11.1.2 Essbase config: cannot choose "connect to a previously configured SS db.

Similar Questions

• Satellite P200 - cannot choose WLAN hotspots

  My satellite P200 cannot choose networks wireless hotspots. It came with pre-installed Vista which I've upgraded to Windows 7 proffessional.

  What drivers do I need to fix this? Download links?

  Hi Mike,.

  This only happens on sensitive areas or on your router at home too?

  However, you can download drivers WLAN here:
  http://APS2.toshiba-tro.de/WLAN/

• your call cannot be connected please check your phone settings

  I can't make a call

  Whenever I tried to dial a number, even if it's fresh, to the toll free number or carrier Customer Support number.

  He always said, your call cannot be connected please check your phone settings.

  Try force reboot:

  http://support.Apple.com/en-us/HT201559

  If no joy, then talk to your cell provider or obtain a new SIM card

• Why doesn't my computer series sony vaio y cannot detect / connects to a wireless connection

  Why doesn't my computer series sony vaio y cannot detect / connects to a wireless connection. only through connection cable/usb... Please help me... Thank you...

  Hi JaqD,
  to go with that said Brian, more in detail the best options, we can give you.
  In the meantime, here are some generic troubleshooting steps:
  http://support.Microsoft.com/kb/313242

• WIFI disabled on windows vista and cannot wireless connect to the net

  WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

  All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

  In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

  Is there a way to FIX?

  http://support.Microsoft.com/kb/932520

  Read the above re ignore this error message.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  Please see this link in the topic "successful."

  Creative cloud using Enterprise | Applications and updates

  You can use managed delivery of applications for the following:

  • If you need to exercise strict control over the applications installed on client computers.
  • If end-users have administrator privileges on the computer.
  • To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
  • If there is no Internet access on client computers.

• The SQL * PLUS cannot be connected

  The SQL * PLUS cannot be connected.
  
  When I try to connect to sqlplus, I get the following error message: ORA-12560: TNS:protocol adapter error
  I have trouble shoot in accordance with what follows the steps, but have not found any problems:

  C:\Documents and Settings\Administrator>sqlplus / as sysdba
  
  SQL*Plus: Release 11.1.0.6.0 - Production on Tue Apr 27 09:45:51 2010
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  ERROR:
  ORA-12560: TNS:protocol adapter error
  
  
  Enter user-name:
  
  C:\Documents and Settings\Administrator>lsnrctl status
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 27-APR-2010 09:37:56
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production
  Start Date                27-APR-2010 09:35:08
  Uptime                    0 days 0 hr. 2 min. 48 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   F:\app\oracle\product\11.1.0\db_1\network\admin\listener.ora
  Listener Log File         f:\app\oracle\diag\tnslsnr\HOST1\listener\alert\log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=HOST1)(PORT=1521)))
  Services Summary...
  Service "db1" has 1 instance(s).
    Instance "db1", status UNKNOWN, has 1 handler(s) for this service...
  The command completed successfully
  
  C:\Documents and Settings\Administrator>tnsping db1
  
  TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 27-APR-2010 09:38:46
  
  Copyright (c) 1997, 2007, Oracle.  All rights reserved.
  
  Used parameter files:
  F:\app\oracle\product\11.1.0\db_1\network\admin\sqlnet.ora
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICA
  TED) (SERVICE_NAME = db1)))
  OK (500 msec)
  
  
  C:\Documents and Settings\Administrator>echo %oracle_sid%
  db1

  The OracleServiceDB1 service and the OracleOraDb11g_home1TNSListener service has already begun.

  If the original instance cannot be deleted, you can try to create a new instance of the same name.

  oradim -new -sid db1
  

• MAXL essbase with port server connection

  Hello
  If I use the maxl shows
  to connect to the essbase Server
  login password admin on "essbaseserver.com";
  It will be default port 1423.
  
  Does anyone know the syntax for port 1424?
  would it be
  login password admin on "essbaseserver.com:1424";

  Hello

  Specify the current hostName:agentPort when you log Essbase. For example, connection user password on "localhost:1424";

  I hope that helps!

  Neha

• internal hosts cannot access the internet w / L2L configured tunnel

  The internal hosts behind the ASA cannot access the internet with a configured tunnel to L2L. The L2L tunnel is mounted and passing traffic correctly. However, the internal host cannot access the internet through the ASA. I think I have my NAT watered somewhere. I can't even a host statically mapped to the internet. It might be because I'm used to having a WAN IP to the external interface which differs by the CIDR block assigned by the ISP. In this case, it's all together, with the ASA outside interface occupying the first available address.

