2012 Standard on T420 PowerEdge Server installation

Similar Questions

• 2970 2012 on Dell Power Edge Server installation

  Hi all

  I am trying to install Windows Server 2012 on a Power Edge 2970.  I use the Dell Windows OS track install Support Pack Dell system Build Update Utility but then when I get to the media Server 2012 install it loads but then bird missing a driver error.  Installation cannot continue.

  Can someone please provide suggestions or ideas?  I have a Server 2008 R2 running on Dell Power Edge 2970 system.

  Thank you

  Ron

  SBUU what version do you use?  You should use GDPS (systems management tools and Documentation) 7.2 or later version, not SBUU.  Have you tried to install directly from the Windows support?  What is the EXACT message that you receive?  Note that the eccentric the 2970 chipset will probably require allows you to load the driver during installation if you are using a CD/DVD drive.  Installation of USB will avoid this scenario.

• Downgrade Windows Server 2012 Standard ROK to Windows Server 2008 R2

  Hi Helpdesk,

  We are facing problems of decommissioning Windows Server 2012 to Windows Server 2008. We contacted your local helpdesk in Saudi Arabia, but we do not have adequate support. Please, help us to downgrade the license and we are in a huge pressure to activate this server and bring it to production.

  Kind regards

  Mohamed Shaji.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows Server 2012 Standard activation

  I just bought PowerEdge T110 II with Windows 2012 Standard operating system.

  It come with preinstalled OS? is activation required? Last time I bought Dell is Dimenstion 8400 with Windows XP, which was related to the Dell motherboard, so activation was not necessary.

  I will probably play with the installer and try different things before I install OS for the long term. If activation is required - reinstall OS more than once on the same box is problem? My knowledge of the client MS OS-es, that's fine, but I don't know anything about the servers.

  "Is reinstall several times on the same hardware ok?

  Yes. The servers are not different here: it uses the same activation mechanism.

• Windows Server 2012 Standard Activation failure

  Hi MS supports,

  We have two Windows Server 2012 Standard which must be activated with the information of the right at the bottom of the windows desktop as shown in Figure 1.

  Then, I run the command slui and enter the product key to activate as shown in figure 2.

  Unfortunately, I got an error with already shown as Picture 3.

  Note,

  • I called the Activation Center as indicated in picture 4 in Norway to attempt activation by phone, but the CSR told me that they cannot generate the confirmation ID to activate the operating system.
  • The server is not connected and cannot be connected to the internet for internal use only.

  Can I have your help to solve the problem? and I also need to know the impact if it is not enabled.

  Thank you.

  Figure 1:

  

  Photo 2:

  

  Photo 3:

  

  Photo 4:

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• PowerEdge 2950 installation home

  Hi guys,.

  I was wondering if someone can help me to choose the installer for my server at home (software wise).

  I installed my PE860 PE2950 III. PE860, I got Windows Server 2012 essential, but given that my school gives me all the free MS software I thought to go with Windows Server 2012 R2 Standard.

  PE 2950 Config:

  1. 2 x 2.33 GHz Quad Xeon E5410
  2. 16 GB OF RAM
  3 Perc 6 / I with RAID RAID 5-4 x 750 GB, 2 empty slot and 1-2 x 146 GB 15 k

   

  Principal I will use server as:

  -File server, storage media

  -SQL Server Business Intelligence 2012

  -Visual Studio 2013 Pro

  -IIS

  -in the near future with NVR video surveillance

  1 should I go with Essential version or standard since it is free anyway?

  2 should I configure some virtualization, separate for each activity?

  Thank you

  I'd be inclined to say 'Standard '... Standard includes, in the single-user license, the ability to run 2012 directly on the hardware for purposes of management, and TWO virtual instances within this physical body... so, basically, you can run two servers for the price of one (don't forget the license, you cannot do anything other than the management of Hyper-V in the case of the physical host.)

  You could do your development stuff in a virtual machine and the media on the other stuff (or run only the dev VM and use the physics/host for tips of media... or if you have multiple licenses, install as many virtual machines as you have licenses for and/or need).

  Virtualization is the future (correction, is already the standard for deployment of server), so if the idea is to stay side by side and paid in current trends and technologies, and then do as many possible virtualization - at least as much as is possible, in view of your projects (it is also important to recognize the differences and limitations of each).

  I might be inclined to recommend you put your 4x750GB in a RAID 10 disks, you will get better overall performance from a 10 to a RAID 5 RAID (RAID 5 has good performance of reading but writing bad performance (bad for database use and probably for recording (NVR) media) and RAID 10 has read and write performance).

  Essentials is not only more limited, it is less flexible.  For example:

  • You MUST implement Active Directory with Essentials (with special exceptions) - it is optional with the standard (for example, you can use a workgroup)
  • less than IIS and other types of connections (though it might still be enough for installation of your 'home')
  • Hyper-V (to run virtual machines) is NOT available in Essentials
  • Essentials includes a license for a single virtual machine a physical machine GOLD - not both
  • of 'Assistant', so is managed differently (with fewer options) than the standard

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• Mirage Server installation fails: the server failed to register

  Quick history: the single server installation (Server 2012 R2 w / SQL Express 2012) using the version 5.5.05294 for all components. I have a dedicated domain service account and management group that has local administrator rights and I am connected using this account. I have disabled UAC completely. I've successfully installed the Mirage Management Server and the SQL database looks good. I installed the Console of Mirage as well and can connect to the server and load the license key.

