your pc needs to be repaired Help!

Similar Questions

• "Your PC needs to be repaired - no code error or anything"

  Hello

  I rebooted my laptop today and got your PC needs to be repaired message but that is everything that appears on the screen, no code error or something else, literally that sentence. I have the windows CD that allows me to solve problems etc, but I have no idea where to start as a result of not having an error code. I was wondering if anyone has had or seen something similar and might help or might suggest that what I have to do in the first place.

  Thank you

  Hi Sam,

  There are several factors behind this concern. Let's see if we can address this in a few simple troubleshooting steps:

  -Press the Windows key + r.

  -Type cmd , and then press enter.

  -Type sfc/scannow , and then press enter

  -Let him finish and restart.

  Sfc/scannow command say your Windows search and replace corrupted system files.

  If this does not work for do you a System Restore. Looking to restore your PC to an earlier point in time.  (last resort)

  Feel free to update us if you need further assistance.

  Best regards.

• Get the error Code: 0xc000000d and your PC needs to be repaired.

  * Original title: Error Code: 0xc000000d

  Hello, I have Windows 8, and at random, I had projected blue and the computer reset and now I have this message on my computer when I try to start it

  Your PC needs to be repaired

  The Boot Configuration data file is missing some required information

  File: \Boot\BCD
  Error code: 0xc000000d

  You will need to use the tools of recovery on your support of instillation. f you do not have any media (such as a disc or usb device) please contact your system administrator device

  I can't pass this screen please help. The only disc that came with this computer is a reinstallation DVD.

  Hello

  Please follow the steps mentioned here and see if they help you:

  http://www.kapilarya.com/fix-the-boot-configuration-data-file-is-missing-some-required-information

  Hope this helps, good luck :)

• Envy DV7 HP: HP DV7 Envy your PC need to be repaired a required device is not connected

  I have 10 Windows on my HP DV7 envy.  When I turn it on I get the error "Your PC need to be repaired a necessary device is not connected."

  None of the keys work, which means I can't select startup options or select System Restore.  It just brings back me to the blue screen with the error message. So I can not try all options, I found on the internet that are made not boot master book or disable secure boot record.

  I ran the tests of memory and fast disk, as someone else suggested that memory may be bad.

  (HP please don't answer back Windows 10 is not supported.)  Microsoft has given to all customers of Windows 8. Besides it is not at all compared to the question, since the system cannot not even load the operating system.)

  I fixed that basically like this:

  1. safe mode in the bios
  2. change the boot order to put USB in the front
  3. Install Ubuntu from USB, so erase Windows

  I got stuck because I had copied the Ubuntu ISO was not a complete file.

  No doubt I could able recover if I asked HP ship me a replacement disc for Windows 8.1

  Also, I learned that you press f8, f9, f10 or f11 when you turn on the computer.  You must wait until the screen goes to sleep again and repower the computer to switch to another option.  Now key people will work until you do this.

• HP Pavilion X 2: recovery - your PC needs to be repaired a required device is not connected or is not accessible

  After installing Windows 10 PC is on an infinite reboot cycle, I tried the system diagnostics and it meets the test. I also tried to change the BIOS set up but nothing seems to work and it keeps restarting now. After restarting 3 times, it shows that the installation of Windows and it shows that it is 64% before restarting and this cycle keeps repeating.
  
  If there is a solution that I would be grateful if it is to be provided for me.

  Thank you for your help

• Laptop HP 15: Recovery - your PC needs to be repaired error: 0xc0000225

  Hello

  I tried C drive partitioned using the easy Partition Manager. It asks for a restart and after a reboot it ask for recovery.

  I had also created the USB bootable for windows 7 and tried to recover with the recovery drive. I said authentication fails.

  Hello

  If you try to start Windows 7, you must first change some setings in the bios as follows.

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  You must set the Secure Boot to disabled and legacy devices on " Enabled".

  When you're finished, press f10 and select this option to Save the changes.

  You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Insert the Windows 7 installation Flash Drive and the laptop shutdown .

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select the Flash Drive (uefi) option and press ENTER.

  Kind regards

  DP - K

• BCD needs to be repaired Windows 8

  Hello

  I am trying to solve this problem, a few minutes ago, I walked into the installer of Windows 8 by USB and he said that he could not install the disk and repair.

  Now if I try and come back in the USB bootable he launched just up an error saying:

  Recovery

  Your PC needs to be repaired

  File: \Boot\BCD

  Error: 0xc0000098

  Now looking at these errors we just said to run the recovery media. I try and I just get the error again and again recovery screen.

  I moved the USB at the top of the boot order and tried to manually switch to it, just reocvery error page every time!

  Help! His work the laptop!

  Hello

  If it is a fairly recent machine, it probably uses UEFI BIOS...