  We have been assigned a CIDR range x.x.x.64/28. x.x.x.65 is my front door and my first usable est.68, by the PSI (I guess what they utilisent.66 et.67 for internal use). External interface of the ASA est.68 and I'm trying to get NAT others. I'm Polo all DHCP clients internal and have some static entries as well. Below is the relevant NAT config. Yet once, all traffic passes above the tunnel properly, but not from inside to outside. If more information is needed, please advise.

  interface outside

  IP address x.x.x.68 255.255.255.240

  NAT-control

  Global x.x.x.69 - x.x.x.77 2 (outdoor)

  Global 1 x.x.x.78 (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 10.10.10.0 255.255.255.0

  public static x.x.x.69 (inside, outside) STATIC_NAT_EXAMPLE netmask 255.255.255.255

  internal access-group interface inside

  Route outside 0.0.0.0 0.0.0.0 x.x.x.65 1

  internal to the 10.10.10.0 ip access list allow 255.255.255.0 any

  ! Remote LAN is 192.168.10.0/24

  access-list sheep extended ip 10.10.10.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

  Can you post a "show sysopt run?

  Try this command to enable proxy arp.

  No outside sysopt noproxyarp

• I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

  I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

  Windows: Tools > Options > advanced > network > settings
  OSX: Firefox > Preferences > advanced > network > settings
  Linux: edition > Preferences > advanced > network > settings
  Set your settings to connect to the 'No proxy', if you are not using a proxy.

  Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

• The SQL server system configuration checker cannot be executed due to WMI configuration on the computer

  The SQL server system configuration checker cannot be executed due to WMI configuration on the computer

   
  Toshiba-User Error: 2147749896 (0 x 80041008)
   
  I am trying to load the software for insurance. I got the above message.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  
  The SQL Server installation & set program to update Forum

  http://social.msdn.Microsoft.com/forums/en/sqlsetupandupgrade/thread/3f313abe-8826-4d76-8F04-611ebd4d0141

• Cannot establish connection/local authorization on 6500's

  I have a need to allow a small group of level-15 users temporary access to several 6500

  switches (12.2 - 33 SXJ2 code execution), but do not want to provide the password secret enable that is used on the

  the rest of the network (over 1200 devices).  I tried to eliminate the AAA using the command "no aaa new-model", but I was told that I could not remove aaa while there are active sessions, and 'local connection' appeared more as an option for the vty lines.  So, I created a database of local user, called the 'support' that I used to replace the entry 'group' in sections of the authentication and authorization of our AAA config and connection on vty 0 4.

  [The username is given a privilege level of 15 with an individual password for authentication.  (e.g. username privilege 15 password 0 xxxxx jsmith)]

  I changed our AAA configuration to support the local login, but could not establish a "mode" (i.e. the prompt #) with any account.  I have

  can log on locally, but only to a normal "user mode" (i.e. > prompt).

  Here is the config current, modified, and sanitized for our AAA sections and line vty 0 4.  Please tell me what needs

  for the stay, and what to go.  Thank you!

  P.S.: for reasons of security, we want to track individual activity, so need the accounting AAA part to stay.

  AAA new-model
  AAA server Ganymede group + XXXXXX
  Server xxx.xxx.xxx.xxx
  Server xxx.xxx.xxx.xxx
  !
  enable AAA authentication login default group XXXXXX
  the AAA authentication enable default
  default AAA authorization exec XXXXXX group no
  AAA authorization commands 15 default authenticated if
  AAA authorization network default group XXXXXX no
  authorization AAA MLPPP-PPP network no
  MLPPP AAA authorization network no
  AAA accounting exec by default start-stop group XXXXXX
  AAA accounting command 15 default start-stop group XXXXXX
  AAA accounting network default start-stop group XXXXXX
  AAA accounting connection by default start-stop group XXXXXX
  AAA accounting system by default start-stop group XXXXXX
  !
  line vty 0 4
  access-class 75
  exec-timeout 15 0
  privilege level 0
  password 7 xxxxxxxxxxxxxxxxxxx
  entry ssh transport

  I'll have to probably more information until I can provide more help but since I see in the snip-it, you have configured aaa and your AAA server is a GANYMEDE server +. If this is the case you should keep in mind the following:

  1. If the authentication/authorization commands refer to the GANYMEDE group + then you will need to add a 'local' at the end of the command. This will allow local accounts to use when the AAA server is down/unavailable

  2. keep in mind that local users will ONLY be used when the AAA server is down/unavailable. You cannot have a mixture of the two

  Question, since you have a GANYMEDE server +, why don't you just create temporary accounts directly on the server GANYMEDE + accounts vs local? You can get very granular like that and don't allow some commands on some devices, during a certain time of day, etc...

