13 - v021nr spectrum HP: HP Elite Usb C Dock T3V74AA doesn't charge spectrum HP

Similar Questions

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.

• X 2 elite 1012 G1: HP Elite Thunderbolt 3 65W USB - C docking station does not not on Elite X 2 1012 G1

  Hello

  I just got the USB docking station - C HP Elite Thunderbolt 3 65W.

  I plugged in and my Elite X 2 1012 G1 fresh, but that's all. No ports do not work. The monitor is not recognized or the other.

  If I plug in my phone via USB, it loads, but not recognize it as a storage device.

  I have looked everywhere and can not find drivers that will solve this problem.

  I have:

  -Shot lightning software installed and running, but still without success.

  -Installed and running "Intel Thunderbolt Firmware Update Utility", but get an error that there is no controller driver.

  Help, please.

  PS. The machine was reimagee with an SOE enterprise. So I don't know if I am missing drivers.

  OK problem is finally resolved.

  Rebuilt everything. Everything is OK now.

  Workstation.

  Lightning blow job.

  Happy customer!

• Elite x 3 Dock desktop: desktop dock use lan

  Just a quick question: the x 3 uses the connection to the local network of the dock office. It seems to me that it does not work. There seems to be no LAN settings in Windows Mobile 10 when it is docked.

  If this isn't the case, he plans to use the LAN DeskDock x 3 connectivity in the near future?

  Thank you

  Yes it works.

  I tried on my HP Elite x 3 by turning off cell phones and WiFi and connect an ethernet cable. For example, I could update my Garmin maps, which was a 3 GB download. (Note that this is super fast like wired is generally much faster than the wireless.)

  Also by email, browser WhatsApp and Edge worked as usual.

  There is actually no settings to configure, but most networks are DHCP / autoconfig anyway.

• HP DeskJet 400 with parallel/USB adapter and Ubuntu doesn't print correctly

  as in the topic, then print at the start of the printer green LEDs start flashing when it start to print:

  -Sometimes, the printer turns off

  -Sometimes, the printer starts to print, but at some point, it seems random, he stops and turns off

  -rarely printing is completed successfully.

  Anyone experienced this?

  The parallel/usb converter worked correctly with windows for 2-3 years.

  Thanks to all who can help me.

  Hi ottavop,

  You will need to go the link below to get assistance for your operating system to Linux/Ubuntu.

  http://hplipopensource.com/hplip-Web/support.html

• All USB ports not working doesn't no causing of mouse and keyboard doesn't work either (considered the source of the problem). Need help fixing without using the mouse or the keyboard.

  None of my usb ports work, and I can't get my mouse and keyboard to respond.  The computer will start, but none of the usb ports work, and I don't have the use of a mouse or a keyboard works through all the patches.  Help!

  I have PS/2 ports, but no mouse PS/2 or a keyboard... did not have those last few decades and don't know anyone who has these features more

  $6.36 (free delivery if you have Amazon Prime, otherwise on $11 including shipping): http://www.amazon.com/V7-Standard-PS-Keyboard-KC0A2-4N6P/dp/B007R9YV0C/ref=sr_1_1?ie=UTF8&qid=1372529682&sr=8-1&keywords=ps%2F2+keyboard

  during boot, or perhaps in Safe Mode

  Assuming that your keyboard works during boot (and it should; trying to tap F8 to access Advanced Boot Options Menu), probably the simplest method would be to make a Hiren Boot CD, boot from it and use one of the many included tools.  I have not experienced with your particular situation, so I can not tell you what tools will be or will work for you, but my guess is that USBDeView might work.

  Description: http://www.hiren.info/pages/bootcd

  Download and burn (copied from ElderL):

  Download the Hiren ISO here (download important enough but worth it).

  http://www.hirensbootcd.org/download/

  I like to use ImgBurn to create a bootable ISO CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask Toolbar (ever).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  Thanks for all the help. Seems that there is no easy 'reset' for bad hardware configurations.

  However, I dug to the bottom of my Lac 'tech' and found a USB-to-PS/2 adapter, which allowed me to use the USB mouse into the PS/2 port and reactivate my USB ports.

  All is well now.

  Thank you all for your answers!

  Kind regards!

• Camcorder JVC Windows says vista and XP ' device unrecognized try another usb port if it doesn't have a replacement device.

  Model of camcorder JVC GZ-MG50AA

  computors on XP sp3 and Vista laptop. Both give the same message when the camera connected to download videos and pictures.

  Hi Davo1957,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to connect the device to a different USB port and check if the problem persists.

  Method 2: There are chances that the USB cable may be defective. You can check the device connection through different threads.

  Method 3: You can run the Microsoft Fixit from the following link and check if the problem persists.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 4: You can follow the steps in the Microsoft Knowledge Base article and check.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

   

  Method 5: Install the drivers updated and chipset for the device and check the results. You can see the article mentioned for more information below:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Let us know if that helps.

• my USB not conectec driver doesn't instal no eror show usb device not shown usb me

  My usb device does not show eror conectected lock me eror see the

  Hello

  1. What is the accurate and complete error that you receive when you connect the USB device to the computer?

  2. what USB device you have connected to the computer?

  3. are you having problems with USB devices or specific USB device?

  4 you did changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• Dell USB - 3 docking station (D3100) video limits?

