you find solution Center?

Similar Questions

• Photosmart C410A: HP Solution Center install on 2 PCs for the same printer

  I have two PCs running Windows 7 Professional 64 - bit and a HP Photosmart C410A printer, wireless connections to my network.  The solution Center has worked well on the first PC, it was installed on.  I tried to install it on my new PC, but I get an error on USB hardware and software; It will not attempt to connect and install wireless.

  My question: can you run Solution Center HP of two different PC for the same printer Photosmart C410A?

  Thank you.

  Yes,

  You can install the HP Solution Center software on several computers connected to the same netowrk as your printer.

  Try following these steps to solve the USB error during installation:

  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• Average codes Lenovo B570 - that make these Solution Center?

  I recently downloaded the Solution Center for my Lenovo laptop, B570. It doesn't have the targeted reading test and short SMART self-test. Can someone tell me the problems? (The report was attached as an image.)

  Note of the moderator; deleted photo containg system s/n the Forum rules

  I need to share with you, Lenovo Solution Center is a new software created by Lenovo Think products,

  The mobile PC that you use is product of consumption which is the product of the idea.

  Best regards

  Tanuj

• Receive the error message when you try to activate the solution Center

  I get an error message when I try to activate the Solution Center.  'Error in the file c:\Program Imaging\bin\hpqscloc\1033.xml HP analysis'

  I tried to remove and reinstall the entire software suite several times, but did not uninstall the Solution Center file.

  OfficeJet J6450.  Windows 7, 32 bit.

  Hey R29,.

  Start by downloading the full package of driver from here: HP Officejet full feature and driver software

  If you have recently downloaded this driver package, you may be able to skip this step. If you have problems with the steps below and impossible to find a directory, you must re-download the driver pack and launch the exe.

  1. disconnect the USB from the computer printer.

  2. now, go to start > run > and type folder

  3. search for any record label hp_web_release or 7z

  4 inside of this folder, navigate to the 'util' directory > directory 'ccc '.

  5. in there, run Uninstaller_L1 through L4 in order.

  6. check Add/Remove programs in the control panel for additional HP programs that have not been deleted and delete.

  7 remove the HP or Hewlett-Packard directory in Program Files.

  8 Goto Program Files > common files and remove the HP or Hewlett-Packard directory there as well.

  9. Select start > run and type "temp". inside this folder, delete all the files.

  10. Select start > run and type "%temp%". inside this folder, delete all the files.

  11. now restart and reinstall the driver using the driver from the web.

  Let me know if that solves the problem.

  Thank you!

  Sean

• Photosmart 3310 printer: HP "Solution Center" can't find printer Photosmart 3310 on local network

  Hello

  My printer Photosmart 3310 scanner was working fine, but I recently had to reinstall the HP Solution Center software.

  Now the solution Center can not find my printer on the LAN.

  • I can connect to the printer via its IP address and see all the information about the printer and scan
  • Printing and scanning doctor can find the printer
  • Windows can see the printer and print

  But the HP Solution Center can not find the printer to install it, even when I type the IP address of the printer in the 'wired network' installation part of the Setup program.

  I used the latest version of the HP Photosmart and Officejet full feature software and drivers (August 2015).

  I don't know what else to do to try to get the HP Solution Center to find my pronter, I disabled the firewall, I tried to connect wireless and USB, but nothing seems to get the solution center to recognize my printer.

  Any suggestions?

  Concerning

  Hello

  Published on the website of HP software seem to be evil and not one used for your printer.

  I have notified HP to get this fixed number

  Run the installation once more and select uninstall to remove it from your PC, then restart your PC.

  Finally download and install the following software, it's good:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  See you soon,.

  Shlomi

• I can't find the solution Center now, I moved to a Mac

  I have a C109a printer Fax and have recently implemented with a Mac. I can't find the center of HPSolution, so I assume that it has not been installed, which means that I can't clean the heads or do no matter what maintenance.  I use Mac OS X Lion 10.7.5.  Someone out there you have ideas?

  Roger

  You will not find the solution on the Mac HP Center. You information will be under the HP UTILITY. Hope that helps.

• When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  original title: Solution Center?

