15 amps with 16amp PDU cord

Similar Questions

• BlackBerry smartphones want to listen to music from my BB to my amp with USB

  What happens if I want music reading on something else that a computer as plug the USB into my amp? Or even if I want to listen to music from my BB to my amp with USB? What I think really should be possible!

  You're right, USB is not the answer, but there is not only the wrong questions of wrong answers!
  What I needed was a fono-jack(don't know proper intl name, but its called that in the Scandics).
  But thanks anyway, much appreciated!

• GPU amp with Z68 + i7 2600?

  I had a sudden brainwave.

  Reflection on the Z68 chipset and an i7 2600, I was watching a card ASUS with LucidLogix Virtu (Universal Switchable Graphics)® feature. Then I got to thinking, it would be possible to have the 5 ESXi server itself take the 2600's internal graphics and my GTX 580 have run inside a virtual machine, amp (using the vt - d technology support)? If so, I could build a gaming platform devilishly VM!

  I know that a server ESXi is not really designed for the game; but in my case, that would mean I could remove my main rig, simply create an ESXi server and still be able to play the occasional game.

  It is possible - take a look at this thread to see what worked and what didn't - http://communities.vmware.com/message/1668788.

• problems of ultra maxx charges with a power cord

  Sometimes my Maxx will begin charging when I plug, sometimes it requires a reboot before it will start to load. I tried a new power cord from Verizon and the results are the same. I got the phone because he is out, and the problem started a couple of weeks. Someone can offer some advice or should I go to? Any suggestion would be appreciated.

  By a new power cord do you mean just the cord or adapter as well? If only the power cord that I suggest that you try using a different card first thus.

  Also make sure you have the USB plug inserted at bottom. You don't want to lift or turn it on, but push to make sure that it is firmly in place.

  If this continues to happen that I would propose a factory data reset. Who will rule on software issues. If the FDR works advertising repair/replacement would be the next logical step. HTH

• My Acer Aspire R14 does not start with the cord of the charger plugged in with the battery connected to

  A few weeks ago, my laptop Acer Aspire R14 went totally blank. When I unplugged the power cord, it started right to the top, but at the moment where I plugged the power cord back inside would be closed. The battery dies quickly in this way, because it would not charge. I removed the battery then it started upward with the power cord. I thought it must be the battery, so I installed a new battery. which is not to change the problem.

  So, I ordered a new motherboard and after a few weeks, I received it today, installed, and I have always the same thing. It works well with the power cord plugged in until the battery is disconnected. But at the time wherever I connect the battery, everything stops, not to be revived unless I disconnect the battery.

  I need help! What could be the problem?

  Glad I could help.

• OfficeJet 8600 more: power cord with adapter for Officejet 8600 set more lost

  Lost my power cord complete with adapter. Can I use a power cord generic Office Depot, without the 'square' on the wire? Or is it necessary to have the power cord with the adapter, as it was originally? It will damage my 8600 more to use a power cord without this "square" in the annex on my more than 8600 all-in-One? Thank you.

  Hello @DB2,

  I understand that you have lost the power cord for your HP Officejet Pro 8600 more e-all-in-one printer and you want to replace it. I would like to help you to solve this problem today. The HP Officejet 8600 more only comes with a power cord. The adapter is built into the back of your printer. You have to unscrew the back of your machine in order to access it. Therefore, if you buy a spare power cord it should work perfectly for you.

  The power requirements for this machine are:

  • Power: Universal power adapter (external)
  • Power consumption: Input voltage: 100 to 240 VAC (± 10%), 50/60 Hz (± 3 Hz)

  Output voltage: + 32V / + 12V to 1095 mA/170 my

  • Consumption: 30 watt impression (project Quick Mode); 32 watts copy (Fast draft Mode)

  -Source

  You can buy a power cable of the store to use with your printer, or you can contact our Technical Support queue and buy the correct power cord for your printer by phone.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if this information solves your problem. Thanks for joining the Forums from HP Support. I look forward to hear from you!

• PALM TX will turn on and work with power cable plugged but not when disconnected?

  Hello all-

  I have a PALM TX, who bought in 2005. It worked fine but I changed my position and my last job stop supporting. That being said, I can use now and have recently it turned on and loaded schedule, etc. However, it does work when I plugged in the power cord. It works very well with the connection, no problems. That said, once disconnected from the power source it not light?

  I finished the soft reset several times. With reconnected to the power cord it works fine. However, it still not work with the power cord?

  I was reading online in various forums and it seems like it might be my power button?

  Does anyone else have this problem?

  Any ideas or help would be greatly appreciated that now I can use and really want to use it to its full capacity.

  Thank you!

  Joe

  The connections of welding of switch on the motherboard have been a little weak on the TX line.

  It seems to me that the battery is dead.  The TX can also turn on by pressing the front buttons.  Try to press one of them and see if it lights.

  There are several online sites for repair and PDA batteries.  TX peut battery be user servicable, although it is a little intimidating for a novice.  If you Google 'Palm TX battery replacement', many hits will occur as well as how to videos!

  WyreNut

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• Lost sound with PC Media Center HP

  My office is a HP Media Center m1050y (PJ697AV-ABA) CTO of desktop PC. It runs Windows XP. I have a card Creative SB Audigy 2 ZS Audio sound [E480]. The sound is set by default to this card.

  One day, I listen and watch a video stream on the Internet and the next day I had no sound. I booted up and I don't think I had sound at first, and then I removed my advertising program. I went to point restaurant the day before but that does not restore the sound.

