0x000000F4 after loading screen error, does not start

Similar Questions

• Screen saver does not start on my Qosmio F20

  My Qosmio F20 screen saver does not start even after reaching the specified minutes 'wait '. I tried several ways to fix it, but to no avail. I really want the screen saver to appear.

  Hello

  Well, usually the common screensaver that are pre-installed on the operating system to work properly. I put t know what screensaver you use, but I guess that you have installed a 3rd party screensaver. In this case you should check these settings. For the most part a screensaver 3rd party has a parameters.

• my screen saver does not start. I select a screen saver, set the time, apply and nothing. This has happened before and corrected himself. Maybe one setting in another program? ___

  I select a screen saver, set the time, apply and nothing.  This has happened before and corrected himself.  Maybe one setting in another program? It's on a laptop.

  Hello jerrylumpe

  1. If you use an old mouse, try to clean it.

  2. you can have a running process in the background that keeps XP thinking that he is busy and so the screen standby does not start.
  Go to msconfig and uncheck everything you don't need, then see if the screensaver will kick in.

  Start/run and type
  Msconfig
  Ok

  Startup tab
  Keep the page open then click on the link below. It will tell you what are all the entries and see if you can disable them or not

  http://www.SysInfo.org/STARTUPINFO.html

  Read the key at the foot of the page, then click on "Here" at the top. Use the search box to check all your entries

  Try this too
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Line 51 left side. Click on "toggle".

  It could be that something is resetting the timer. For example, it does take much vibration to move the mouse a little, and which will reset the timer to zero. Something like that would be possible? Or a pet that walks on the keyboard?

• Screen saver does not start automatically

  original title; SCREEN SAVER DOES NOT START AUTOMATICALLY

  My screensaver stopped automatically to come if I use an excerpt it's turns on and will remain lit.  How can I fix or can uninstall and reinstall?

  It becomes a problem growing with the screen savers. The issue is background programs and services that are enough tasks that the computer never thinks that it becomes "inactive". Programs cannot do any real work, but are cycling through their operations individual enough to keep the computer "awake".

  Try to start your computer with a "clean boot", (see Microsoft Support articles below). If this resolves the issue and you definitely want your screen saver, you'll have to discern what substantive programs and services that you can live without being active all the time, and turn them off.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs interfere with your game or program
  http://support.Microsoft.com/kb/331796

  For what it's worth, the systems that I watched recently with this problem were 'smart phone' synchronization software recently installed and who is constantly looking for something to synchronize with regardles to know if they are connected to what whether or not. Change the start of these programs and services 'on demand' to 'always' solves the problem in these cases.

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• Hard drive error, does not start.

  Computer does not start. I get this failure code:
  Rw1xtw-7ax87b-mfpv6k-619403
  
  Can't find any information on this subject, can someone shed some light on this subject for me?

  Hello

  It decodes for hard drive error 305 or the hard drive has failed, you will need to get the replaced hard drive and reinstall the OS and have a Fresh start, note that all your data is saved on the hard drive will be lost.

• Black (blank) screen - Windows does not start

  When I start my vm I get only the black and white screen, windows will not start.  Help!

  Have you tried to turn off the virtual machine and start back up?

  When the merger is running, go to the Menu bar > VM > Power Off

  You may have the 'Option' key to change the option to "Shut Down Guest" to "Power Off"

  Once it is off, are you able to start up?

• Re: Satellite P100 - after update BIOS it does not start optical drive

  I have updated the BIOS to 4.70 in my P100 PSPAAE. After restarting, I expect about 10 minutes, but nothing has happened, after that the screen of the BIOS, the screen went black. I turned off the laptop only.

  I chose the option "start windows normally". Since (I assume) the laptop does not drive. Any, I have to start from there. Everything else works fine.

  It is because of the update of the BIOS, or something else could cause this problem? Any idea or help appreciated!

  Hello

  The optical drive is recognized from the BIOS?
  You can read the disc in Windows?

  Maybe you should load the default settings in the BIOS and try another bootable disk.

• MacBook Pro glued on the gray screen and does not start. Help, please!

  Hello

  My 13 "MacBook Pro (mid-2009), running Snow leopard (10.6.8), has finally given up and won't start.

  I tried to boot into SafeMode several times, but the loading bar does not move and the laptop just completely stops.

  I also tried to boot in single user mode with the command fsck - fy, but this results in the following:

  disk 0 s 2: I / 0 error

  Invalid node structure

  (4,35296)

  * The Macintosh HD volume could not be completely checked.

  / dev/rdiskOs2 (hfs)

  You leave with signal 8

  I guess that means that there is something wrong with the hard disk and some corrupt files?

  My problem is that I have no time machine backups, so I would like to know if it is possible to do something to get to the top and running.

  That, I do not have an external drive with my main important files and photos on a failure, so is it possible to completely erase the computer so I can sell it at least?

  I really need help on what I've been driving myself crazy trying to figure it out!

  I'm not all techniques with regard to the material. I tried doing research and have seen things, which suggests that I should reinstall the OS X, this would imply in the disks provided with the laptop when the power?

  Any advice greatly appreciated!

  Boot from the DVD and run the check/repair disk utility and repair permissions until you get no errors.  Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system.

  When you restart, use Setup Wizard to restore your data.

• Satellite A300 - Vista does not load, the computer does not start

  Satellite A300
  Model number: PSAGCA-02W010

  Vista won't load; have you tried to start repair; System Restore and boot in safe mode, none of them work. I get the error "error 0 x 80070570: the file or directory is corrupted and unreadable."

