ZX-6000 receiver not seenl

Similar Questions

• OfficeJet 6000: OfficeJet 6000 does not print

  Replace the ink cartridges for Officejet 6000 would not print.  It prints the words Page Windows printer to test a test page of color with a printer icon in the upper right, then at the center of page 4 with a white fill boxes; yellow fill, blue fill and a red fill.  That's all.  I touched a "print test page" and the paper comes out blank, although that normally shake it like the print head moves back.

  Hello @Pistol_shooter, greetings!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems printing using the Officejet 6000. I will do my best to help you with this problem.

  I suggest you first check the empty ink to ensure it is enough ink. Then proceed to clean the print head using the software installed on your computer. Since your computer desktop, double-click the printer icon, the printer wizard / solution Center will open. Go to settings and navigate to the cleaning of the printheads.

  I found a wonderful document that gives you instructions step by step to solve this problem. Please visit: http://hp.care/2dtFaXe

  Please let me know if that solves the problem. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• My LifeCam VX-6000 will not work. Rpet (initialization error) on all usb ports. I have windows XP

  My LifeCam VX-6000 will not work. Rpet (initialization error) on all usb ports. I have windows XP

  Hi John4452,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest to try the steps from the link to the following article and check to see if it helps:

  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software

  Troubleshoot failures to find the new LifeCam hardware

  I hope this helps.

• Compatibility of the 'wireless laser mouse 7000' with 'wireless laser mouse 6000 receiver.

  Hello

  One of my colleagues gave me his extra Wireless Laser Mouse 7000, but he gave me a Wireless Laser Mouse 6000 receiver. will be the mouse 7000 and 6000 receiver work? are they compatible?

  help someone?

  Hello

  Yes those should work - just install the software (Intellipoint) and configure the mouse than the 7000.

  IntelliPoint - free
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Inspiron 6000 can not see any hard drive.

  Inspiron 6000 can not see any hard drive.

  Readers can be seen and accessed by other machines.

  The BIOS seems to be set correctly, not that there is much that can be done for her.

  Seems that the motherboard is the question.

  Other thoughts?

  ST: FX34091

  
  

• Can you tell me why I'm received not allowed to modify a pdf file when I file creater?  I received the question as surity?

  cantrxoraqi9 you tell me why I'm received not allowed to modify a pdf file when I file creater?  I received the question as surity?

  If a form has been made with LiveCycle Designer, it can only be edited in LiveCycle Designer. This is a permanent restriction, there is no course Acrobat. It is not a security problem.

  LiveCycle Designer forms cannot be made available as far as I know (but I could be wrong here).

  If repeat you a similar content to PDF format, there is no way to reintegrate into the designer. You cannot mix the tools in this way. It is possible in LiveCycle Designer, or it is not possible at all.

• MacBook Air receive not of software up to date.

  My MacBook Air, mid-2012, 1.8 Ghz, 256 GB, stopped to receive or read updates from the Mac App Store.

  I am currently on OSX 10.11.4 but don't get 10.11.6 updates

  Other updates such as those for iTunes seem to be installed well (iTunes 12.4.2).

  It happened once before when I was on 10.11.2, with 10.11.2, I installed 10.11.4 using a combo update from the support page, hoping it might solve the problem, but apparently not. If I can't get the updates through the App Store, I will use the support download page, however, I would like to regain the ability auto-updated as I might miss updates of security, for example, I didn't know it have been updated due to the recently discovered vulnerability of "Stagefright-like".

  I am connected to the Mac App Store with a valid Apple ID.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then try to update. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Reset request receive not of password by email

  I tried to reset my password for the Firefox support and never received a reset by email link.

  Was able to fix this by clicking "this does not solve my problem" or something similar to that and put in place a new request to the support section. He asked a username and a password. Can now use this new user name and password to access Support "Firefox".

• Satellite Pro 6000 will not boot

  Hi all

  I have a 6000 Pro Satellite which is quite old, but until yesterday it was working fine. Today, it no longer starts. The lights are on (220v:green / power: Green / battery: orange), but the BIOS or the operating system does not start. Fan does not work either. The FN key seems to work - if I press it, the indicator light below the F11. If I press and hold the power button the power light turns off.

  I removed the battery to see if that would help, but it basically gives the save result (or not).

  Is it possible to do a hard reset? Or is it curtains for this laptop?

  You want to know your opinion on this one.
  JP

  Hello

  Try unplugging the power adapter and remove the battery the laptop for a while leave. Wait 20 - 30 minutes, reconnect all the pieces and try to start.
  If it won't work, I guess the hardware laptop works bad maybe that it s a motherboard (ESF) failure or the CPU.
  Who knows. Without any hardware tests is not easy to know which device is malfunctioning

• Re: Satellite Pro 6000 - will not be from hibernation

  I allowed my Sat Pro 6000 to run out of battery at the weekend so I was working on it and it went into hibernation, now I can't get the screen to wake up again. When I Plug and switch on the power led lights up, but the driven system is not. If I leave the power for about 10 minutes, the fan turns on and then turns off again.

  I tried to disconnect the battery cable and the power and left these disconnected from the day to the next, but this did not help. I removed the hard drive and tried in another 6000 and it works fine.

  Everyone knows about this problem?

  Hello

  It seems more like a hardware problem as a problem of Hibernate (software).
  I think there is something wrong with the power of electronic power supply on the motherboard and so the machine doesn't wake up or start impossible.

