your suggestion

Similar Questions

• Tried all your suggestions and always receive "Unable to connect" when using ANY search engine.

  Can't use any search engine of FF 40.0.3 on Macbook Pro model with 10.8.5 OS 9.2. Receive "Unable to connect" message when you try to use a search engine. Other than the search engine and Mozilla Web sites to connect properly. 40.0.3 on another Mac FireFox works fine without any problems.

  In addition, I can not access the FF "Get modules" page or the home page of Mozilla. Search engines will connect not their home page or the search bar. Problem just started. I had previously been upgrade and have resorted, FF 40.0.3 without problem when it was issued. Solutions of attempts included refresh FF, launch FF in safe mode, run with all plugins disabled, graphics hardware acceleration disabled. None of these fixed the issue.

  Had already tried your suggestions, without success, but has once again to be sure. Without success. However, I made a further exploration of my own and found out that IPv6 is set to "Link Local" only in my router. I have reset on 'Automatic', the router reset to update, and my problem was solved. So it was the IPv6 setting (unlikely) or the router reset (probably) that solved the problem, or it is your suggestions I tried and did not work, COMBINED with the router reset which solved the problem (quite possible).

  Thanks for the comments!

• Hi all.. your suggestion... FUTURE OF ORACLE FORMS

  Hi all... I am a student who is currently studying the oracle forms and reports 10g.
  I live in INDIA
  
  oracle forms have a future? I'm a freshness, also know little of java.
  
  What should I expect my starting salary would be... Please give your suggestions... Please

  oracle forms have a future?

  For existing applications forms/States: Yes
  http://www.Oracle.com/technetwork/issue-archive/2010/toolssod-3-129969.PDF

  For new applications: No.

• Download dupicate photos still after that I used your suggestion

  I try to use the answer you suggested but does not work. I have a samsung moment phone and its still downloading duplicate photos. Do you have more advice or a phone number.

  It would be bettter contact samsung for more information

  have you tried with the samsung pc suit software for your phone?

• Suggestion BOX for first Pro! Add your suggestions. you want to see in CS 6.5 or CS7

  1. I would be grateful if you can import and attach files like in avid media compose.

  Sometimes we work on projects of greater and different computers, but if I open the project on another computer I have to recreate a link to the files, which is sometimes very annoying and sometimes I take my work home, but can't because the files are placed on different servers/sites I just can access the work. Thus, the importation of 'real' would be very useful.

  2. you should also be able to have the opportunity to structure your project as in avid media compose.

  
  If you create a new project, you need just a place/place where your files are stored as the Avid MediaFiles folder.

  3. on the display of the list - it should be possible to sort of assets, and in the project window, the icons are still at large (even if you are already chosen the smallest)

  4 speed/duration - it should be possible not only to adjust the % would be nice, also adjust the frame rate.

  for example, you have a project/clip with 25/24 fps. and you want to play at 24 / 25 fps without jump/interpolation of frames.  Also when you return the it, it should be possible to choose this option (with the information that the clip will be played more slow or faster, depends on what you want), it's just like you should accelerate or slow down the indicator in the timeline panel.

  5. is it already possible to choose a window via keyboard?

  
  If the source monitor Panel is enabled and I want to activate the timeline, can I do this without using the mouse, as (alt + F4)?   Jump between the source-project monitor, the window of the project, the timeline...  This would increase my SPEED work also if you in the source monitor and want to jump in the effects Panel should be possible without a mouse (tab).

  6. If you are already working on a project and you acknowledge that you have the settings wrong audio track it would be possible to change from mono to stereo and stereo to mono.

  7. multicam

  
  If you have configured a session with numerous Multicam (and/or) large files, it would be nice if you could do a right click on it and choose something like - convert achievable quality (proxies) - (also the size of the video for example 720 p to 360 p should shrink) (option box where you can adjust the quality/size and also suggest what pro first) because in many cases must be converted manually and these are a few extra steps you need to do, what I think is not necessary. When you are finished with the installation you need to right click again and choose - replace it with the original of the files - or something like that.
  MODE MULTICAM editing is sometimes still a pain. We want to change sometimes in Multicam - monitor, but whenever I have stop recording and press play and I want to just change the camera, I get a new installation I don't want (and rec automatically turns the) then when th rec is on and I'll frame and click in the multicam monitor on the camera I want to It does not add an editing tool. This is so weird and multicam makes uneasy work.