  I hope this helps and thank you for the rating!

• Cannot change connection settings

  Firefox 34.0 (Waterfox actually) after the new update doesn't let me save the connection settings. The radio of the proxy used to be on no proxy; I deleted prefs.js and now it is stuck on the proxy for the use system settings. Now the no proxy for field is filled for localhost and 127.0.0.1 and I cannot click OK if I enter the manual configuration of the proxy. Safe mode does not work.

  solved: https://www.waterfoxproject.org/fullnews/74.html

• Cannot choose to update its time of 7.7.3 7.7.7

  Hello!

  I sincerely hope that's no stupid question...

  I simply can't update my Capsulte time: I opened the airport serviceprogram, see my time its and voila! There is a red "1!" right on behalf of my TC blinking in orange. When I click on the Red "1", it shows a popup window small namce, one IP, seiral number and the status field there is the status "making available". So far so good. I click on the 'update available' (sorry, it's translated from the German, but to the text "firmware update" available in English original version) and another pop-up menu shows the options "ignore" and "install update".

  Can I choose 'ignore' which is highlighted when a mouse on it BUT I can NOT CHOOSE "install update". It is grayed out.

  Someone at ideas what to do? A reboot didn't help, waiting has not helped and I don't want to ignore the update.

  Thank you very much in advance,

  Best regards

  Michael

  How the TC is connected to the internet? That is to say it is connected to another router? Is the TC in bridge mode or router?

  What model is precisely the TC?

  The upgrade can be done manually... but I need details to help you.

  If the TC is the height, there is only one model... Just so say much.

  If it is flat, I need to know what gen.

  Either return the TC and get me the model number A1xxx on the base... or double-click the icon (option click also work) to get the summary page... the model is listed on top.

  Then

  

• ENVY 750-197c: still cannot successfully connect to wifi?

  Hello! I received my new desktop PC (a 750-197 c ENVY) probably about two weeks ago. Since then, I was not able to connect to wifi. The office came with Win 10 which I really didn't yet, so I went down to Win 8. After not being is not able to connect to wifi, I returned to win 10. I could not even connect. The connection attempt process seemed worst in 10 to win, because I have never managed to connect anytime, unlike Win 8 where I could connect perhaps at some super random time briefly for a minute I did my research and checked in high and low for the solutions to the problem. Convenience stores would often come with nothing, or some problems such as:

  • "'one or more network protocols are missing on this computer ' (only on 10 to win)"
  • "default gateway is not available" (On the two 10 Win & Win 8)

  After trying everything, including the netsh commands and update drivers, I was still not able to connect so I bought an external USB (Belkin N300) adapter to test things in case there was a problem with my computer built into the adapter (Intel(r) Dual Band Wireless-AC 3165). I also had to come back to Win 8 given that the new adapter is not compatible with Win 10. I noticed a difference after the installation of the USB adapter - wifi will be done 'connect' now and show 5 bars of signal strength. However, the connection is still not usable. I'll every few minutes or so get a yellow triangle on the network icon and after a repair I will no more no results or one of:

  • "default gateway is not available" (Which Windows will fix in the troubleshooter, but don't always give no internet)
  • "windows cannot communicate with the device or resource (primary DNS server).
  • "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  Other times there a yellow triangle but once again, still not usable. I feel at this stage, there is a problem somewhere with perhaps the computer settings? Connect my internet real and router works fine. My other devices connect correctly, including my laptop in the same room with this desktop computer. I tried to reset my router, but it does not solve the problem. I checked that the adapter is configured to obtain the address IP and DNS server automatically, which is. I also tried the netsh commands

  Spoiler (Highlight to read)

  ipconfig/release
  ipconfig/all
  ipconfig/flushdns
  ipconfig / renew
  
  netsh int ip set dns
  netsh winsock reset

  /releaseipconfig ipconfig/all command /flushdns ipconfig ipconfig / renew netsh int ip set dns netsh winsock reset

  still nothing. I really need help to fix this and would be grateful for any help!

  Hi there @KianaLofton,

  Welcome to the Forums of HP Support!  I understand that, after the decommissioning of your system of Windows 8, you have had problems with the WiFi connection and probably the drivers.  I'm happy to help you with this.

  Looking at your previous posts, I feel that Wifi was working before the downgrade of the OS.  Did you by chance do plant a set of recovery discs for your system before moving on to Windows 8?  If this isn't the case, then you want to maybe get a game to the reference level of the system to the factory installation and see if it works again, then we can know that the issue is all about software and drivers, and there isn't an underlying hardware problem.  Computers HP - get HP recovery disks or HP USB recovery disc

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.