  I think it will be not easy to fix this problem yourself.
  Therefore an ASP help would be needed I put t see any other possibility.

  Best regards

• Problem sending mail to mac but don't receive not.

  My yahoo account was working fine for send and receive.  Then I had problems sending.  He would ask for a password.

  I have reset my password to check that there are no inaccuracies.  No help.

  I deleted the account and now I have some questions add it again.  Says: cannot verify the password and account name.

  I'm out of ideas.  It's for my macbook air.

  My iPhone can access that account.

  Try going to system preferences/Internet accounts. and change the password. If this does not work, try to delete the account.

  Troubleshooting post - Yosemite

  Address postal (Yosemite): If you are unable to send messages

  Post not send or receive messages after updating to OS X

• Satellite Pro 6000 does not start

  I have a 6000 Pro satellite, which does more boot. In recent years, he was skittish to get initially, I found exercising pressure on the right of the mouse would normally it starts in life.

  A few months ago, it got to the point where if I released the pressure it immediately off himself. Now I can't start at all, even when the application of pressure.

  When I plug the power supply in the power turns on and the battery light turns orange. If I just press the button start there is a short burst of blinkers and lights that all out. Then the power light flashes orange. This continues after removing the power cable. I need to take out the battery to stop the electric orange flashing.

  If I try to start the laptop while applying pressure with the thumb to the right of the mouse looks like it's working as the hard drive light and sounds of disk as it turns. Unfortunately, that's how.

  Research on the symptoms, that looks like it's a case of the fault of card mother feared the 6000 series is infamous for. I not mistaken, and is there something that can be done?

  Thank you very much

  Hello

  It looks like a hardware problem possibly there is something wrong with your surfboard because the power light flashes.
  This means that an error has been detected on the motherboard.

  Generally and laptop technician could read and can tell what's exactly wrong.
  But in most cases, a motherboard must be replaced if a motherboard error has been detected. :(

  Welcome them

• All-in-one Officejet J6400 Fax receive not always or not at all

  OfficeJet J6400, Vista.  Connected to the laptop via cable and wireless.  It is connected to the same phone number line, with the answering machine.  Settings seem correct and even when I had previous HP printer.  4 rings on the answering machine pickup and 6 rings for fax receive.  The fax does not receive.  Even if auto answer is on.  I am able to fax, manually. (have not tried otherwise)

  I have to figure out how to keep the auto answer on vs switch mode 'sleep' (of another post).  But sometimes it is not in Standby Mode and AutoA is off.   Regardless, machine does not seem to take faxes.  BUT, when you do the test with HPFaxme, it doesn't work. !

  And, when you use the HP Solution Center, all settings are made, and sometimes their fax Test does not work.

  Another question... in Fax configuration, which is PC modem in this question in quotes?  It's same as router? -"Are you using a PC modem (to access online services) on the same phone line as the device HP?   Answer is Yes or no.  Which is mine?

  I don't have DSL, and fax is on the same phone line. I have a DSL filter connected to the wire, of course.  Another wire goes from phone line in the wall (there is a separator) to the router.  This configuration refers to highest question?

  Is the best connection wireless or cable (printer for laptop)?

  Thank you!

  I'm back earlier than expected.  I never ran any patches of the HP link because another action (s) would have helped (which is recommended for another problem I had).

  So-

  I had the printer connected to the laptop via a USB connection and network.  (wire cable between the printer and the laptop and wireless through the printer setup)   Due to many problems to make the light stays on 'Auto response' (I posted on this separately in the recent past), I have the settings Fax arranged in a strange way to make this work.  So I didn't want to change these settings, what would be the recommended link for me to do.  For the problem of the 'auto response', I ended up connecting computer to the printer via the cable. And that probably contributed to this problem.

  I kept the two connections since and chose USB (OfficejetJ6480 copy1) wire as my setting of the printer preference in the settings box of the printer in Control Panel.  I think that even when I did the Wifeless-network connection preferably in the settings area of the printer in the Control Panel, the receiving fax machine or tests do not seem to work (even if it was some time ago and not tried recently).

  I think the duplicate connections was things confused.  The fax Test seemed to spend during a test of the printer settings button.  But he would not pass when the test has been made Fax Tools in the Solutions Center on computer. (And this I tested it today.)

  SO, I deleted the wireless network connection and the "device" (officejetJ6480) in the settings of the printer in the control panel.  I simply removed it.  I have left the "copy1 OfficejetJ6480" intact and continue the preference for the 'peripheral '.

  I have rebooted computer and run Fax Test of the printer and printer Solutions Center on computer configuration tool.  And they both passed Test.  Go figure.

  And also, the test of HPFaxMe works very well.    Thus, 3 tests have passed. !

  I hope this will be useful for someone even if it is confusion.

  But I'm sure that one of the hotfixes in the MissTeri link should help too.

  Thanks MissTeri!

• Invited guess receives not Gmail Cal event notification.

  Hi all, I tried to search for it and don't quite have a simple answer to my question. I have a gmail account and use it to create all my calendar events. When I add my wife as a «who» in the case of field of creation, his correct gmail email returns, but it does not receive an invitation to the calendar event. But when I send the same event to our yahoo email, the email invitation shows immediately. What is happening with this? Are there settings or something that changes necessary? Thank you

  Discovered only today, that when I create the calendar event and invite my wife when she was a gmail account, it automatically places the event in its calendar. (Without him making any type of notice).