DeskJet 1010: DeskJet 1010 USB cord not in box

Similar Questions

• DeskJet 832C USB will not fit HP PC

  I have a Deskjet 832C that I love, but it won't connect to my HP PC. Any suggestions? I do not hear... buy a new one... this printer is great!

  Hello

  That what we call a parallel cable (25 pin). New computers have no parallel port.  As mentioned above, your printer ALSO supports USB so you have to buy a cable/cord as shown in the picture above in a store of the computer (for about $10). You can also use parallel-USB BUT more expensine adapter and can't go anywhere (success rate around 30 percent, according to the pilot/computer/printer).

  On the printer, the USB (almost round shape) is located just above the parallel port as shown:

  

  Kind regards.

• DeskJet 1010: Printer lacks USB cable out of box

  What says the subject; Miss me the printer USB cable right out of the box. I have found nowhere on this site to report such a question, so if someone could send me to where I had to go or be able to directly help me that would be much appreciated!

  For more details, I bought the printer at a local Walmart but have moved since then and am unable to go back there, so I am looking for HP itself.

  Hello

  No, no USB cable in the box, it is clear in the box. You buy you USB cable. He also says

  "USB cables are available from any reputable dealer." that means you have to buy yourself

  http://support.HP.com/us-en/document/c03742903

  Kind regards.

• DeskJet 1512: Deskjet 1512 printer does not install...

  Hello

  I have a Deskjet 1512 printer ' All in one '.

  I followed the instructions of installation and configuration up to the last comma - and still some 6.5 hours later - I still have a new printer that doesn't work.

  I am running Windows XP / SP3 / Dotnet 3.5

  I ran the installation disc (supplied), made a cup of tea, ticked the boxes, responded to the questions.

  When you are asked (and only when prompted) - connected my USB cable and the printer to the computer... This is where the problems started.

  The function of 'Full' whistles and software bells began to try to detect my camera.

  He was defeated by Windows Harward "Wizard" - saying it had detected a new device... but it can be installed "due to a missing Module.

  About 2 seconds later - the HP software "Full Feature" he spits is dummy and tells me to connect my printer and check the USB cord...

  Yes - I replaced the power cord USB ther with 4 different ones I have alternatives, but also try different USB ports on my computer.

  Always the same question.

  However-

  The Scanner was installed - and works very well.

  So, I tried a forced installation of "Backdoor" of the drivers of the printer - via the Windows hardware Manager.

  This all seemed so promising - the pilots finally looked as if they were installing.
  99%, the hardware Popup Manager informed me that my "device had been correctly install '...

  About 1 second later - another window will appear - now telling me that it was not possible to "do something"? and that my ' device was not installed.

  A quick look through the driver manager showed me that my scanner was installed, but the printer was not.

  I completely uninstalled the HP software, then Dot Net... cleaned all Temp files and deleted all entries in registry rogeu.

  Then restarted my computer (after checking that USB 2 has been enabled in Bios - who it was)

  I then reinstalled the far Dot Net (downloaded via the HP Web site) and the "Full Feature" software (also courtesy of the HP site) this day... and...

  .. even the same.

  In short - I tried:

  • Remove all previous installations of HP and Dot Net 3.5 software
  • Relocation of all of the above
  • 4 x different USB cords
  • All the different USB ports on my PC
  • Swearing and the curse (usually works with Microsoft Products only)

  The only thing I have NOT tried, is witch Craft and Country dance.

  Any other suggestions would be very appreciated...

  Update...

  I completely erased from my hard drive and reinstalled XP, SP3/Net fix...

  The printer is installed the first time.

  If everything is working now.

  There was something installed hidden somewhere that the installation process didn't like.

  Thanks for your help with this.

• Advantage of ink HP Deskjet 1515: print but not scan

  Hello world

  I am using HP Deskjet Ink 1515 advantage and when I am trying to scan a page or a picture, shows the following error: the HP Deskjet series 1510 was not found. This is something that has happened today and never before.
  Although the error shows that the device is not found, I can normally print with it.