  If this is the case, you might look for some type of selection for the flash drive UEFI BOOT instead of simply select the USB port...

• PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

  I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

  "Recovery".
  Your PC needs to be repaired
  File: \Windows\system32\winload.exe
  Error code: 0xc000000e
  You will need to use the tools of recovery on your installation media, etc...

  Press Enter to try again

  Press F8 for startup parameters

  Press F9 to use another operating system.

  It allows me to boot from another HD after pressing F9 several times.

  Any advice would be appreciated.

  Kind regards

  Anthony

  I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
   
  Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

  Choose your language. Click next
  You will now see install in the center of your screen. On the lower left side you can see fix your computer.
  Choose repair.

  You will have several options, including:
  Refresh your computer
  Restore your computer
  Advanced options

  Choose Advanced Options.
  Launch the command prompt
  Enter the following commands one at a time who hit enter after each command.
  Bootrec /scanos
  Bootrec /rebuildbcd
  Bootrec /fixmbr
  Bootrec /fixboot
  Restart the computer once the last command finished

• Location of data by default Windows Update has changed and needs to be repaired.

  Original title: PROBLEMS WITH WINDOWS UPDATE LOCATION DATA; I have a windows vista IE 8 32 and 64-bit system.

  I can't get my windows update to automatically update. I used the "fix it" tool Microsoft and he finds issues and some fixed (as windows update components), but it wouldn't fix the other issue. It is said that the location of the default data Windows Update has changed and it needs to be repaired. The "fix it" tool would not fix it so I don't know what to do. There, any help would be greatly appreciated. Thank you.

  Hello

  Did you of recent changes to the computer that caused the problem?

  Method 1:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• First aid found corruption that needs to be repaired.

  "First aid found corruption that needs to be repaired. To repair the boot volume, run first aid of recovery ".

  I installed Sierra but first aid called the El Capitan 10.11.3 volume.

  Where is the recovery?

  your really

  Baffled

  If you are in recovery mode access disk utility from the drop down

  On OS X Recovery - Apple Support

  then fix the volume

  https://support.Apple.com/kb/PH22243?locale=en_US

  otherwise if you are on OS X utility can be found in

  Macintosh HD/applications/utilities/disk utility

• update failed opinion said: something is trying to trick firefox by accepting a security update. Please, contact your network provider and ask for help. help please

  What is the solution to this issue - is there one that will not make my eyes roll back in my head? What is a true message from Firefox?

  the popup looks like this:

  [firefix logo] Software update

  Update failed

  Something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help

  Whenever you get a message / popup that software / files must be updated.
  
  DO NOT USE ONE OF THE LINKS PROVIDED.
  
  If this can be a legitimate message, could also be a Virus or Malware.
  No matter when you want or need to check updates.
  Go to the website of the real owner of the program in question.
  For example, for Firefox, go to Mozilla.org
  or Firefox in any language.

• I need to disable the 'Help' option in the main menu.

  I am running Public Fox 1.09 as an addition in our school district, because it allows me to keep the students from our proxy. They discovered that all that they have to go to 'Help' and 'restart with disabled modules. They can then select "Not of Proxy" and get anywhere that they want. I need to disable the 'Help' option in the main menu.

  Hello NeonLeon, if it would be possible in principle to hide some menu entries, the next thing that your students will discover is that you can also get in safe mode by pressing the SHIFT key while launching firefox, so it's no solution...

  You can use a mozilla.cfg file in the firefox program folder (where the students hopefully will have no write access) to lock some preferences as the configuration of your proxy, for more information, see: http://kb.mozillazine.org/Locking_preferences

• Hello I have a dv6 laptop 6119. I want the recovery of backup on DVD disc. need step by step help

  Hello I have a dv6 laptop 6119. I want the recovery of backup on DVD disc. need step by step help

  I suppose you want to create a recovery disc for your laptop? You can find instructions at the link below

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01895783#WhenCreate

• the location where the Windows Update stores data has changed and needs to be repaired. How to repair?

  This statement appears when the windows update don't load new updates.  In addition, I can't turn on Windows automatic updates. Windows XP SP3

  This statement appears when the windows update don't load new updates.  In addition, I can't turn on Windows automatic updates. Windows XP SP3

  Try...

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

• Dotnet 4.0, cannot be upgraded - "Setup cannot continue because a previous installation requires your computer needs to be rebooted...» »

  original title: Dotnet 4.0, cannot be upgraded.

  I need help on problem mentioned below, the error obtained when upgrading to 4.0 on XP with SP3 dotnet even machines with and without the dotnet 3.5 installed.

  "error: Setup cannot continue because a previous installation requires your computer needs to be restarted." Restart your computer and run the Setup again.

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/download/en/details.aspx?ID=17851

  http://www.Microsoft.com/downloads/en/default.aspx

  For reference:

  How to reset the Windows Update components?