You see does not separate records

Similar Questions

• Expansion vDisks in HP CommandView & ESX you see does not change

  Hi all

  Recently added records and developed a vDisk Optional HP (HP P6300 EVA), but the other storage does not appear in the client vSphere for use.
  Am I missing something here?
  Any input would be greatly appreciated.
  Kind regards
  Nash

  Welcome to the community,

  after resizing the vDisk in CommandView (and in the meantime for him at the end of the expansion), rescan the vmhba in "Configuration"-> "Storage adapters" on your ESXi hosts and then open the properties of the data (on the ESXi server) store and increase/develop its site (i.e. extend VMFS partition).

  André

• You see does not license under Administration - Home option

  It is part 2 of my first thread where I asked how to apply the temporary license for 60 days of ESXi.  I have registered and the license key.  A few people sent me the link on how, but I don't see the option to license being mentioned in this guide.  I pulled to the top of my vSphere client, connected to ESXi.  You click home under the Administration section, the only icon I see is roles and system logs

  You need to use the method in the link that has been validated license "standalone", not the vCenter one basis:

  To allow a standalone ESX or ESXi 4.x (vSphere Hypervisor):

  1. Connect to the ESX/ESXi host with vSphere Client.
  2. Click the Configuration tab.
  3. Click licensedfeatures of software.
  4. Click change in the appearance under the license tab.
  5. Select assign a new license key at this host.
  6. Press enter and enter the license key.
  7. Click OK.

• Is 3.1EA2 - possible to import reports more?  You see does not Import/Export

  In previous versions, I was always able to exploit the Export/Import features that are available when right-clicking on the user-defined reports. Just try to 3.1EA2 & I'm seeing is more Import/Export menu options when right-clicking. Something I'm missing? Thank you!

  Hello Larry,.

  It should no longer be the naming of options
  You have a "Save as" and "Open carry"?

  Concerning
  Marcus

  I think that export and import more clear what is meant by the options.

  Published by: Marwim on 22.11.2011 08:25

• New computer, need to reinstall. You see does not Cloud uninstall.

  I have uninstall Acrobat Pro, so I could reinstall on a newly purchased Mac, but the cloud it shows even as installed so I can't download it again. All other apps worked fine. How can I download it?

  Got a chat with Adobe tech support and they sent me a link to download the program. Don't know why the cloud did not recognize my uninstall. But he has now corrected thanks.

• I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I think same as Adobe Acrobat

  I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I even think that Adobe Acrobat Pro DC has limits. There is no way to set what points in columns to force the column break? Or create several columns that are unnecessary? How column in Excel, size fixed when import us text and define where breaks have columns of text?

  Google Tradutor para empresas:Google para appsTradutor sitesGlobal market Finder traducao Toolkit

  Acts traducao Instantaneasobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar comments

  PDF does not contain columns, lines, formats, styles or other aspects of word processing or spreadsheet file formats.

  This is because the PDF is decidedly not a file format of word processor or a spreadsheet or something 'like' one of these.

  (see ISO 32000 for what PDF "is")

  Which allows to optimize the export of the content of a page PDF is to start with that tag well formed PDF (ISO 14289-1, PDF/UA-1).

  Without that export is what it is and we performs the cleanup of any necessary content using the native application for the export of files (MS Word or Excel).

  Be well...

• Satellite L350-262 - you see only not WiFi

  Satellite L350-262, you see only not the wireless networks in any place. Can get access to the Internet via LAN. Has suddenly stopped working. Suggestions gratefully received

  Thank you
  Nick

  Can any of you provide the most relevant information?
  Wireless network card is listed in the Device Manager?
  Wireless network card is installed correctly it?
  Can you turn on/off wireless card using the FN + F8 key combination?

  Have you tried to do something to fix this? If so what exactly?

  Hey guys how to discuss something like this if your description of the problem is one sentence only.

• "The cover image you selected does not fit this folio." - but should be.

  I get the error message.

