Z6100: HP Z6100 has error code 46.03

Similar Questions

• HP Deskjet 3052 has error code...

  I tried to stop my printer from the other day, and it took a minute or two, compared to the second 5 regular one. He finally gave me this: "Error Code OXB022B902" I do not know if some of the zeros are supposed to be the "o" or the other way, but I would like to know what this code, like what has gone wrong. Thank you!

  Hi Dakota5525,

  I understand that your printer has an alphanumeric error code.   A code alphanumeric error means that your printer has a hardware problem.

  I'll take a look at the document below.

  Alphanumeric error

  Let me know how it goes.

• Microsoft LifeCam suddenly stopped working, has error Code 43

  I have been using an external camera from Microsoft "Microsoft LifeCam" on my Toshiba 305 and suddenly it has stopped working & and/or is therefore most recognizable when it is plugged.  Any suggestions on how to put it on again.  The camera that came with this Toshiba 305 is very grainy and looks like maybe the goal was scratched and does not have a good video image and the external camera did a great job for me with this laptop.

  One of the "warnings" or troubleshooting of the menus said the following:

  Intel (R) 82801 G (ICH7 Family) USB2 Enhanced Host Controller

  Windows has stopped this device because of problems (Code 43)

  Help!  and thank you Bill in Chicago!

  Hello Bill,

  Thanks for posting your question on the Microsoft Community forum.

  I apologize for the inconvenience caused to you.

  I understand that you have a problem with Microsoft life camera stopped working in the system and get the error 43.

  This issue would have occurred because drivers have been corrupted in the system.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Error codes in Windows, Device Manager please follow the steps in the link provided and check if it helps.

  http://support.Microsoft.com/kb/310123

  If the problem persists, please follow method 2.

  Method 2:

  Code 43: Windows has stopped this device because it has reported problems, please follow the steps in the link provided below.

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx

  If the problem persists, follow method 3.

  Method 3:

  Troubleshooting for the failures to find the new LifeCam hardware, please follow the steps in the link provided below and check if it helps.

  http://support.Microsoft.com/kb/929087

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  For reference:

  Please refer to the procedure described in the article below.

  Troubleshooting: Webcams

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

  Thank you.

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• Updates Windows installs, has error code 66 & 80070643

  Error code 66 & 80070643 appear when you try to install upgrades to windows 7. Happened since then went from broadband to the Wi - Fi

  * original title - computer will not install the updates of windows. Gives the error code 66A & 80070643. Previously no problem on broadband but since I use wireless connections problem is constant. No windows at all.* payments

  You can see this discussion earlier, linked: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• (KB951847) x 86 has error code 0 x 643

  Update installation failure what to do?

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Windows Update error Code 663 (kb951847) x 86 fails to install

  Windows update fails with error code 0 x 643
  XP, updates Auto, KB951847 and error code 0 x 643
  Error code: 0xC0000005 (cannot install KB951847)

• Windows XP - NICs has error code 10 - impossible to start this device.

  I tried to install McAfee 2011 on my pc and now I can't access the internet. I am running XP. Explore the msg on the internet says no card no installed wireless network. I checked the properties of the network connection and found one of the adapters network error code 10 - impossible to start this device. Since I have more access to internet to download the drivers, etc., how can I fix this problem?

  Hello

  I suggest you to download the latest network adapter driver by using another computer and transfer to the computer that is causing this problem and install the same.

  For more information about the error 10 code refer article.
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• I have a G62-355DX laptop and is 11 months old. and it won't start. It has error codes

  I have a G62-355DX laptop and is 11 months old. and it won't start. There error codes when I do a test of the system. DST short: failure failure ID: RTX6T9-5B75S5-XD003F - S 60, 903.

  Product ID: XH068UA #ABA

  Hello

  As the error code relates to a short drive Self Test failure - the only real solution to this is to replace the hard drive.

  As your laptop is still under warranty, contact HP to make arrangements for the replaced disk.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Has error code 66

  Code error 66 has after several attacks of Windows Update security update for .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x 64 systems (KB2160841)

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3>

• REC has error code 0 x 80242007 but can't seem to locate this error on your website

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Start here: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  ~~~~~~~~~~~~

  How to reset the Windows Update components?
  [Ignore the section to APPLY to, if a Win7 user;] Run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  NB: Access KB971058 via Internet Explorer (32-bit), not any other browser.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• can not update windows, 8024400 has error code

  I can't update windows, get the error message 8024400 a. have tried to repair, but it will not work until I update windows.

  What browser (exact version) you are using. ?

  Harold Horne MVP responded on 24 September 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  UTC/GMT is 01:04 Saturday, October 6, 2012

• My CD/DVD changer (DVP-C600D) has error code c:31:26. How can I fix?

  The status bar will open but will not close and remain closed.

  I turned it off and left, including the tests when I left the unit unplugged for several minutes. I'm puzzled. Help, please.

  Hi Michael,

  Welcome to the community of Sony!

  Check if the disc is dirty, scratched or badly inserted. Clean the disc and insert it correctly.

  If the problem persists, DVD changer needs to be repaired. I suggest that you're considering buying a last DVD changers with more advanced features, rather than to repair.

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• drive CD/dvd has error code 19 and 31

  I can't save anything on a disc, I get errow code19 and 31

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• error code 080024400 is when I update

  When I go to update or updates I get the 080024400 has error code how can I fix it

  Have you recently reload Windows, restored back to factory settings or make other changes to your computer?

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• the Photosmart b110 series printer: Ox19a0020 error code

  My printer has error code ox19a0020 I looked for alternatives to the HP site and I cleaned the printhead manually according to instructions and pulled the plug and replace etc etc and yet it still has the same error message. Help

  Hi @nannie07

  Thanks for getting back to me.

  I agree, you probably need a new printhead.

  Printhead replacement games are available from HP customer or authorized service providers assistance.

  Contact HP for service in all countries except Asia-Pacific.

  If you have completed all the above steps and your product still has a problem, the printer service
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.