  I don't know what I did with my recovery CD; or if I even got one with my purchase (from Harvey Norman).

  Please tell us what can be done.

  Hello

  What you can try is to install Vista using disk HARD recovery option.
  How it works, you can read on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If it works all the data saved on the C partition will be deleted but the data saved on the D partition will always be there.

• Satellite A135 black screen and does not start

  I have a Satellite A135 with windows vista and I have not used in more than a year.
  I went to use it today and it turns on but the screen is blank. I can't even see not the bios.

  I tried the usual things, connect to a monitor, removed the chip of ram from the back and tried another one, I also tried power alternative only with no luck.

  All the ideas it might be.

  Thanks for the help

  Hello

  If the BIOS page does not appear, then it s a serious question.
  Seems that the motherboard is dead.

  In my opinion, a technician should check this section first, and perhaps you will need a new

  Motherboards are parties, then perhaps it s not an option for you

• Windows load with black screen and does not start after windows updates

  Original title: load windows normally screen will not continue

  I went to my computer tower and I chose to install updates when closing.  I went back later to re - turn on my computer and now it loads to the top of the black screen that gives you 5 options. safe mode, safe mode with networking safe mode command prompt, windows loads normally and finally to load windows from last known configuration that works.  Problem is that none of these options work.  they all return me to the same screen.  Help this laptop came preloaded with Win XP Media Center edition and I can't get back to work.  IM assuming I need a XP disk support center but I can't find them anywhere! HELP PLEASE SOMEONE!

  Hi Burton089,

  Your hypothesis is right. To resolve this problem, we need to repair your installation of Windows using the Windows XP disk. We recommend that you contact the manufacturer of the laptop to check if they have the Windows recovery disk.
  See perform a repair Installation
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BIOS rom checksum error does not start

  Compaq

  will not boot at all

  When I turn it on it automatically goes to a black screen that says:

  Award Bios BootBlock v1.0

  Copyright (c) 2000, price Software Inc.

  BIOS Rom checksum error

  keyboard err or no keyboard present

  IDE ATAPI device detection...

  Found CDROM tries to boot from the pass it...

  can anyone tell if this can be fixed if it can and you know I would appreciate it a lot

  Oh and I got a windows vista disc to see if it downloads it, but just on the same screen

  The "boot block" needs to load the rest of the BIOS of a memory chip. Since it doesn't, either the battery on the motherboard (a piece the size of a $0.25 coin silver) has failed, either the content of the memory chip cannot be read.

  Replacing the battery is fairly easy.
  First of all, notice the writing on the top of the battery.
  You will need to put the new battery into the socket,
  with similar writing facing face up into the socket.
  Look on the edge of this battery to a small 'finger' which holds the battery in its socket. Push this "finger" of the Center, and the battery must be able to be raised.
  Remove the accumulator at any computer store and get a replacement.
  Insert it, and then try again.

  If the problem persists, then either he must:
  * Replace the motherboard
  * replace this chip memory (which can be soldered on the motherboard at all times).
  * replace the computer, taking the disc drive of the old computer and its connection as a 'slave' the drive in the new computer.
  * take your computer to an expert technician.

  The attempt to boot from the CDROM is a process "emergency", to use when you have a specially created CD disc that contains a copy of the software to load into the memory of the BIOS chip. It is not a 'normal' start (to load the Vista disc).

• Qosmio G40 - black screen and does not start

  A bit of water on my laptop... (bought in 2007, guaranteed on)
  I did not cut power at the time because it did not work properly...

  But, the next morning.
  Start with a black screen, fan is too much work and I have a beep.
  An and after a continuous short beep...

  I opened it and dry all (air cold & mild)... paper to remove moisture.

  but screen remains black, a beep and the fan not working too.

  Please help... What can I do?

  Hey,.

  It seems that water damged your laptop or at least some parts. In the worst cases, you need a lot of new pieces of equipment, but I don't think that an authorized service provider can help you diagnose this problem.

  On the Toshiba site, you can search for them:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Contact them and ask for help. They will help you as much as possible. :)

• Satellite L655D crashes on Windows startup screen and does not start

  Hi, I hope someone can help me.

  Portable Satellite L655D age of 18 months of my daughter began to hang on the black 'starting windows' screen, when it stays until it turns off after several minutes. I didn't spend this stage for several days, and the machine seems completely unusable.

  I then turn off by pressing the power button for a few seconds, I can then select F12 with the option to start in safe mode, but the laptop never makes it in safemode, it real just data on a screen black for a few seconds and then it crashes with the message "Please wait".

  Others that look, I'm not able to go beyond these screens.

  Any help would be appreciated.

  Thanks, Darren

  Hello

  Did you create a recovery disk?
  In this case, you could use this drive in order to reinstall windows on the laptop system.

  Another possibility is to drive HARD recovery. Press the power button, F8 and choose fix my computer. Now choose HARD drive recovery.

  I hope that you can do this

• Windows recovery error, does not start in windows 7

  Description of the problem:

  "Windows error recovery" appears during the implementation with 2 options-

  (1) starting repair (recommended)

  (2) start Windows normally

  I can't access my desktop.

  • If I choose 'Launch Startup Repair', it goes to the screen next where I see "Windows is loading files...". ». He never goes beyond this screen.
  • If I choose 'Start normally', I never go beyond "starting Windows."

  I ran the diagnostics (Pre Boot system assessment build 4118) and got far: hard drive 0 - self test unsuccessful. Error code 2000-0142 status 79

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner