your computer cannot connect to the remote computer because the Office gateway servers Remote certificate has expired or has been revoked

Similar Questions

• Secure connection failed, how do I fix a secure site certificate has been revoked

  An error occurred during a connection to rserving.com.

  The peer certificate has been revoked.

  (Error code: sec_error_revoked_certificate)

  I'm having a similar problem. My error message says:
  The secure connection failed
  An error occurred during a connection to gtc4me.gvltec.edu.

  The peer certificate has been revoked.

  (Error code: sec_error_revoked_certificate)

  The page you are trying to view may not shown because the authenticity of the received data could not be verified.

   Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
  

  I tried to access the same site using IE and I had no problem. I checked the validity of the certificate of the site and the networking4all.com revealed no problems with the certificate. Any help would be appreciated.

• Cannot connect to the network or perform system restore after installing updates have been

  WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

  I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

  I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.

• Xbox 360 will not connect to the Media Center after that PC has been asleep

  My Xbox 360 connects to my Media Center as an Extender initially. When it works, it works very well. However, after my PC has spent time in a suspended state, it is at 75% chance that my Xbox won't be able to connect to the Media Center. Sometimes it will work, but more often it won't.

  Restart my PC will allow the Xbox to connect immediately, but this isn't an ideal solution. I wish I could have my PC of a suspended state wake and correctly connected to the Xbox media extender.

  Hello

  (1) did you make any changes before the show?

  (2) is the specific question when the computer wakes from sleep?

  This problem may occur when the power is suspended in the media extender. I would have you go through the articles that might be useful.

  Method 1: Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Method 2: Windows Media Center Extender: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Reference:

  Set up Windows Media Center on the Xbox 360 (Windows 7)

  http://support.Xbox.com/en-in/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Windows-7

  Let us know if that helps.

• wireless network always connects to the profile virtual again once it has been removed from manage networks wireless on vista Home premium

  remove the wireless network problem

  Hi bokononist,.

  I suggest you go to your network card making and download / install the latest drivers.  I suggest that you check your system for corrupted files.  You use the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:

  • 1. Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get message "this certificate has been revoked by the CA.

  I GOT THE DIGITAL CERTIFICATE AND ENTER IN OUTLOOK EXPRESS, ALL WORKED FOR A WHILE, THEN I GOT THE ABOVE MESSENGE BUT CERTIFICATION AUTHORITY SHOWS IT AS BEING ACTIVE AND GOOD.

  Hello

  Certificates are issued with a design lifetime and expiration date explicit. A certificate may be issued for one minute, thirty years or even more. Once issued, a certificate becomes valid once validity period is reached, and it is considered valid until its expiration date. However, various circumstances may cause a certificate to become invalid before the expiry of the validity period. These circumstances include the change of name, change of association between subject and CA (for example, when an employee leaves employment with an organization) and compromise or suspected of the corresponding private key. In such circumstances, the certification authority must revoke the certificate.

  http://TechNet.Microsoft.com/en-us/library/cc700843.aspx

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• Remote Desktop is enabled on my computer, but I cannot connect to it remotely.

  original title: Remote Desktop

  conectivity remote desktop is active, but I can't conect to my computer remotley

  conectivity remote desktop is active, but I can't conect to my computer remotley

  How to ask a question...

  http://support.Microsoft.com/kb/555375

  http://www.officeforlawyers.com/howask.htm

  *********************************************************

  Assuming that the host/server [DRC] remote desktop PC running Windows 7 Ultimate/Pro/Enterprise or Vista Ultimate/Pro/professional or XP Pro/MCE...

  RDC is enabled on the server/host DRC PC?

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  It's on your local network and if so you call by computer name or address LAN IP?

  If you cannot connect through the LAN using the name of the computer can connect using the host/server local DRC PC LAN IP?

  Can you ping the host DRC/server PC of the RDC client?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  Test it on your local network...

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  If you can connect successfully on your local LAN but can't remember, from a remote location, you have TCP Port 3389 open on the firewall and/or router as the server/host DRC PC is behind. Call using the public IP address of the router or the server/host DRC if your connected directly to a modem. You must also assign the host/PC one DRC address static IP of the server so if you restart the server/host DRC PC it keep its local LAN IP. Do not do can ruin any port forwarding system through any router your behind.

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  If your on a remote site you are trying to connect to the host PC DRC/server through a VPN? If Yes can you ping the server/host DRC PC when you have the active VPN tunnel?

  What are the exact error messages, if any, that you get when you try to connect with the DRC compression?

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Store Windows unable to download 'we cannot connect to the service you need right now. " Check your network connection or try this later.

  Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.

  Original title: Windows Store-downloads

  Try the troubleshooting steps below after completing the methods provided by Vinodh.V

  Method 1: Make sure that the Date and the time is accurate

  Open quick run (Windows key + R)
  Type timedate.cpl , and then click OK
  Click the Internet time tab

  Click change settings

  Click update now , and then click OK once the time is Sync

  Method 2: The problem may be caused by the Proxy settings

  If you use a Proxy

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Of that type the below command and press enter

  netsh winhttp import proxy source = ie

  If this does not work, you can reset the proxy settings using below command

  netsh winhttp reset proxy

  3:Fix Windows Update method

  Running Windows Update troubleshooting tool can solve some problems.

  Open Control Panel

  Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view

  Select the fixed problems with Windows update.

  Select Next and then click Finish when the process is complete

  Method 4: Search for the latest Windows updates

  Open quick run (Windows key + R)
  Type wuapp , and then click OK
  Click check updates
  Download and install all pending updates.
  Restart the computer

  Method 4: perform the Scan SFC

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Type in the command, and then press on enter

  SFC/scannow

  Method 5: Upgrade to the Local account and switch it to the Microsoft account

  To switch to local accounts

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click on your account
  Click Disconnect
  Enter the current user password and click Next
  Click sign out and finishing
  Log on to the user account

  To switch to the Microsoft account

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click to connect to a Microsoft account
  Enter the current password
  Enter the password of the Microsoft account and click Next
  Click switch

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?