you will need to save the files to a new PC.

Similar Questions

• I can't update my CS5 because I loaded Yosemite on my iMac. you will need to update the files camera raw.

  I can't update my CS5 because I loaded Yosemite on my iMac.  You will need to update the raw files.

  Please try and reinstall CS5: stalling-yosemite-version-10-10-on-imac http://feedback.photoshop.com/photoshop_family/topics/problems-with-photoshop-cs5-after-in it seems that the update of the OS is corrupt PS CS5 if it was installed before the upgrade to Yosemite. Let me know if that will fix it for you.

  With the permission of Jeffrey Tranberry

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  tried in SOUND > Speakers > CONFIGURE it on by clicking on the right left speaker sound time and vice versa.

  Hey DiegoWO,

  There is not currently an option within the OS to achieve.
  However, your drivers audio pourrait have a built-in effect that allows you to reverse the stereo sound. If you do not see a separate application to manage your sound, you will need to visit the website of the manufacturer of your sound card and install the latest drivers.

• You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

• You are prompted to save the file when opening it

  Here is a new... I am trying to open a file and adobe asks me to save changes... when it is not still open!
  
  File does not open, and it is now corrupted.

  After searching solution... found this in the forum and now it allows me to open the file without saving it quickly... and I can see all the slides.

  Finally, I found that my user settings file was corrupted. I was able to overcome by following these steps.

  NOTE: You will lose your preferences - so make a note of them before to do. In addition, you will need to make sure you can see hidden files.

  1. close all instances of Captivate.
  2. check in the Task Manager to make sure that no Captivate.exe process is still running.
  3. navigate to C:\Documents and Settings\YourUserName\Application Data\Macromedia\Captivate
  4. rename the captivate_v10.dat in captivate_v10.dat.old
  5 restart Captivate (this will create a new dat file)

• You will need to disable the first 10 items?

  I have a new laptop and downloaded my first items 10 and Photoshop. However, I got a message when I opened the first telling me that I needed to disable it on another computer. But I can't figure out how to turn off!

  In addition, I don't know if it's connected with my need to turn off or if it's just the computer, but I can't use one of the links in the menu to create on the old laptop, and I can't connect to my Adobe ID on either.

  Can someone help me?

  PS: If it's important, all of my new laptop runs on Windows 8 and the old man is 7.

  TsukiNaito1

  Adobe permits you to use your first items purchased 10 on only 2 of your computers serial number. If you want to put this on a 3rd computer serial number you will need to 'Disable' installation on PC 1 or 2 to get this serial number of first Elements 10 purchased on computer 3.

  The message you get on computer 3, you are saying that your first 10 items is on more than 2 of your computers already (computer 1 and 2) and you want to install it on another (the 3rd computer).

  So, where you have first Elements 10 installed?

  Go to one of these first Elements 10 computer configurations. Open first items 10 to its workspace. Go to help Menu/disable and click on disable for this. Close to there. At this point, you can

  a. leave the program installed but disabled on computer 1 or 2 as the case

  or

  b. Uninstall computer 1 or 2 as the case mya.

  Please see the newsletter and let us know if the above is clear and works for you.

  Thank you.

  RTA

• you will need to determine the end of the video.

  I need to know how when I arrived at the end of the video.  I seem to remember there is a new Flash 10 command that will allow you to know without having to track the total number of bytes used or time elapsed or anything complicated like that.  Does anyone know the command that I'm talking about?

  If you are using a component FLVPlayback instance, you can use the VideoEvent.COMPLETE event (that you will need to import).  If you use the netstream class, you can use the onPlayStatus event.

• You will need to download a CS5 license to new computer. Old computer isn't available (crashed). Non-responsive support chat

  What is the best way to proceed?

  If you are in a hurry to use the software... If you have only installed it once before allowing you to have two facilities enabled, then you should be able to wortk with the new download files immediately.  If/when get you your hands on people chat they will disable everything that is currently enabled, so you would need to activate the new installation after that.  But there is no urgency to get the old installation disabled unless you must have two installations of work immediately.

  The chat feature is apparently a game of chance... works well for some but not for others.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Script help please. You will need to save it as a different file type.

  I have a script which now saves files as jpg files.  I need to save a png image.  Someone would be able to help me with this?

  var doc = app.activeDocument;

  var Path = doc.path;

  var Name = doc.name.replace (/ \.) [ ^\.] +$/, ''); Var suffix = "_full_l"; var saveFile = file (path + "/" + "full_l" + ".jpg"); SaveJPEG (saveFile, 8);

  function SaveJPEG (saveFile, jpegQuality) {jpgSaveOptions = new JPEGSaveOptions(); jpgSaveOptions.embedColorProfile = true; jpgSaveOptions.formatOptions = FormatOptions.STANDARDBASELINE; jpgSaveOptions.matte = MatteType.NONE; jpgSaveOptions.quality = jpegQuality; activeDocument.saveAs (saveFile, jpgSaveOptions, true, Extension.LOWERCASE) ;}}

  Here you are...

