HP Solution Center can't find the printer.

Similar Questions

• Why the HP Solution Center will not find the printer and then closing?

  I reinstalled the HP Solution Center Suite software for my Officejet Pro L7590 (all-in-one) on my wife's computer and was able to print but the solution center not working anymore.  Then, I connected the printer to the network and the driver/software installed on my computer.  I am able to print as well, but when I open the Solution Center it says "Products HP undetected" and then closes.  I have Windows XP Pro on two computers and before that I did a reinstall of the software on my wife's computer, everything worked well.  Where should I go from here?

  Thanks for the Document of all possible solutions.  What I found was the "Digital Imaging Monitor" wasn't not and by going to the directory C:\Program Files\HP\Document Imaging\Bin and find the run file hpqtra08.exe, clicking on that and pressing the key ENTRY, the digital imaging monitor started and the icon popped up in the projection of bar good lower program that it is running.  Once who was running, I was able to open the HP Solution Center to my scanner, etc.

  The only problem I had was when I restarted my computer, the Document Imaging Monitor does not open and the icon show up in the lower right of the bar program.  So this time I went in the directory C:\Program HP Imaging\Bin, click once on the file hpqtra08.exe , then created and right click a shortcut icon on my desktop for this run.  Now, whenever I need to use the HP Solution Center I double-click on the icon that I created that starts the digital imaging monitor and then I am able to open the HP Solution Center.

  Of course, there is a defect in the installation but I reinstalled the program 3 times without success so I'll stick with manually from the digital imaging monitor, because I know it works.

• Photosmart 3310 printer: HP "Solution Center" can't find printer Photosmart 3310 on local network

  Hello

  My printer Photosmart 3310 scanner was working fine, but I recently had to reinstall the HP Solution Center software.

  Now the solution Center can not find my printer on the LAN.

  • I can connect to the printer via its IP address and see all the information about the printer and scan
  • Printing and scanning doctor can find the printer
  • Windows can see the printer and print

  But the HP Solution Center can not find the printer to install it, even when I type the IP address of the printer in the 'wired network' installation part of the Setup program.

  I used the latest version of the HP Photosmart and Officejet full feature software and drivers (August 2015).

  I don't know what else to do to try to get the HP Solution Center to find my pronter, I disabled the firewall, I tried to connect wireless and USB, but nothing seems to get the solution center to recognize my printer.

  Any suggestions?

  Concerning

  Hello

  Published on the website of HP software seem to be evil and not one used for your printer.

  I have notified HP to get this fixed number

  Run the installation once more and select uninstall to remove it from your PC, then restart your PC.

  Finally download and install the following software, it's good:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  See you soon,.

  Shlomi

• Hello help, Mac can't find the printer

  Hi all

  'BonjourPSsetup.exe not supported under OS X' I am puzzled.

  To create a roaming network, I added as an express to my Time Capsule airport and doing so changed the name of the network. (Original name was a little too identifiable) now MacBook WiFi can not find the printer, it allows.  (cause he's probably looking for the former name of network). Went to Apple's support for assistance. Found several posts with instructions. All direct me to download the Printer Wizard Hello.  When I do, I get the above error.

  Also, went to:

  Applications - printers and Scanners - add

  List of shows:

  Name: Series HP Photosmart C4385

  Type: USB

  Cannot change the type of USB to Hello

  SYSTEM-

  El Capitan 10.11.6

  MacBookPro, MacMini, iPad.

  Express connected to the Airport via CAT 6.

  MacMini use USB for printer

  HP Photosmart C4385

  Thanks in advance,

  Mike

  Resolved to my situation. Find the HP original installation disk. Uninstalled and reloaded. Fact

• I can't find the printer driver for my printer to savin C9020 wsd

  I can't find the printer driver for my printer to savin C9020 wsd, anyone know where I can get it?

  Hello

  What operating system do you use?

  I suggest you to check if it is compatible with the operating system you are using.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I suggest to the manufacture of the printer and check.

  http://www.Savin.com/downloads/default.aspx?HBN=drivers

  See also:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• I can't find the printer ip address

  I can't find my printer address id, I printed confg. page and doesn't not found ip address, so I can't get the code for my printer, my printer is M127fn, I looked on questions and support for hp, I tried everything, but I can't find the ip address of my printer. HEEELP. !

  This means that the printer have no addigned IP address.

  Make sure that the ethernet cable is properly connected to the printer and the router, like trying to pass to another router's LAN port.

  Allow it a minute and check again, if the persistence even try another ethernet cable and check for the difference.

  Shlomi

• Printers with/without wire: "printer not found," "Can't find the printer," 'no devices found' (Windows 10)

  If you receive one of the following error messages, and your printer is connected to your computer via a wired or wireless network, see the troubleshooting steps in the following doc: printer not found during Network Driver Setup (Windows).