  I am really interested, what are your ideas and maybe adobe chooses some of them (hopefully) to improve the first pro.

  1. use Project Manager to collect your files in a new directory.

  2. have all your files on a disc is not normally a very effective way to edit. It is best to keep things on various drives on your PC.

  3 a. agreed. Put in a request to sort icon mode feature. https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  4 create a new sequence by using the rate you want to use and copy and paste your videos in the new sequence.

  5. There is of the hotkeys to switch between the panels. SHIFT - 1, Shift 2, shift - 3 etc.

  6. sorry, but I don't understand this one. The audio tracks are automated in CS6. Drop the audio, and you get a track that matches.

  7. I do not use a lot of Multicam, but since I was a fast RAID I don't have reading problems that require proxy. I hope someone else can handle this for you.

• Firefox does not start in Windows 8 and none of your suggested solutions worked

  I was not able to start Firefox and I get no message at startup. I tried all the solutions of your support pages, but none works, as for most of them you need to open the browser.
  I uninstalled and reinstalled the browser, but in vain.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Tried all your suggestions, but still cannot fix the runtime error. How can I reinstall Windows 7 without losing everything?

  I tried a soft boot, it does not solve the problem.  I deleted all the redistributable files from Microsoft, and then restarted, I still have the same error message, even if I had deleted the files.  I reinstalled the updated files, the problem persists.  I'm frustrated and tired of this and now just want to know how to reinstall Windows 7 Premium Edition while preserving my other programs and files.

  If you reinstall, you will need to backup your data, do the reinstall, and then reinstall your programs.  And before that, you will need to have all the drivers from the manufacturer of your computer.  If you can restore to the factory settings, which may save you the hassle of dealing with drivers.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is approximately $90 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• HP Elite 1090-T H8: seeking your suggestions for upgrading the power supply for a new video card

  I have a HP EliteH8-1090 t who is about a year, but with an AMD Radeon HD 6570 low power graphics card and a 450W power supply. I want to upgrade the 650W power to support the installation of a replacement graphics card.

  I tried to replace the HP 450W with Corsair TX650 and Corsair TX850 food. The system appears to power (DVD drawer opens and closes, the hard disks spin, fans run) with either a Corsair, he's stuck at this point. My system is unable to enter start mode when either power supply is installed - it seems stuck in a mode of seed, and the monitor still asleep.

  Can someone please advise on a compatible power supply for HP system? I'm puzzled by why a simple exchange of a power supply does not work. Just like a record, the system has a card mother Pegatron IPMTB-K (Truckee).

  Thank you!

  No problem. I wish you good luck with it. On a positive note the HX650 is a much better than the TX650 ILA unit internal quality and what I like is the best it's quite fan fan much quieter than the TX650 while helping your organization of cable being modular and help keep temperatures cooler in your computer case.

• Canon 70 d PES 12 - tried your suggestions and FAILURE

  Used a Canon 70 d.  Photoshop Elements 12.  Windows 7 (64-bit).

  File > open > unable to complete your request...

  Viewed help forums.

  Downloaded ACR, 8.2.

  File > open > unable to complete your request...

  Downloaded ACR 8.4

  File > open > unable to complete your request...

  Downloaded ACR 8.6.

  File > open > unable to complete your request...

  Help!

  ? Hello

  Have you tried to go to the menu help and select updates?

  Who should download and upgrade your system - failure, you get an error message?

  Brian

• Procedure of... Please take a look and give your suggestion

  Hi all
  
  Please have a procedure below.
  Suggest me if I do something to make it more effective?
  Because I am very very new to pl/sql.
  I have to send to the revision of the code. Before just to make sure that everything is good and logically and all.
  Thanks in advance.

  PROCEDURE proc1 (
    in_report_parameter_id   IN      NUMBER,
    in_date_format_mask      IN      VARCHAR2,
    in_start_date_time       IN      TIMESTAMP,
    in_end_date_time         IN      TIMESTAMP
  )
  AS
       
      my_current_date_time TIMESTAMP;            
   
            
  BEGIN
       
         my_current_date_time := TRUNC(in_start_date_time);
         
         DELETE FROM table1;
   
    LOOP
      
       EXIT WHEN my_current_date_time >= in_end_date_time;
         
       INSERT INTO table1 (
                   date_time )
       VALUES (my_current_date_time);
                    
        my_current_date_time := my_current_date_time + numtodsinterval(1, 'DAY');
                 
