2510 prints red on everything.

Similar Questions

• Photosmart C & 180 will not print red

  The printer has suffered when we had a power cut and he was turned on.

  Since then, it will not print red. (I just get yellow).

  Have looked through the wire "Will not print Magenta", I'm not sure who, magenta cartridges (or both), I need to try hard - or if there are a few other adjustments that I do.

  Hello Phil1812,

  Please confirm the process you have already finished.

  Another process, you could try is as follows:

  (1) remove all ink cartridges.

  (2) close the ink access door.

  (3) disconnect the printer.

  (4) wait for about 30 seconds.

  (5) connect the printer.

  (6) a message indicating to load the cartridges should appear on the control panel.

  (7) reload cartridges.

  Kind regards

  Lynn_B

• I have and HP 4 in 1 printer, etc. Everything works except the impression.

  I have and HP 4 in 1 printer, etc.  Everything works except the impression.  Under control panel, the printer shows as loan and default. When I send a doc, he's going to wait but does not print. I tried a lot of things.  Help?

  • What printer model?
  • What version of Windows, including service pack?
  • How the printer is connected to the computer?
  • Printing has already worked with the printer? If so, what happened just before the problem started?
  • The other functions of the unit working ("everything works") involve the communication of the computer to the device or you are talking just to use it to make copies and send faxes using the controls on the front panel of the unit? Please provide examples of what works.
  • You have another printer connected to the computer, and if so, can you print to it?

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• Cannot print red

  Printer has stopped printing red. I have changed the cartridge, still does not red print. I went through all the cleaning, by aligning services public etc, no change. Now the printer began to print a diagnostic page after each normal page and I can't stop doing that! I just bought 3 new cartridges so really want to end up having to buy a new printer to solve the problem. It is a HP Office Jet Pro K5400n bought in 2008 and had worked well so far. HP tell me he's too old for their support.

  Also try manual cleaning print heads, without change.

  I put in a new magenta/cyan print head now and it has worked to correct problems - red prints again AND boring diagnosis page has ceased to be printed after each print.

• HP Deskjet 3070: I try to print red, but it comes out yellow

  Hello

  I have a HP Deskjet 3070 e-all-in-one - B611a. I was able to print correctly before of my HP Pavilion laptop to Windows 7 32-bit OS, but last week my printer started acting strange. When I try to print the text in red, it comes out yellow. When I try to print a purple variant, he leaves little green lifestyle. If I want to print Yellow, blue or black, it is printed correctly. I checked the ink cartridges, they have been placed correctly. I cleaned the print head, did not help. It seems as if my printer cannot print red more or the Red cartridge is somehow filled yellow ink... Can someone help me please?

  THX,

  Frederik

  It seems that the magenta ink is not printing correctly.  The steps in this troubleshooting page can help.  If they don't resolve the problem the message here can help.

• Will not print red

  Hi, I own a number of hp photosmart premium c310 series: model {deleted personal information}: cn503a it will not print red. Have preformed obvious troubleshooting, other technical suggestions. Could not do stack or facing other alternatives with similar problem

  Did you also check to make sure that the printer firmware is up-to-date?
  I would like to do a manual cleaning the contacts on the cartridges, the printer and the print head next to ensure that this accumulation on these pieces is not the cause of the problem. Solution 4 this document here shows how to clean the contacts of the cartridge on the cartridges and the printer. The solution in this document here shows how to clean the print head. I know that the titles of the documents do not meet your specific question, but they are the steps to take to remove accumulation. If you have the print head of the machine, take a look at the printed on date while you clean the contacts that the date is in this part of the printhead. If this date is not passed, this is a replaceable part that can be troubleshoot-performed and replaced by contacting HP Total Care. If this date has passed, please post back with this date and I can give directions over here.

• Printer not printer RED

  L7555 - AIO-Vista home premium, no Magenta printing, you can test print head? I did everything else. Everything is authentic HP. print 20 copies large then began the vertical lines cleaned the print heads and Magenta went. has worked for a few copies then day and then not red again. I'd rather not spend $80 on a new print head and find tht is not the problem.

  This document for Troubleshooting print quality problemsmay offer assistance here. Part of troubleshooting covers the print heads.

• 6700 does not print red

  OfficeJet 6700. With the help of HP ink cartridges.

  Blue, yellow and black all print OK. However, the red color print as a kind of Brown.

  Replace the Magenta XL HP cartridge with a new one with the same result.

  I ran in the OfficeJet Wizard, the diagnosis the reports tab in the device information.

  Black, yellow and Cyan samples printed with the appropriate color. However, Magenta print as a purple muted with many horizontal stripes.

  I then ran the clean print heads.