  var doc = app.activeDocument;
  var Path = doc.path;
  var Name = doc.name.replace(/\.[^\.]+$/, '');
  var Suffix = "_full_l";
  var saveFile = File(Path + "/" + "full_l" + ".png");
  SavePNG(saveFile);
  function SavePNG(saveFile){
      pngSaveOptions = new PNGSaveOptions();
      pngSaveOptions.embedColorProfile = true;
      pngSaveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
      pngSaveOptions.matte = MatteType.NONE;
      pngSaveOptions.quality = 1;
   pngSaveOptions.PNG8 = false;
      pngSaveOptions.transparency = true;
  activeDocument.saveAs(saveFile, pngSaveOptions, true, Extension.LOWERCASE);
  }
  

• FRUSTRRATED. you will need to remove the Yahoo toolbar, remove BING and switch back to Google, open new windows in windows separte NOT tabs. Help, please!

  1. I didn't want Yahoo toolbar, but I can't get rid of it!
  2 need to change the new opening of the tabs in a single window several glass separte windows.
  3. somehow, BING has become my default page. How to return to GOOGLE?

  I also use the 3.6.19 version and do NOT want to upgrade to the new version of terrible. Please help thanks 3.6

  In the search bar, click on the little arrow, scroll down and choose "Manage search engines".

  In the menu next, click on Bing , highlight it, and then click Remove.

  If this answers your question, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution to the same thing.

  Thank you.

• You will need to replace the drive hard, etc.

  Thanks, Hüffer

  Since I was 99% plug-and-play, which means when he says 'naked reader? My expectations are to connect the new disk, run the recovery disks, run my backup files and go from there. It is much more difficult than that?

  Furthermore, what about updates since I generated recovery discs?

  Mr. Donovan

  You should kick him out on the original thread so that people can see it and understand where we have been.

  Yes it's Plug and play at the level of the material... Plug the drive and use it, but it just means that the system detects the drive as material. You still have prep. it and load it with software, but the recovery disc that does for you. If you have used HP Backup and Recovery Manager, you will get a software to factory installation (or maybe a simple OS with the drivers if you have a newer version of the software and chose this option for backup). It's like a time machine, so you have to go back to the future by running Windows Update and reinstall all software non - OEM and then that update (e.g. MS Office) and then migrate your old files on. It's a good afternoon, turned in the tuckus but better that lose everything.

• You will need to change the permissions for the camera application.

  Original title - fresh paint App - settings

  I was testing the waters and accidentally leave refused to use the camera to the computer.   Now, when I click on the camera, it says

  "This application requires permissions to use your camera.

  "You can change this in the settings of the application.

  HOW DO THE APP SETTINGS?   :}

  Hello

  Thanks for posting your query on the Microsoft Community. I understand that you need help to change the permission to use your camera application. I will certainly help you in this matter.

  Method 1:

  Open the camera app, and then follow the steps mentioned below:

  1. Press Windows + C keys on your keyboard to open the bar of charms.
  2. Click the settings option.
  3. Select permissions .
  4. Turn on allow this application to access to your: Webcam and Microphone option.
  5. Close the camera application by pressing Alt + F4.
  6. Take control of the camera application if the application works.

  Method 2:

  If the problem persists please try to troubleshoot the app Windows 8 Apps troubleshooting to diagnose and fix the problem. Please click on link below to run the Troubleshooter:

  http://go.Microsoft.com/fwlink/p/?LinkId=268423

  See also below article for more information:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  Thank you.

• You will need to validate the format of the time 24 hours with the check constraint.

  Hello

  I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

  ALTER TABLE ADD RESERVATION

  CONSTRAINT CNST_CHK_VB_ACT

  CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

  ENABLE

  NOVALIDATE;

  Rgds,

  Athuru Mithuru.

  Hi, Athuru,

  Athurumithuru wrote:

  Hello

  I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

  ALTER TABLE ADD RESERVATION

  CONSTRAINT CNST_CHK_VB_ACT

  CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

  ENABLE

  NOVALIDATE;

  Rgds,

  Athuru Mithuru.

  Let's start by defining precisely what you want.  For example

  1. The 1st character can be 0, 1, or 2.
  2. The 2nd character can be any number EXCEPT if the 1st character is '2', then the 2nd character must be in the range ' 0 'to 3'.
  3. The 3rd character can be '0' and '5'
  4. The 4th character can be any digit.

  It's pretty simple code like a regular expression with the exception of the exception in the 2.   Here's a way to get around that:

  REGEXP_LIKE (law on the)

  , ' (' || -options for the first 2 digits of start

  "([01][0-9])' |" --0 or 1, followed by another digit

  '| (2[0-3])'    || -2 followed by 0, 1, 2 or 3

  ')'              || -end of the options for the first 2 digits

  '[0-5]'          || -any digit between 0 and 5

  '[0-9]' - a figure

  )

  As others have said, think about the type of data.  How will you use this column?  If you really need a column which reflects a time of day, but not special, then perhaps an INTERVAL, or a NUMBER (for example, the number of hours after midnight) rather than a string.

