2 Facer function not installed on my J6480 all in one.

Similar Questions

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• Can not install my new HP All In One printer

  Original title: CANNOT INSTALL a PRINTER ALL-IN-ONE COST of HP 5610

  EVRY TIME I TRY TO INSTALL A FRSH HP5610 ALL-IN-ONE PRINTER, I GET THE MESSAGE AFTER

  NO MISSING DLL FILES, SLBCSP, SCCBASE, GPKCSP ENUM I DOWNLOAD AND TRY TO INSTALL NOT NO CHANCE

  See if it helps:

  Error blocks the installation of the HP printer driver: sccbase.dll, slbcsp.dll, gpkcsp.dll and Enum
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-blocking-HP-printer-driver-installation/5c7910a1-1b4b-404F-875e-12e092b07db1

• Have a disorder of the function with the printer officejet J6480 all-in-one of analysis.

  I have a problem to use the scan and copy function.

  The result is a black image dark without texts even configured to scan as a PDF under Windows 7.

  It is even when you use the function "copy".

  Hello vtcy

  It doesn't seem to be a problem with the scanner itself because the copying and scanning are performed. The links below are for the abandonment of the warranty support options and the program of HP recovery. It may be useful to negotiate in some credit to acquire a new purchase of course that if you really like your printer, you can get a repair.

  HP out of warranty of the Support Options for selection of printers HP

  HP trade-in program

• HP Office Jet J6480 All In One - will not analyze with Mac OS 10,8.3

  I could not get my HP Office Jet J6480 All In One scanner after upgrading to 10.8.3.I followed other positions and have installed the most up to date driver (http://support.apple.com/kb/DL907) , but whenever I try to scan from the HP Device Manager or photosmart studio, it says "sorry, scanner could not be initialized. (scanner not found) "I tried to make sure there is no other updates by clicking settings in the Device Manager by clicking on check the updates but it says 'server not available - service software is currently not available. "Please try again later" and I got this error for the last week.

  I followed the second set of instructions available here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve this problem and install the software found on the link. I restarted my computer and I always meet the same problem.

  Note: My printer is wireless and I have not hooked by a cable. Will make a difference?

  My printer seems to be printing very well.

  Thanks for any help you can provide.

  Sara

  To add, both HP Device Manager or photosmart studio are part of the software and not designed for Mac OS X 10.8 10.5.

  Here are the steps to scan with your printer on mountian lion, make sure to run the software update first to ensure that the latest HP drivers are installed:

  http://support.HP.com/us-en/document/c03550518

  Where the scanning software do not work as expected, that more probably caused by incompatible drivers installed on your system.

  In this case, remember to remove the software by following the HP uninstaller program (under Applications > Hewlett-Packard), rebot Mac and install the correct software by following the steps below:

  http://support.HP.com/us-en/document/c03378792

  Shlomi

• OJ j6480 all in one. : printer connected to the network, but will not print.

  OfficeJet j6480 all-in-one Windows 8

  My printer configuration report show that the printer is connected to my home network. My Control Center shows that my HP printe (my only printer) is listed as the default printer. When I open it, it shows a document in the queue, and offline. When I click on 'offline' the document in queue is considered and when I click on "Printer" in this window, the drop-down list displays the default printer, but 'use printer offline' isn't not verified. Bottom line, it's that I can't print. Help much appreciated woutd.

  I found someone with a similar problem and a simple solution. I deleted my printer in the "devices" list and reinstalled

  It worked. I suspect that your suggestion about the IP was probably on the brand, it had not occurred to me.

  Thanks for the quick response.

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• HP Printer Wizard does not open in HP 3050 All In One J610 series.

  HP Printer Wizard does not open in HP 3050 All In One J610 series after installing new ink cartridges.  Uninstalled and reinstalled printer software from HP website.  Printer Wizard will not always be open.  Using Windows 7.

  I understand the Printer Wizard does not work for you. I will try to completely uninstall the software and reinstall with updated drivers.

  Click here for the drivers

  Let me know how it goes.

• Why does vista install HP officejet j4540 all-in-one?

  Why does vista install HP officejet j4540 all-in-one?

  Hello

  Select your drivers vista from the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3645094&LC=en&cc=us&DLC=en&lang=en&cc=us

  and follow the information here to know how to get started Setup etc.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3645094&LC=en&cc=us&DLC=en&lang=en&tmp_track_link=ot_we/prodlink/en_US/3645094/loc:0 & cc = us

  For more information contact the HP support

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&lang=en&product=3645094

  or HP support forums

  http://h30434.www3.HP.com/

• My Mac does not recognize my PSC 1610 all-in-one printer.

  All of a sudden my mac does not recognize my 1610 printer all-in-one.  I think it may have something to do with the system 10.8.2 upgrade but I'm not sure.  I followed the instructions and uninstalled and reinstalled the software.  Software update does not seem to think that miss me anything, no update is listed.  Nothing has changed other that the OS and I use this computer and the printer for 3 years.  No printer appears in the list of system preferences.  Error when I try to print is 'not connected printer.

  Hi beaumast,

  Have you tried using a USB cable?

  If you tried it on your friends computer and got the same experience there is a possibility that the USB port on the printer has malfunctioned. Here are some links that you may find interesting if you consider upgrading your printer.

  HP trade-in program

  Current for sale Photosmart printers

  HP out of warranty of the Support Options for selection of printers HP

• does not scan the HP 5500 all-in-one. gives message: "install or run the software.