    END LOOP;
          
    DELETE FROM table1
       WHERE   TRUNC (date_time) IN
       (
            SELECT TO_TIMESTAMP(report_parameter_value, in_date_format_mask)
              FROM report_parameters
            WHERE report_parameters.report_parameter_id    = in_report_parameter_id
            AND report_parameters.report_parameter_group = edr_rpt_constants_pkg.date_format_mask_group
            AND report_parameters.report_parameter_name  = edr_rpt_constants_pkg.excluded_date_name
       );
  
  END proc1;

  Hello

  You don't mention what the procedure is supposed to do, so I can't say if it does at all, and still less well. Put some comments in the code to describe what you are doing.

  To remove all the lines of table1, "TURNCATE TABLE table1" is much faster than "DELETE FROM table1". You cannot RESTORE a TRUNCATE TABLE command, however.

  You can INSERT exactly the lines you want in a single INSERT statement. There is no need of a LOOP (which is inefficient). I'll try to find a link and post it later. (Fact: see below.)
  There is no need to add the lines you want to DELETE: Add a WHERE clause so that they don't get inserted in the first place.

  Published by: Frank Kulash, June 18, 2009 13:29

  [This thread | http://forums.oracle.com/forums/message.jspa?messageID=3351634#3351634] shows how to generate a result set that contains one line per day between two given dates. You can use it in a «INSERT INTO table1 (date_time) SELECT...» "statement.

• Updated by your suggestion, now laptop won't connect

  I turned on the laptop, a msg came that I had to update to Firefox I did. Now I can connect is no longer on the internet or anything. He is a professional computer and it is essential that this gets fixed! I couldn't even connect to Mozilla help so I had to go to a PC to communicate. Now, he is trying to fix this PC and is not the problem!

  See also:

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-25-support-for-Norton-toolbar/TD-p/1041995

• 159 - PIN MODE Satellite M70 - your suggestions

  Hello

  In time, I would try the PIN MODE (forcing a FSB of 133 MHz processor that works with 100 MHz and constant ratio FSB = 17) in my Toshiba laptop.
  I buy on auction Pentium M 1.7 GHz/2 MB/400 Mhz processor.
  Please don't tell me that the processor will be overheating I saw the two datasheet (my current processor pentium M750 and pentium M735) and first issue 27W and second 21W.
  I calculate that if I change the FSB the emit of heat will be about ewen Pentium M750.

  You have experience with this method of overclocking... ?

  You won't believe me, but I have the same laptop model and I am very interested to hear how you do it. What application you want to use to change the FSB?

  I agree with you on the CPU overheating. In my opinion of the processor the overheating is not possible because thermal management works on CPU and if the CPU will be extremely hot operations speed goes down.

  Overclocking is very interesting and not so much discussed topic on this forum.
  I'm really curious to know if other people have positive experiences with this kind of things.

  To be honest overclocking can be dangerous (property damage) and risky. Be careful with this.

• I can t install flash player on Samsung, your suggestions pls device

  I can t install flash player on Samsung device pls help

  Hi G K,.

  Flash Player is not supported on any mobile device.

  --

  Maria

• I have a simple question, not mentioned in one of your suggestions.  Plaids, a phone number, I can ask for help.  I promise you it will take five minutes > > > > >

  I'm expecting someone answer or do I just start?

  is anyone out there... Please?

• Please share your failure on suggestion

  Hi all
  
  I'm a DBA of Microsoft SQL Server and my company will implement Oracle in the coming months.
  
  The company we will be sent to training in the coming weeks, but I have a question about high availability/recovery that I can't wait until that class and I wanted your suggestion about this feature.
  
  It will implement Oracle 11 g under Red Hat.
  
  The question:
  What is the best way to get 100% automatically failover to a database Oracle?
  
  We have heard of two options:
  Level of Clustering operating system
  RAC
  Others?
  
  What are the advantages and disadvantages of these options?
  
  Thanks in advance for the help.

  Dear IgorSantosDBA,

  There is a tool called Data Guard for the protection of data on major sites and rescue and it is usable in the Oracle's Enterprise edition.

  If you are looking for the AP, go for the Real Application Clusters. Using data guard with FCAC is possible then I suggest you read the online documentation about them and take the course.

  It will be useful,

  Ogan

  Published by: Ogan Ozdogan on 12.Tem.2010 17:31

  Online documentation of the Oracle--> http://tahiti.oracle.com

  Ogan