  I reinstalled the drivers and looked at the BIOS splash screen and have tried automatic, enabled and disabled.

  I worked through the support HP on the list page:

  http://support.HP.com/us-en/document/bph07154

  Still no sound. The connections are good.

  I tried to run the diagnostics of creative media for the hardware and the software again. Previously, it would be error. It was a mistake but I pushed the and everything happened. I ran it again and everything.

  The speaker system is supplied with the PC. It's a Klipsch loudspeakers and a subwoofer. I had checked the fuse on the box and it was ok. The computer goes into the right speaker which has a small green light. The resisdes pre - amp with the subwoofer. I know power going to the subwoofer because it was hot, and the fuse is ok. Also the green light was carried out.

  I could hear also some clicks and pops in time outside so it appeared to work.

  Pretext to check hypotheses twice, I pulled an old speaker system and hung. I had sound.

  My guess is that the missed preamplifier that has been powered speakers. Also the green light did not shine. What I saw, that was my office of light reflecting on the little green bulb.

  Thanks for your help.

• HP3521: HPLIP install not on Linux Mint 18 with XFCE

  I try to install HPLIP on a laptop Dell Latitude D510 with Linux MInt 18 with freshly installed XFCE.  Towards the end of the HPLIP installation, I get the following error message:

  Printer driver HP HPLIP installs not entirely:

  RE-CHECKING DEPENDENCIES
  ————————
  error: a required dependency "libtool (libtool - library support services building)" is still missing.
  error: Setup cannot continue without this dependence.
  error: Please manually install this dependency and re-run this installer.

  How 'manually install' this dependence and continue installing HPLIP?  The printer will print with the usb cord but I can't print or scan wireless. The hp-setup 192.168.1.117 command no longer works...

  Thank you.

  apt - get install libtool-bin

  It worked.  HPLIP now installs fine.  The problem is perhaps hplip - 3.16.7.run.  You can check...

• Using Apple TV with Ethernet

  I have an Apple TV in my class. The Apple TV is connected to a projector with an HDMI cable. I have an iPad and connect to the Apple TV to show my students the Keynote presentations and video.

  The Apple TV is connected to the school WiFi network. School WiFi network is very "buggy" at random times during the day.

  Often, in the middle of a class, the connection of the antenna with my iPad will go down and the display will return to the main screen of the Apple TV. It may take several minutes to get the iPad to reconnect to your Apple TV via Airplay. It's boring.

  The Apple TV is not far from an ethernet port, and I have a long Ethernet cord. If I connect the Apple TV to the school with the Ethernet cord network, this will improve the performance of the Apple TV?

  Very probably.

  Ethernet is significantly less prone to problems that might encounter with wifi. However don't forget that half of your set up will depend on the wifi.

• Requirements replissé or satellite 1800 with a car charger

  Hi I have a 1800-514 model, Toshiba Satellite PS183E-004TV-EN.

  He said the the power supply 15V/5. On the battery, there 10.8V / 4500maH.

  OK I just bought a universal 70W DC Power
  Adapter. http://catalog.Belkin.com/IWCatProductPage.process?Merchant_Id=&Section_Id=2 01473 & pcount = & Product_Id = 168798

  The part No. door model: #MPB001xA. Entry
  11-16Vcc/7A, power: 24VDC 3 / 3. 5 a output power up to 70W max.

  Using the Belkin advanced Configurator, it gets this http://www3.belkin.com/config/intelliTip/intelliTip_results.asp?sid=500925928&recId=30

  Is someone can you please tell me if this Belkin car charger is allowed to use for my laptop, about power requirements?

  I hope someone can help
  Thank you
  Andy

  With output power in 24V - 3 to 3.5 amps, I don't think. If you the intensity a bit late is not a big problem, but if you are not getting enough components amps will surely suffer. But during the amplification them isn't really useful either. Can see if you could find a car adapter that has a power of 5 amps, with a range that remains inside the volts as well. Would work very well then.

• problems with HP Photosmart D5069

  My aunt gave me a D5069 printer with the power cord and the USB cable that connects the printer to the computer a few days ago. My computer is running on Windows 7 and when I connect the printer to the computer, that happens with anything, the computer doesn't save even that something is plugged. For a few attempts to hang him up, the printer came as unknown device but is no longer doing this. What can I do? I tried to download the drivers to install for other Windows formats and I don't have an installation disc. Help!

  Hello meganblackwell,

  Welcome to the HP Forums.

  I see that you have a problem with the installation of the printer to your Windows 7 computer. The reason why you are having problems is that no real impression software is not specifically for Windows 7.

  I have however a link to theprinter install wizard for Windows you can try that will install a print driver base so you can print from the computer.

  Please do not hesitate to write me again if you have any questions or concerns.

  See you soon,.

• HP Deskjet 5400 says that it is not compatible with Windows 10

  I try to install my printer on my laptop with the usb cord and when I try to install it, I get the error message that it is not compatible with Windows 10.  Don't know how to fix this or if my printer is simply too old for me to do something.  Help, please!

  You must use the built-in Windows 10 database driver.

• DeskJet 1010: DeskJet 1010 USB cord not in box

  Last night, I bought a new 1010 DeskJet at Walmart. I take everything out of the box, and there is no USB cord. This printer is supposed to come with a USB cord, or do I have to buy it separately?

  Thanks for responding to my question.

  Sorry, that cable USB must be purchased separately.