  I have a HP Officejet 5500 all-in-one and an IMac with OS X 10.6.8.

  Never before shot with this HP and this computer.

  When I press scan on the printer button lights a flashing light with the following message: "You Normand to install or run Hp software for feature." In response to this message, I searched on the HP site for the driver software for my printer that match my computr. Downloaded and installed the software, but I still have exactly the same error in the printer.

  The printer is probably more than 5 years. So far I used it only as a fax (hanging on a telephone jack) machine and a machine Fotocopie. I print to a HP Lazerjet printer that has no option analysis.

  Can anyone help? Thank you in advance

  I'm not sure how long it takes, however, here are a few tricks with Capture of Image:

  1. After choosing your scanner on the left side, click "Show details" on the bottom.

  2. on the right side of the screen will be a lot of options, including the location of the format and scanning to file, resolution, and color / B & W.

  3 select the file you want first, then the scan store then the other parameters.  When you have finished changing the settings, click Preview.

• Do not install LR CC at all

  Hello

  I bought the Photoshop & LR5 license and started setting up this morning with the help of Adobe Application Manager.

  Photoshop, Bridge and other apparently correctly installed software.

  I can't LR 5 installed, I tried 4 times, whenever it downloads, extracts, and fails in installation.

  The error message:

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DW006...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  -Payload: AdobeLightroom5CCMPkg -.

  ERROR: DW006: Apple package cannot be installed successfully.

  ERROR: third charge useful Adobe Photoshop Lightroom 5 installer. pkg failed with exit code: 1

  -------------------------------------------------------------------------------------

  I don't know if it's related, but I installed it regarding games SDK 1.3, (I see it in the Applications folder) but Application Manager is not installed...

  I have a Mac OS X 10.6.8

  Thanks for your help

  I would say the problem is that Lightroom 5.2 (which is what is installed by the cloud) is not compatible with 10.6.8. You must go to the Mavericks. It's free.

• failed to install for photosmart b109 all-in-one a - m. has said usb not connected to the computer

  I replaced Vista with a new version of windows 7 64-bit and cannot get my HP Photosmart B109 all-in-one a - m at the end of the installation I downloaded from the HP site. I uninstalled this printer as suggested before attempting the download. He gets to the part where you plug in the power and then the lights on the printer the computer tells me that my USB key is not plugged into it. I tried changing USB website and tested the USB connections and ensure that they work on the computer, but still the same response. The program then continues to stay on the installation of the final software and never complete. Talked with a local tech guy who suggested that you contact because he has no idea.

  Hi, thanks for the suggestion. However, I did not upgrade but remove vista altogether. I found the problem after a lot of grief and research - there was a cord that had fallen on the back of the library that was not plugged in!

• Printing problems of Notebook PC G72 for Officejet J6480 all-in-one

  Unable to print on my Officejet J6480 HP printer all in one of my G72 Notebook PC.  Do not know what is happening, I could possibly print incorrect setting.  But I was able to print before.

  Hello

  · What is the operating system installed on the computer?

  · You receive an error message or error code when you try to print?

  · This occurs when you try to print with a particular application?

  Try the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

• problem of download/install HP psc 2355 all-in-one driver

  With the help of the operating system of windows xp with service pack 3. Printer model hp psc 2355 all-in-one. When the driver download/install is done I get the pop-up window

  2.5 FEAD OPTIMIZER.

  "The device is not ready".

  File:C:/Temp/hp_web release

  Error code: 21.1812.01.2.25016

  Please send error to [email protected]

  Using the USB connection method.  I had my computer repaired by Geek Squad and need to reinstall my printer driver. Any help much appreciated. I tried all that I know is not much.

  Hello

  This message is related to the downloaded package that comes with the setup of the netopsystems.com created install creator.

  Solution:
  1. perform an uninstall of level 3.

  1. turn the all-in-one off and disconnect all cable USB/Ethernet of all-in-One to the computer.

  2. Insert the CD-ROM of all-in-one in the computer. Cancel any windows installation that appear.

  3. click on start in the bar of tasks and then run.

  4. in the command box, type command, and then press Next:

  X:\Util\CCC\Uninstall_L3.bat

  (X: is the drive letter of the CD-ROM the CD-ROM of all-in-one is in, if the CD-ROM drive letter is "the command must be D:\Util\CCC\Uninstall_L3.bat)

  2. use the Windows Cleanup utility and remove all entires of netop software systems or HP AiO

  This is the web link to download the "Windows Cleanup utility".

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Below listed Remove HP related entries if they are registered.

  The HP Imaging device functions
  Documents HP Viewer
  HP Photosmart Essential
  HP Image Zone
  Gallery HP Photo and imaging
  HP Photosmart, Officejet, Deskjet, or Scanjet, (with the name version number and product software)
  The HP software update
  HP Share on web
  HP Solution Center
  HP Director
  HP memories disc
  Greeting Card Creator 32
  NOTE: Do not remove all the elements other than those mentioned above.

  3. download the package again and re-install.

  Here are the web l ink to download and install the all-in-one software for PSC 2355 all-in-one drivers

  FTP://ftp.HP.com/pub/softlib/software4/COL10513/OJ-30616-1/nn_rub_w01_Americas_Euro1.exe

  Installation instructions:

  (1) disconnect the USB cable from the back of the computer.
  2) double-click the downloaded file and install the all-in-one software, in the middle of the installation, it will prompt you to connect the USB cable then connect it and continue with the installation.

  In my view, these solutions have helped to solve the problem.

  Kind regards.

  Monalisa.