to-B cable. I'll post a picture of the end of cable just to clear any confusion.

  

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• I want to USB Hub with sync Ipad pro please suggest compitable for this device

  I want to buy power USB Hub with Sync to IPad Pro please suggest me the device appropriate for this work

  A powered hub will do, choose one.

• The airport will connect to the brother 2270DW via USB but not ethernet

  Apple replaced my Airport Extreme after only 9 months and it has been quite a challenge to get back to square one.

  On the older airport, I connected to my printer wireless Brother via an Ethernet port on the router, but now it does not detect the printer. I changed the cables without result. I have finally connected via USB to the airport and wireless printing is restored, but why didn't he see my ethernet port.  The port works because I am connected via a cable to my laptop and it lights up. I have a problem with the port or printer?

  He does not see my printer via ethernet. What gives?

  Thank you

  Alexander

  You have entered the system preferences in printers and Scanners and added to the printer?