  All the outputs black seemed clean and sharp. Color samples, with 3 shades of each color displayed in blue (ok), muted purple (all striated), Brown (méché) and green (ok).

  Running a third level cleaning produces a similar, but more streaked, results for the samples of violet and Brown.

  Replacement cartride Magenta leads to the same results.

  When I printed a page of my computer, red appeared as browns.

  The same programs running on the same computer with my previous printer HP DeskJet 970 worked.

  Is there some kind of color profile that must be loaded to correct this?

  My 6700 printer is around the age of 7 months and I never came across this problem in the past.

  Help, please!

  Since I have no answer on this forum, I called HP Support.

  After several tests, it was determined that the printer was defective.

  Since I was still under warranty, a replacement (reconstructed) printer has been sent.

  Now, everything's fine. Problem solved!

• Will not print red F4580

  My f4580 prints everything red yellow, if I use the cleaning cartridge program it works but I have to do each time. Any help please

  The number of our UK customers should be: 0844 369 0369

• Designjet z5200 will not print red

  I use the z5200 for printing of banners, posters, and other major media print from photoshop.

  Red do not print correctly and is often replaced with colors salmon-ish or brown.

  Please notify

  No... print head only... ink was very well.

  #70 print head is yellow and magenta together.

• Designjet Z3200ps photo: Designjet Z3200 cannot print red

  Hello

  I had beautiful posters on my printer printing problems, because the colors are not exactly what I was seeing on my screen. Most of the color was beautiful, but always seemed a little cold, devoid of the Red range orangey color. I have calbrated the printer twice and all the colors look perfect. After several unseuccessful attempts to manipulate the colors with the HP utility

  I decided to print a color chart with red, green, blue, Cyan, Magenta and yellow. All the colors are almost perfect, except for the Red; He printed almost black. What is c? How can I fix? Moreover, the Red cartridge is new, but there is no deal.

  Thank you

  Max

  I suspect that your black carpet & red printhead was bad... replace & try again. also your media color calibration

  Use of course good icc profile for the paper you are using. myself using the HP everyday photo glossy or satin paper.

  or brilliant canvas. I use all the hp photo gloss/satin with icc GE Profile & very satisfied with the results.

  My Z3200 44 '' 2 print the most beautiful, colorful posters vives, pictures etc and I also have 2

  Z3100 & so perfect print

• hp deskjet 2510 printer does not print

  Im trying to print some stuff but its says no paper in the printer, but it is how I fixs do this? and also the bit where the book comes out is open to what is not a reason for which his impression not.

  Hi @ngatituwharetoa,

  Thank you for joining the HP Forums!

  I noticed that you get the error of paper with your printer HP Deskjet 2510. I'm happy to discuss this issue for you!

  Please, try the procedure described in this guide, Error Message "on paper" and the printer is not Pick Up or paper feedand let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide helps!

• hpL7580 printer red ink does not print not EXCEPT when running diagnostics

  I have a hp L7580 and for the past 4 months red ink not print NOT either at all or only when you feel stroking in. I bought a new ink cartridge Magenta hp and I replaced 2 times the printhead with new heads of hp. Those dear people... come on hp! I have run many times diagnostics but also cleaned the printheads, printer-aligned and calibrated the line break. All these troubleshooting steps have been made several times that I have appendages. The Red (magenta) out of big beautiful even on tests, but to print anything just forget it. He's not here and it is getting old. Please help with something different and works if all goes well!

  [Moved from Community Participation]

  .. .come on hp!

  Hello

  1 have you tried reinstalling the drivers?

  2. check with HP support.

  http://WWW8.HP.com/us/en/support.html

  Don

• Epson printer does not print red color.

  Original title: I have a printer Epson SX110 Series. Troubel is that it will not print the coloar RED at all. All new cartridges, was working fine last night. Could you please help me.  Your JB

  I have an Epson SX110 Series printer. Troubel is that it will not print the coloar RED at all. All new cartridges, was working fine last night. Could you please help me.  Your JB

  Hello

  ·         You did changes to the computer before the show?

  ·         What application are you using to print?

  ·         What operating system is installed on your computer?

  Method 1: I suggest you follow the steps in the link to fix the problem:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: You can also try to download the latest driver on the Epson site and check if it helps:

  http://eSupport.Epson-Europe.com/CountrySelector.aspx?LNG=en-GB&data=emW65r3CP2FEFCEcZMfKegKdCohCVtGx

  Reference: & Support drivers: Epson Stylus SX110-known issue

  http://www.Epson.EU/nbsp/printers-and-all-in-ones/Epson-Stylus-SX110/drivers-support?target=article&Extn=.html&articleid=1334

  If the above mentioned methods does not help then contact Epson for assistance:

  http://www.Epson.com/cgi-bin/store/AboutContactUs.jsp