  I would appreciate all the advice really.

  Thanks in advance.

  Hey there,
  Try the next step, I believe that this will help you overcome the problem.
  1. start by dissconnecting the USB cable.
  2 remove the printer driver of "devices and printer" which is located in Control Panel.
  3. Download this file (http://ftp.hp.com/pub/softlib/software12/COL48430/al-117537-4/DJ1510_188.exe) which is the solution complete for the HP Dj 1515 series.
  4. extract the contents of the file.
  5 open the "Utils" folder and choose the folder 'x 64', inside you should be able to locate a file called 'RemovePreInstalledDrivers' > once you open this file black screen opens, wait for it to close, then move to the next step.
  6. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
  7. after the restart, the head disk Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
  8 follow the steps for you, and connect the USB cable when prompted to.

  Who should add the scanner to your imaging devices.
  Best Of luck ~

• HP Deskjet 3050 (J610) - can not find the claim code

  I have a HP Deskjet 3050 J610 Series. I searched the support site of HP and may not know how to configure my ePrint printers. My ePrint printer turned on?

  There is no instructions that correspond to my machine on this site:

  http://support.HP.com/us-en/document/c03550536

  I found a video on the "HP Deskjet 3050 a" but it was very different from the standard 3050. My printer is set up wireless and I am able to print from my Android smartphone, but only if I am connected to the same wireless network.

  I have the impression that with a connected HP account and my claim Code printers, I can print from my smartphone using the Google Cloud from anywhere, I have access to the internet. I can't find my printers claim anywhere Code. I can print the HP Network Configuration Page in the menu on my printers Control Panel wireless, but it looks nothing like the page in the video.

  Thank you in advance.

  Hello

  The series HP Deskjet 3050 (J610) do not support the ePrint and therefore does not claim any code.

  The printer Deskjet 3050 a Series (J611) supports such a, your printer is not.

  You can view this document as a reference, the printer does not support Web Services and only allow printing via the local network:

  http://support.HP.com/us-en/document/c02814760

  Shlomi

• PC does not recognize the ipod when I plug in the USB cord.

  I have an ipod touch, and it will replace my old ipod.  When I plug the USB cord, nothing is recognized by the computer.  It is also not recognize my old ipod when I plug it now.  I have other devices that use a USB cord, and they work as they should.

  Apple told me to check with Security Essentials to see if they are blocking a pilot... I am quite at a loss.  It's the ipod or it is safety, or is it the computer?

  I tried everything on separate computers, and they don't always work.

  Any help is appreciated!

  It is not MSE-you get a warning if it were.  Try another cable or try on another PC.  It sounds like the cable might be the problem if all of a sudden or iPod works.

• DeskJet F4100 Seryer does not parse and does not open Digital Imaging Monitor.

  I used Solutions from HP to uninstall and re install the software 3 times and still, I can't scan and monitoring of digital imaging will not open.  The only thing I can do is print and copy.  I got lost.

  I try to use this software first, go up to level three and see how the software responds after that remove you it:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=MP-49133-2

  And you can go a little more in detail about what happened? Don't you think it might be a problem connecting with the power cord? I would try replacing the USB cord and try another in its place.

  Let me know!

  If you think that I'm being useful, a great way to show your thanks is by clicking the star under my username on each post to give me congratulations, a quick way to say 'Thank you' on the forum. In addition, you can click on the Solution below to the right of my post to show others how the problem was solved.

• Cannot print in Win 8 and Excel 2013 Deskjet 3000 USB plugged - resolved

  Hello

  Newly installed computer running win 8/64-bit and Office 2013.  Have Deskjet 3000 USB printers.  Last driver HP and the latest installed MSFT.

  Searched for this problem and most seem to be reoslved by changing the print quality settings, I tried all project photo and same result.