  • Printer not found
  • Cannot find the printer
  • No devices found
  • Your printer is not found on your wireless network

  The solutions include:

  Step 1: Restart the computer, printer and router

  Step 2: Check the status of network and printer connection

  Step 3: Manually connect the printer to your network (only for wireless connections)

  Step 4: Run the HP Print and Scan Doctor

  Step 5: Temporarily disable the firewall on the computer software

• Install HP can't find the printer on the airport

  I recently bought a HP Photosmart C410a and it printing, fax and copy all work fine without installing any software on any of my macs. I run OS x 10.6.  However, when you try to scan from the printer, it is said to start the scan of the computer. So I tried to install the software (downloaded from the HP Web site) and the HP installer can't find my printer.  The printer is connected via USB to the airport and as I said printing and everything works fine.

  How can I install HP to recognize my printer? Or, if not, is there a program already on my mac which will accept the scans?

  Thank you.

  Oh, USB ports on airports (or indeed any other router) does not scan support.

  Connect your wireless printer, not USB.  Unplug the USB cable and then on the printer: Setup > network > Wireless Setup Wizard.

  Then, reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• scanner can not find the printer hp photosmart 6510 e all-in-one

  I tried all the help and downloads to try that works - I don't have the disk.  Somehow my printer has been removed and I got to the top but the scanner will not recognize the printer and will not scan.  He says that it cannot find the printer.  I tried to download all the drivers etc from windows, hp Web site.  He says, make sure that it is connected to my computer?  If the printer is connected wireless why my scanner isn't?

  There is only one download of the complete software unique features on the HP support page, if you had installed, it would have placed a shortcut to an HP printer on your desktop, and from there you can access the diagnostics or assistance

• Solution Center said problem as the printer is disabled

  Since the upgrade to 8.1 Windows solution Center says that my printer is disabled. This isn't the case, that my printer is enabled and works well. I deleted and reinstalled the printer drivers and also Center solutions lenovo, but he always tells me that I have a problem with the printer is disabled. Device Manager tells me he is correctly installed and activated. How can I get this message from the solution center off?

  Thanks for your reply Peter. I did as you suggested and off the notification, regards Steve

• DeskJet 1050 All - in - One J410: update to W - 10. Can'f find the printer CD. All of this. Help, please.

  After the upgrade of Windows 10, I need to set up my HP printer so work functions.  I've looked everywhere but can't find my CD for my Deskjet 1050 all-in-One J410 series printer.  I have everything, including my FedEx slip sent to me with my current address.  I have the serial and FPU n # also and will give this info if necessary.  I just want my printer works properly.  Is there anyway that I can do it without my CD?  To use an old term of chess, I'm just a 'wood' push, but you people are masters and experts, so can someone there help me, please?

  Hello

  Kindly click on the following link to install the driver.

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-1050-all-in-one-printer-series---J410/4027462/model/4027464#Z7_3054ICK0KGTE30AQO5O3KA30R1

  I work for HP.

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.

  Please indicate the position that solved your problem as "acceptable Solution".

• Where can I find the print files

  Hello fellow Mac'ers

  I sent a file from a PC to my Macbook using Hello. I do not see the files in the print queue or anywhere else, but now I get pages virgins churning of my laser printer.

  I can't print from the Mac in the form of files what if producing blank pages prevents all other files sent to the printer
  If I can find where the print files are sent, I hope that, by removing the file/s, the problem can be solved.

  I restarted the printer, the Mac and the PC and also deleted Hello.

  Hoping someone can shed some light on this problem

  Open Safari and type the following URL

  631 / jobs /.

  You should see the work queued here. If that does not work either and you don't have that one printer the fastest way is to reset the printing system

• HP Photosmart C410 PC can't find the printer wireless

  I have my printer wireless for a year and all of a sudden it stopped working.  The printer says that the network connection is good without error.  But the PC does not see it and says that it is offline.  I restarted the printer.  Restarted the pc.  Connect the printer cable and it works fine.  Reset the wireless upward.  When I unplug the cable from the printer, even once the pc can't find it.  I've looked everywhere and can't find how to solve this problem.

  My pc is running windows 7.

  I finally solve the problem by removing the printer from the computer and uninstall all related software and put it back, from scratch.  This seems to have solved the problem.

• Where can I find the Print Screen or tool captures Windows XP?

  I'm in an online class.  The subpoena calls for us to use the Print Screen or tool captures Windows 7.  My computer is Windows XP.  Where can I find these tools in Windows XP?

  XP is not a cutting tool. You will need to use the print screen button with MS Paint which is a real PITA bread. I suggest you download one of these freeware tools and make life more simple.
   
  PrintKey 2000 free
  http://www.Sharewarejunkies.com/00zwd2/printkey2000.htm
   
  Gadwin PrintScreen
  http://www.Tucows.com/preview/419481
   
  PicPick
  http://PicPick.en.softonic.com/
   
   

• Solution Center does not recognize the printer

  The printer is a HP C7180.  Operating system is Windows 7 (64-bit).

  Solution Center says that printer is offline - but it is connected & running.

  What to do?

  Uninstall the HP Solution Center.  Install the latest version of the appropriate operating system available on your printer's web support portal.