• I need to save the file add 3 sequence of digits almost I'm done but I need help

  Hi all

  Almost, I finished this script but I need three digit sequence only

  But now he saved single digits only

  When I run more than 100 files in a single batch

  I need to save FileName_001.Extension

  FileName_011.Extension

  FileName_101.Extension

  FileName_111.Extension

  FileName_999.Extension

  Now he saved only single-digit

  Please correct

  activate the double click from the Macintosh Finder or Windows Explorer

  #target photoshop

  gFilesToSkip = Array ("db", "xmp", "thm", 'txt', 'doc', 'md0', "tb0", "adobebridgedb", "adobebridgedbt", "bc", "bct");

  var inputFolder is Folder.selectDialog ("select a folder of documents to process");.

  OpenFolder();

  function {OpenFolder()

  var filesOpened = 0;

  List of files of the var = inputFolder.getFiles ();

  for (var i = 0; i < fileList.length; i ++) {}

  If (instanceof file in the list of files [i] & &! .hidden fileList [i] & &!) IsFileOneOfThese (list of files [i], gFilesToSkip)) {}

  Open (fileList [i]);

  filesOpened ++;

  var docPath = createFolder ("~/Desktop/EPS");

  suffix var = "_";

  var fileName = activeDocument.name.match (/(.*)-.) [ ^\.] +$/)[1];

  var epsFile = new queue (docPath + "/" + fileName + suffix + [i] + '.eps');

  var doc = app.activeDocument;

  epsSaveOptions = new EPSSaveOptions()

  epsSaveOptions.embedColorProfile = true

  epsSaveOptions.encoding = SaveEncoding.JPEGMAXIMUM

  app.activeDocument.saveAs (epsFile, EPSSaveOptions, true, Extension.LOWERCASE)

  app.activeDocument.close (SaveOptions.DONOTSAVECHANGES);

  }

  }

  Return filesOpened;

  }

  function IsFileOneOfThese (inFileName, inArrayOfFileExtensions) {}

  var lastDot = inFileName.toString () .lastIndexOf ('. ');

  If (lastDot ==-1) {}

  Returns false;

  }

  var strLength = inFileName.toString () .length;

  var extension = inFileName.toString () .substr (lastDot + 1, strLength - lastDot);

  extension = extension.toLowerCase ();

  for (var i = 0; i < inArrayOfFileExtensions.length; i ++) {}

  If (extension == inArrayOfFileExtensions [i]) {}

  Returns true;

  }

  }

  Returns false;

  }

  function createFolder (path) {}

  Var folder = Folder (path);

  If (theFolder.exists == false) {theFolder.create ()};

  Return (theFolder)

  };

  Hi Sasi,

  Here's the corrected code...

  -yajiv

  activate the double click from the Macintosh Finder or Windows Explorer

  #target photoshop

  gFilesToSkip = Array ("db", "xmp", "thm", 'txt', 'doc', 'md0', "tb0", "adobebridgedb", "adobebridgedbt", "bc", "bct");

  var inputFolder is Folder.selectDialog ("select a folder of documents to process");.

  OpenFolder();

  function {OpenFolder()

  var filesOpened = 0;

  List of files of the var = inputFolder.getFiles ();

  for (var i = 1; i)< filelist.length;="" i++="" )="">

  If (instanceof fileList [i] file &! .hidden fileList [i] &!) IsFileOneOfThese (list of files [i], gFilesToSkip)) {}

  Open (fileList [i]);

  filesOpened ++;

  var docPath = createFolder ("~/Desktop/EPS");

  suffix var = "_";

  var fileName = activeDocument.name.match (/(.*)-.) [ ^\.] +$/)[1];

  If (I > 0 & I)<>

  var epsFile = new queue (docPath + "/"+ fileName + suffix +"00" + [i] + '.eps');

  }

  If (I > 9 & I)<>

  var epsFile = new queue (docPath + "/"+ fileName + suffix +"0" + [i] + '.eps');

  }

  {if(i>99)}

  var epsFile = new queue (docPath + "/" + fileName + suffix + [i] + '.eps');

  }

  var doc = app.activeDocument;

  epsSaveOptions = new EPSSaveOptions()

  epsSaveOptions.embedColorProfile = true

  epsSaveOptions.encoding = SaveEncoding.JPEGMAXIMUM

  app.activeDocument.saveAs (epsFile, EPSSaveOptions, true, Extension.LOWERCASE)

  app.activeDocument.close (SaveOptions.DONOTSAVECHANGES);

  }

  }

  Return filesOpened;

  }

  function IsFileOneOfThese (inFileName, inArrayOfFileExtensions) {}

  var lastDot = inFileName.toString () .lastIndexOf ('. ');

  If (lastDot ==-1) {}

  Returns false;

  }

  var strLength = inFileName.toString () .length;

  var extension = inFileName.toString () .substr (lastDot + 1, strLength - lastDot);

  extension = extension.toLowerCase ();

  for (var i = 0; i)< inarrayoffileextensions.length;="" i++="" )="">

  If (extension == inArrayOfFileExtensions [i]) {}

  Returns true;

  }

  }

  Returns false;

  }

  function createFolder (path) {}

  Var folder = Folder (path);

  If (theFolder.exists == false) {theFolder.create ()};

  Return (theFolder)

  };