  I bought my second Dell P2415Q monitor, bi-ecrans support and a docking station.  After I had it put in place and works, I noticed that the resolution on the monitors was maxed out at 2048 x 1152.  Each monitor supports the resolution of 3840 x 2160 and QHD + video in my XPS - 13 3200 x 1800 card.  After some research, I discovered this page 3 of manual docking station has a little graphic that shows that it is the best you can get with a dual monitor connected to the docking via HDMI.  I am disgusted!  What causes this limitation?

  I agree that the sales site should have stated this limitation of the manufacturer. You should be able to set up like this =

  D3100 DP on--> CDM DP cable--> #1 P2415Q CDM in (STD primary, page 33 and 34) = 3840 x 2160 30 Hz

  D3100 out HDMI--> HDMI to HDMI Cable--> 2 # P2415Q in HDMI = 2560 x 1440-50 Hz

• X 2 elite 1012: how I drive 2 external monitors to my Elite X 2 1012

  I have the doc of USB, but can not do the work monitors external disc 2 - help? !!

  Thank you!

  Hello JFD84,

  What doc do you have? Is this one of them?

  HP USB Travel Dock T0K29AA C

  HP Elite USB - C travel Dock T3V74AA

  Only the Elite version is a User Guide that I can find.

  Accordingly, he uses a Display Link software to use external monitors or double.

  Go to the bottom of page 6 learn about Setup and configuration of an external monitor.

  HP Elite USB - C Docking Station User Guide - view

  Here is the link for the HP USB Dock DisplayLink driver. I guess an adapter might use this driver, but as I said, there is no documentation for the non-elite version explaining this. So, I'll have to take a guess.

  Drivers & software - HP Support Center.

• Spectrum 13 2016 HP: CompatibleHi Docking Station

  Hello

  I need to know what dock is compatible for my spectrum of hp. If zbook dock is compatible for my crush 3 and USB - c?

  I need a dock that can do two output screen.

  is love at first sight dell 3 compatible dock?

  Cannot use the Zbook dock with spectrum Zbook dock has an extra power PIN for which there is no place to plug into the spectrum. I have two devices, so this comes from first-hand experience. HP USB - C docks like the dock of the elite have problems and I would go with a third party dock USB - C. I have not however tried an output dock dual display on my spectrum. Theoretically, each USB - C port can drive up to 4 x 4 K UHD monitors I've seen written, but not running.

  You can try this:

  https://www.Amazon.com/plugable-Thunderbolt-DisplayPort-supports-4096x2160/DP/B01F81EIBC/ref=sr_1_1?ie=UTF8 & qid = 1468876947 & SR = 8-1 & Keywords = USB - C + Dual+ DisplayPort + adapt

• After the upgrade to USB 3 Hub Ethernet Sierra is no longer works

  On my mid-2015 15 "MBP, I have a Sitecom CN - 340 USB 3 Docking station. Apart from all kinds of outputs, it has an Ethernet port, which I've been using for the last 6 months without any problems... until the update for Sierra. Since then, the report of control center that the cable is not connected. I am now connected via Thunderbolt. Has anyone noticed this too? And then knows how to fix? The latest drivers are February 2016.

  Kind regards

  Oliver Holmes

  It turns out that the problem is so the driver being old-fashioned. The chipset is the AX88179 and the manufacturer provides its own drivers here: http://www.asix.com.tw/download.php?sub=driverdetail & PItemID = 131

  So, all is well again.

  See you soon,.

  Oliver Holmes

• It is admissible and compatible to recharge an iPad 12.9 "Pro of a 2. portable usb plugs block 1a (as MAXOAK 36, 000mAh)?

  I don't know if there are any disadvantages or warnings to harming the internal composition of the iPad to 12.9 "Pro if different USB ports are used (for example by using a 1 2 a USB).

  Anyone know if the iPad Pro has a detection of the type of output USB mode? and if so, to adapt to the USB output without injury or damage or void of warranty etc..

  In short, what is the type/kind of USB (#. #A) 'safe' permit to charge the iPad Pro... in other words, are there consequences to recharge the iPad Pro from any old USB port or are we limited to the macbook pro (seems to work fine) and the wall socket, charge adapter this stock came with the iPad Pro?

  Any response is greatly appreciated! I plan also to go to my Apple store closest to ask in person and, possibly, your comments permitting the free opportunity to life at the College...

  Thanks to everyone and anyone!

  Best regards

  -GKL

  iOS devices regulate the charging process internally. A charger using old Apple should not harm him, but it may require too slowly. I often have reload my iPhone with my charger for the iPad, but the inverse would be too long. I would use the charger supplied with your pro.

• 3 USB sockets do not work on Satellite click Pro P30W-2B

  When I connect to the plugs in the USB 3 docking station the PC does not detect the device.
  When I connect to the USB2 plug in for this Tablet?

  Hello

  Have what external USB you tried to connect?

  The Tablet supports port USB 2.0 x 1.
  The keyboard dock supports 2 x USB 3.0 ports that also support sleep & Charge mode.
  Try disabling the load & asleep in the BIOS and then connect the USB device to a USB 3.0 ports...

  Your comments would be appreciated.

• Still 2 WT8 - B USB do not work

  Hello.
  In my Encore 2 WT8 - B with Windows 8.1 wit Bing, the usb port is capable fo only charge the battery.

  I tried to plug the usb pen drive (with usb-adapter usb-mini) ora olso a HARD but disc does not.

  Someone know why?
  Thanks, Andrea

  Problem solved: I there a cable of the CTA.
  Whit this cable everything is ok: duplicator usb, USB drive, keyboard, mouse...

  Hello
  Andrea