  I think that the solution center is a part of HP.  I go to programs - run and type msconfig.  Click the Startup tab and look for Solution Center, then uncheck the box so that it will not start then click on apply and restart the computer

  Or
  You can put in the HP printer drive and re install the printer that can also work.  Hope this helps

• I had a request on Windows Live Solution center and request still pending, cannot not find post or even open window Live Solution gives error!

  request lost post on window for e-mail folder

  I post a request on Windows Live Solution center about 27 July give my email name - and request still pending, not found or even open window Live Solution gives error!

  the application in question was: when I put in order my window live folders mail had become unstable, I remove a double folder which appear empty, I moved subfolder of a folder and subfoulders lost.

  I've lost Business-Optus DSL-city of Luigi Swan - Bank - various - Computer.They contain information that was not save on my important document

  My request was if possible to recover them. Happened this week is so cool to be given there.

  Thank you

  Luigi

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=10

• I get this message "the function ar you, try to use is on a CD-ROM or other removable disk that is not available." Insert the floppy disk "solution Center".

  I can't seem to find a "Solution Center" marked drive & I'm not sure what to do.  Can anyone help?

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support.

  http://h30434.www3.HP.com/

  Contact HP or ask their Support Forums.

  This is a problem with their software.

  See you soon. Mick Murphy - Microsoft partner

• HP Solution Center can't find the printer.

  I have a C280 and Windows Vista. I worked OK. for years. Now the HP Solution Center would not find the printer. I tried to reinstall the printer, but the problem doesn't go away. I reinstalled Windows Vista and the printer does not have a solution. To reinstall the printer, I used the cd that came with the printer and I also downloaded the drivers for HP Web site.

  I can print and make copies, but I can't get a file after scanning a document or a picture.

  I'd appreciate any help.

  You can try a reinstall of the software HP Solution itself, rather than just the printer drivers.

  You can find a guide for it here:
  http://support.HP.com/us-en/document/c02259020

  You can download the latest version of the complete software of features here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=3204464#n191

• Find the HP Solution Center

  I have just connected my Photosmart C4180 old in my computer brand new that is currently running windows 8.  The driver has been downloaded automatically and my printer works fine, but I used to have access to the Solution Center that I used for scanning, etc.. I can't find anywhere and have sought downloads without success. Can anyone help please?

  Hello

  Thank you for reporting the issue. It looks like your son, in is not installed by the complete software, that allows to install the hp scan application.

  1. you try to install the latest version of download of the installation wizard.

  http://ftp.HP.com/pub/softlib/software12/COL50403/MP-122330-1/hppiw.exe

  Good impression

  2 or HP released a new cool application for scanning on Windows 8.  If you have a copy of WIndows 8, you can download HP Scan capture on the Microsoft Store or by clicking this link:

  http://apps.Microsoft.com/webpdp/en-us/app/HP-scan-and-capture/94fffdd0-bb3b-4adc-96CA-24c1d79e16c6

  Good impression

• No Solution center after you download the driver for HP Photosmart D110

  My friend has a Touchsmart 300 PC running Windows 7 64 bit. I downloaded and installed the driver and the latest software, or so I thought. I downloaded the D110a driver and software. There was also a D110b but I do not know the difference. The printer worked very well for its network, but there is no Solution Center or additional software installed. I uninstalled and reinstalled several times without success. I also got "Fatal Error". When you try to open the solution Center, there is a message box with different solutions on how to fix: did not complete installation, use the CD (we tried), or go to "Configuration files" on the computer other options. Nothing has worked. Should I have downloaded the D110b driver and software?

  I appreciate your help.

  Erna

  Erna - I'm at a loss and you are probably right, go to the register to search only the HP files dealing with the printer on an HP machine would probably be very long and delicate.  I had a Sony so I have them cleared out by searching "HP" and then looking at each register who came and delete those I knew come from HP software.

  To Sherwindu - yours sounds like an installation problem that might be able to be erased by a full unistall and reinstall from the website not a CD Rom  In addition, during the installation make sure you have a strong internet connection.  I know that I have DSL (and a small DSL to this) who gets interrupted all the time and had difficulty to install the HP software because of that with many tries sometimes to do things.

  Each of you - material is generally NOT a problem of HP, which means that in general, their hardware devices are made robust enough.  My experience and my knowledge of HP and its service which is their software to run their devices is usually wrong and their organization so large with so many products that their technical departments are overwhelmed and just giving the standard corrections.  You have both found not a good internet connection without own interruption during installation, or the software is not properly written (I know that their Vista drivers weren't properly writings/facts for my HP machine, but that's another story).