  "An error occurred during the loading of an image. The cover image you selected does not fit this folio. There must be no more to 1024px in height and width 768px. »

  Jpg files horizontal and vertical I'm trying to download for coverage are exactly the 1024 x 768 and vice versa. I have tred exporting to different presets and resoluitions and Folio Builder still will not accept them.

  I know I ran this problem before and I have searched for it in this forum thinking it would have been displayed in all but impossible to find aynthing - sorry if I'm double posting.

  I think I realized my problem... I got 96 DPI selected, when it should have been 72. stupid.

• The IPTC metadata does not picture record

  A photo agency has agreed to distribute my images. They need title and the caption of each image, in any of the IPTC. I entered the title metadata and caption on the metadata on the right side column, but it does not appear on the exported image. I sent a number of test images to the Agency, and they can see the images, but not the metadata.

  I checked - the catalog settings - edit automatically write changes to xmp, but still no luck. I've updated to the latest version of LR CC. See image showing the captured metadata, but that does not record on the image.   What I am doing wrong?

  

  Which option you have chosen in the dialog box export as metadata - include?

  You will need to use all the metadata, either all but thought camera camera & info.

• Satellite A100-62 of the bios, you see only not 4GiG ram?

  Hello

  So before I bought and placed 4GiG ram in my satellite I looked on the site of toshiba connected and so on... found my cell phone and I noticed Max ram is 4096 M, great, I thought, off I went and got 4GiG ram and installed 2 giga both to make sure that the ram is not defective "", then when the two sticks has been tested and bios and windows that I have placed both at the same time that windows has "known issue" you see don't not 4GiG ram which is OK by me, I guess, but then I noticed that the bios of the laptop sees 3063 Mb which is * very strang me! *

  When I called toshiba, they said yes, you'll still 4GiG of RAM, but what confused me is if I installed then bios should also show the fact that theres 4gig 4gig?

  can anyone tell me please what continues

  Thank you

  Hello

  already checked the discussions here in the forum? I mean, West search and there are MANY threads on your problem. Please check the forum and you will get your answer.

  Short description of your problem: bios does not display correctly the amount of RAM that is installed on your system, but the RAM is perfectly usable BY THE SYSTEM, but NOT by the operating system.

  Please visit the following link to learn more about the problem of VISTA and XP 4 GIG-> http://www.brianmadden.com/content/article/The-4GB-Windows-Memory-Limit-What-does-it-really-mean-

  See you soon

• Time Machine, you see only not the ssd internal

  Today, I had my old OWC replaced for a bigger Samsung 850 EVO SSD SSD internal flash drive.

  I named the new SSD, the same as the old.

  The new SSD is the boot disk and it works without problems.

  But now I see that Time Machine does not see this new SSD (he did see and save the old).

  This rather new Samsung SSD is not supported by Time Machine and therefore not show under the volumes available?

  I already tried the following Terminal command:

  : write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1

  But no success with that and in my case it is an interior volume, perhaps the command is wrong then?

  Or am I mistaking here and are the Time Machine preferences "Select disk" only discs showing where you can save to and not FROM (in the 'Options' section, you can exclude certain things and it shows the disc)?

• Windows XP, you see only not all files in Windows 7 shares

  I see an embarrassing problem that occur on two different sets of machines on different networks.  The initial symptom that led me to study was that software synchronization third laptop XP Pro SP3 computer a user has acted improperly, saying that some files in directories on a Windows 7 Ultimate 32 bit computer were gone, but they really were.

  I traced the problem in several directories on the Windows 7 machine display incomplete content seen on the XP machine network.

  For purposes of explanation, //Desktop/Folder is a share on the Windows 7 computer, which has 167 files it contains.  If you open this share on a networked XP Pro computer, it shows only 140 files.

  For example, File1.doc and File2.doc are both in this shared directory on the Windows 7 computer.  However, on the XP machine, File1 does not appear in the directory.