  Here is the error I get when you install the Mirage server:

  

  It does not right 'Record VMWare Mirage to the Cluster of servers', which is located just past the step where it checks the version compatibility. If I go back to the Console, I've seen the Mirage Server installed, but gives the status of "Version mismatch". I am 100% certain that the version is the same (5.5.0.5294) and even when so far to control binary files and the SQL database to ensure that all list 05294 version:

  

  As you can see, the version is the same and I have already installed the management server:

  

  You look at the log of the server installation.

  Install using:

  msiexec /i INSTALLATION_PATH/l * v LOG_FILE

  Open the log file and look for errors after the message, it could lead you in the right direction (post the log of the excerpts here)

  Make sure that your Mirage account has the correct permissions in AD (KB 2105800 details most of them).

  Also, make sure that the user has read permissions to users and computers basic UO in AD.

• What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  How can I fix this error? Thank you.
  SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.

  Hi DMarie125,

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Hope the helps of information.

• during startup, I get an error message. Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  during startup, I get an error message.  Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  Thank you for visiting the Microsoft answers community.

  The question you have posted is associated with MS SQL server and would be better suited to the Group Discussion TechNet Microsoft. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In the face of the question then Server installation SOA to put up BPM11g working environment

  Hi all

  I was able to install the Weblogic Server and database, but I am facing problem in SOA server installation.

  I try to install it to run application 11g BPM.

  I saw the same problem has already been answered, but available solutions are not solve my problem.

  Error message: Specify the location of the JDK/JRE when you launch the installer. Invoking the setup.exe with - jreLoc < JDK/JRE location absolute path > settings.

  I tried both way to initialize the installation. IE directly through setup.exe and command line, but in both cases I get the same error.

  He don't ask for path to Java command-line also.

  (a) in my java 7 system is installed.

  (b) I used Oracle Database 11 g instead of XE

  This could be the reason?

  I checked the program files:

  jre7 and jdk1.7.0_45 are here.

  I also set JAVA_HOME in the C:\Program Files\java\jre7 environment variable

  path: C:\Program Files\java\jdk1.7.0_45\bin

  Please help me to solve this because I'm stuck in this facility in recent days.

  Thank you!

  Try running the setup in the disk1/install/win(32/64) folder and then provide the path to the jdk "C:\Program Files\java\jdk1.7.0_45"

  Kind regards

  Anshul

• New Mobile Server installation

  We have set up a sandbox test for Mobile Server.  We have completed the following.

  Server installation:

  1 Installing Glassfish

  2. install the Mobile Server

  We can connect you to the Mobile Server and the services are running

  Customer

  1. download sqlite and compiled through MinGW

  2. from customer customer consulted and downloaded files for sqlite win 32 platform

  3. in the course of execution msync we get a successful communication.  Registration of the device I get

  Lack of information to go forward

  Error code: invalid platform: the thread is already in background processing mode.

  Hi Bob,

  You must run setup.exe to install the client with the Admin rights on the Windows platform.

  Thank you

  Oracle Database Server Mobile Development

  Winnie.Hu at oracle dot com

• Linux HQ Server installation error

  Hey everybody,
  
  I installed on my RHEL 4 HQ server and the Agent.  The agent installs fine, but when it goes to the server installation I get this error.
  
  Someone has seen this before or have any ideas what may be the cause of this?
  
  Installation of the server...
  Unpacking of server to: / home/admin/hyperic...
  Creation of server configuration files...
  Copying the binaries and libraries of the server installation...
  Copy the configuration of server file...
  Copying files db setting at the server level...
  Copy of the libs of server...
  Setting up database server...
  Loading taskdefs...
  Responsible Taskdefs
  --------------------------------------------------------------------------------
  An ERROR has occurred, the installation cannot continue.
  
  /Home/admin/hyperic-hq-installer-4.5.2/installer/data/setup.xml:493 error: the following error occurred during the execution of this line:
  /Home/admin/Hyperic-HQ-Installer-4.5.2/installer/data/Setup.XML:502: the following error occurred during the execution of this line:
  /Home/admin/Hyperic-HQ-Installer-4.5.2/installer/data/Setup.XML:683: the following error occurred during the execution of this line:
  / home/admin/hyperic-hq-installer-4.5.2/installer/data/setup-db-MySQL.xml:10: the following error occurred during the execution of this line:
  / home/admin/hyperic-hq-installer-4.5.2/installer/data/setup-db-common.xml:151: /home/admin/hyperic-hq-installer-4.5.2/installer/data/tmp directory creation was not successful for a reason
  
  -Danny

  If you are with the user account 'hyperic' insalling then you must provide all permissions to the installation directory.

  Here is the command for permission problem "/home/admin/hyperic-hq-installer-4.5.2/ chown-r hyperic.

  Let me know if this helps.

• Is it possible to have more than 1 web root in a CF windows server installation?

  Is it possible to have more than 1 web root in a CF windows server installation?
  I need this because of the different network location I'm debugging my sites.

  nikos101 wrote:
  > Is it possible to have more than 1 web root in a CF windows server installation?
  > I need this because of the different network location I'm debugging my sites.

  ColdFusion do not care about the web roots how have, your web server can,
  but ColdFusion doesn't.