  Good luck to you two.

• Why the HP Solution Center will not find the printer and then closing?

  I reinstalled the HP Solution Center Suite software for my Officejet Pro L7590 (all-in-one) on my wife's computer and was able to print but the solution center not working anymore.  Then, I connected the printer to the network and the driver/software installed on my computer.  I am able to print as well, but when I open the Solution Center it says "Products HP undetected" and then closes.  I have Windows XP Pro on two computers and before that I did a reinstall of the software on my wife's computer, everything worked well.  Where should I go from here?

  Thanks for the Document of all possible solutions.  What I found was the "Digital Imaging Monitor" wasn't not and by going to the directory C:\Program Files\HP\Document Imaging\Bin and find the run file hpqtra08.exe, clicking on that and pressing the key ENTRY, the digital imaging monitor started and the icon popped up in the projection of bar good lower program that it is running.  Once who was running, I was able to open the HP Solution Center to my scanner, etc.

  The only problem I had was when I restarted my computer, the Document Imaging Monitor does not open and the icon show up in the lower right of the bar program.  So this time I went in the directory C:\Program HP Imaging\Bin, click once on the file hpqtra08.exe , then created and right click a shortcut icon on my desktop for this run.  Now, whenever I need to use the HP Solution Center I double-click on the icon that I created that starts the digital imaging monitor and then I am able to open the HP Solution Center.

  Of course, there is a defect in the installation but I reinstalled the program 3 times without success so I'll stick with manually from the digital imaging monitor, because I know it works.

• 8500 a909n all-in-one: could not find a way to install the HP Solution Center after upgrade to win 10

  Grateful for help in finding a way to install the HP Solution Center after upgrade win10.  The installation CD original will not auto-run and when seteup.exe forced to run from the DVD, offers 'output' as the only item on the menu.  The HP support web site offers only the "HP Print and Scan Doctor for Windows" I have installed and tried to run several times.  Pretty frustrating.  Prints OK from normal applications, but am really struggling to analyze.  Any help appreciated.

  I have a 8610 who worked during the first weeks perfectly under windows 8.1.

  After the Win 10 update, it does not work.  The installer who "sees" the printer on the wireless network, impossible to install drivers or programs.

  Hate to say it, but I think we're out of luck until HP fixed their software.

  Very ironic because they don't have that tell of these printers are compatible with Windows 10 messages.  Technically, that's true; It is their software that isn't.

• Cannot find an installation package for Solution Center

  When I start my computer, a box comes on the screen saying: Solution Center please wait while windows configures Solution Center.        (On the bottom of the box there)    Cancel
     
  Then another box comes in addition to the one that says the Solution Center OK and cancel (in the upper right corner) the component you are trying to use is on a CD-Rom or another removable disk that is not available.
  Insert the disk Center of Solution and clk OK (at the bottom of this box is a box saying - use source - and another nest box to it with - browse - in.)

  When I click on cancel another box appears.      It said Solution Center X (top right) (there is a small warning sign, then an installation package for the productSolution Center is not found. Try the installation again using a valid copy of the installation package "Solution Center.msi."     OK (bottom)

  I have very good clk and then cancel to get it off my screen.    Is there a place I can get this Package of Solution or a way to keep these boxes appear each time I turn on my computer?

  So the Solution Center probably has to do with your HP printer. I believe that you need it to use all the features of the printer. that is, scanning the computer. Knowing that you have an HP printer let me do a Google search. This is one of the links to the forums of HP that describes a fix (scroll down to the second position of Douglas Leshures):

  http://forums13.itrc.HP.com/service/forums/bizsupport/QuestionAnswer.do?admit=109447627+1239667320346+28353475&ThreadId=1201005

  If you want to see other related links, I used this search term to my search on Google:

  "Center of solutions HP please wait while Windows configures Solution Center"

  If you feel uncomfortable a lot of computer work - and it's perfectly OK to admit it, because we have all our areas of expertise - have a competent local computer tech, come on up. I do not recommend using a type BigComputerStore/GeekSquad of the place. MS - MVP - Elephant Boy computers - don't panic!