  On the Windows 7 machine, File1.doc and File2.doc are identical regarding permissions and attributes.  The only differences are the size and creation date.  Look at the rest of the 27 "missing" files in this folder, the results are the same - I see no difference.  The files are not password-protected.

  I have reproduced this exact behavior with the same data on different machines with the same operating systems.  All machines are completely up to date with respect to updates.  There is no detected malware on any of them.  They are on the same workgroup.

  This change in behavior has happened apparently quite recently that the user had no problem with the synchronization software for laptop until last week.

  Can anyone suggest what could happen here?

  Thanks for your reply, Jonathan.

  I traced the problem to Avast (any flavor).  It turns out that it's a known problem, but not a single notice of too many people.  It is really so when you try to run the software of synchronization between two networked computers and directories that you synchronize are affected by the bug of Avast as the synchronization software performs a very detailed comparison.

  When I uninstalled Avast on the source (Windows 7) XP machine could see all the files in all the network shares.  When I reinstalled Avast, the problem returns.

  I have a ticket in Avast on this problem.

• Virtual PC 7, you see only not "Windows XP Home Edition' computer master file

  Hi, VitualPC for Mac Version 7 with Windows XP Home Edition now does not see my main "Windows XP Home Edition' computer file, and when I open the VPC now it asks me if I want 1. Install your own operating system, 2. Installation of Virtual PC for Mac CD, 3. Import from a previous version. Here are a few screenshots. http://home.earthlink.NET/~RV-Jeff/VPC1.jpg.. .it just won't let me not specify the file "Windows XP Home Edition" computer than the file to use/boot from! How can I fix it?

  Jeff

  Is PS why so difficult to find help on Microsofts website? Or FIND the so-called "forums"? I had to get help online chat able to find this page. And this is the strangest looking for 'forums' I've ever seen...

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads  You might have a better chance to find an answer here. I replied because you had no response. I ran Virtual PC and VMware for about 6 months and all sorts of problems installing operating systems. I just wanted to try something new, but he took too much of my time. I went back to the Flash Animation and videos. I hope you find the answer. Good luck to you.

• E3000 you see is not a WD MyBook for Mac 2 TB external hard drive

  Just bought a router from LinkSys e3000 and WD My Book for Mac (+ WD Smartware) in order to save my two MacBook Pro wireless.  The router works FINE for all other wireless and routing functions.

  Bottom line, the LinkSys Router cannot access external drive USB, the same scores if he can 'see' the reader. (By clicking 'claim' does nothing)

  This would have something to do with the functionality of ITS and drivers needed - since I can't add the drivers to the router.

  (1) valid router works by plugging an another WD MyBook essential 1 TB drive (PC version) and the routers sees several partitions.

  (2) worked with support technical LinkSys to check the router works with the journaled Mac partitions and the router worked as expected

  (3) added a FAT on my book Mac volume - still does not work with the router

  (4) plugged my book Mac directly on the MacBook Pro - works fine (actually a backup from two Mac Book Pro both 1 via USB direct connect)

  (5) off VCD - no luck on the router

  Can anyone provide a suggestion before I return this drive to WD?  I'm at my wits end.

  In addition, other that this problem with WD, I can highly recommend the LinkSys e3000.  Seriously HOT router with a huge flow.

  Yes... it's that I'm just understand! : smileymad:

  Please ask PD to put this future firmware support on the list for improvements.  I love the router, but really miss you a market of large target with this omission.

  It is closed for me.   Thank you!

  SDM

• BlackBerry 10 Z10 you see is not the Bluetooth connections

  I have a Bose Bluetooth speaker that my new phone does not see. I had an another Z10 the first week, they came out (returned with a screen issue) who connected without effort to the speaker. Last week I got the new phone and one for my wife and neither phone recognizes or sees the device. Is this a bug, there are fixed, please help

  Hey Coffee399,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  Is the speaker Bluetooth in pairing mode when you try to connect to it?  Also have you tried connect any Bluetooth device to the Z10 BlackBerry?

  I look forward to your reply.

  See you soon.