  When I print from Excel, I see my spreadsheet in the Preview Print print area is correct.  I click on print and if I quickly change the status of pinter I see document number go from zero to 1 and then back to zero what any windows spooler.  I also changed printer for any coil.

  I have no problem printing form other applications Office Word and PPT, or Adobe Reader or my browsers.  Just in Excel.

  Don't know where to go from here? I ran the HP diagnostic tools and they work very well and that you can get test pages printed on them as well as Windows itself.  No error messages at all when the problem occurs, the print file seems to disappear.  I can print in a file from Excel and then print this file if its PDF without problem.

  Very mysterious!

  Thank you

  OK update:

  I removed the HP software and driver and simply use the native Windows 8 driver and everything is wonderful.  Seems strange that doesht mfg driver work but the Windows version only.  All that I know is just remove any HP software and the driver and just take the default of WIndows and life is perfect!

  Hi rich, happy to hear that the problem is now resolved, thanks for posting back with update

  

  Ciara

• Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord...

  Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/

  The following steps may be worth a try:

  Insert your memory card into your Media Player...

  Reach... Start / computer...

  What is the memory card show as a drive letter? (if your Media Player)
  has several slots, there will be several "hard drives" listed... the
  SD card will be one of them)

  If_Yes_right click on the drive letter correct and in the menu... Choose...
  Open... now you should see the directory of the memory card or to explore.

  From there you should be able to drag and drop or copy and paste the
  files in a folder on your hard drive.

  Also... the following items may be worth a visit:

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• HP Deskjet 2512 Director does not work on Windows 7? Is there a solution?

  HP Deskjet 2512 Director does not work on Windows 7? Is there a solution? Everything that happens is two pages of text, open, but no Director. I downloaded and installed the latest version of the software full version DJ2510_1313. No help for it?

  Hi DJ2512,

  I understand that you have a Deskjet 2512 which is not able to open the Printer Wizard, it opens to text pages. I'm sorry to hear that, but I'll certainly do my best to help you!

  From what you described, it seems that your printer wizard opens to a page of the Notepad. I suggest you follow this document Opens Assistant HP printer with an error in Script or in Notepad to get the problem resolved.

  Hope this helps, have a nice day!

• HP Deskjet 3050 J610: HP Deskjet 3050 J610 will not scan

  My Deskjet 3050 J610 will not scan. On the printer I ask him to sweep and I get "error Scan. Try the Scan of the computer.

  I have no instructions to achieve this. There is no icon for scanning and no sense.

  Thank you for your response. I downloaded and tested the necessary software and it worked perfectly.

  Thank you for helping me with a resolution.

• HP Deskjet F2210 printer will not print my documents with the exception of my e-mail highlighted

  HP Deskjet F2210 printer will not print my documents with the exception of my e-mail address highlighted who is on the document, it is not cartrages, as it will print one page black and multicolor of the internet. Help, please.

  If you found problems with print quality with the only printer without printing from the computer, then it is a hardware problem.

  You may need to contact HP (1800-474-6836) support. Looks like a print head may be bad or needs to be cleaned manually. I don't think that this printer has a detachable printhead to clean manually.

• Deskjet 6122 driver will not properly work on a HP Proliant ML 150 6 Win Server

  Deskjet 6122 driver will not properly work on a HP Proliant ML 150 6 server running Window server 2003 Enterprise edition SP2. I have loaded driver 990c and it works, but the side two the 6122 print function will not work with 990c. Is there any solution for this?

  I'm afraid that there is no specific driver for this OS. The 990c driver will be the only option to get to work. I'm sorry.

• My HP Deskjet 2480 printer is not in the installation options. I can't print.

  OT: printer.

  My HP Deskjet 2480 printer is not in the installation options. I can't print.

  You can download the latest driver to:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-F2400-all-in-one-printer-series/3811093/model/3811136