300 to 700 RAID migration

Similar Questions

• PX6 - 300 d - double Raid 1 is not possible?

  Hi guys, I hope I'm missing something, so I'm tender hand to support community. I've had a px6 for awhile now. I love. Works very well with VMWare hypervisors. I've been running a RAID 1 and a RAID 5 for over a year without any problems.

  Now, my needs have changed. I run 2 raid-1 matrices. I deleted my raid-5 array and don't see Ano option in the list to create another Raid-1. Why is this? I see raid-10, but not what I need. Just another Raid-1.

  In my case, I need to divide the disk IO system in another array of disks in raid1. Simply becoming the current Raid1 is not enough, because there a lot of requests for e/s which should not weigh down the second raid-1 array. I need raid1 because of the performance and the protection it offers.

  Can someone comment on the creation of another array of Raid-1? I hope that I don't need to buy another NAS compete for this task.

  Thanks for the tips!

  Figured it out. There is a bug in the GUI. Once you have 1 raid-1 array configured, there is no option to create an another raid-1 array. BUT, if you select a new table and set of raid-10, it can reset to raid-1 on the creation. I have now 2 tables separated from Raid1 created by doing it this way. They are NOT wiped off of mirrors raid-10.

• Change RAID 0, RAID 1

  I have a HP M7567c with a RAID configuration. Originally it was set up as a RAID0 (Striping). I would change in RAID1 (mirror).

  I didn't find anyway to do it easily.

  Issue.

  The windows recovery resets the RAID, so I can do RAID1?

  Is there another way to do this?

  Basic information

  OS: windows XP Media Center Edition

  HD: 2 300 g drive Raid 0

  Thanks for your response

  David

  If you want to migrate from Raid 0, Raid 1, here are the steps:

  1. first create a backup of your files

  2. create a set of recovery disks

  3. remove the existing table (Raid configuration) via Bios Raid or a GUI utility Raid (matrix of Intel or NVIDIA)

  4. create a new table

  5 perform the system recovery

  6. restore the backup files

• failure in RAID 6

  I have NAS PX6 - 300 d with RAID 6, it records images from surveillance cameras this week one of the drives has failed and the cameras stopped working with RAID 6 should not continue to burn? the drive has been changed and now I can't access the shared folder

  PS. Update Firmware for NAS will lose my data that is in the files?

  Thank you

  I have it
  RAID it only protects data, but registration does not continue.

  Thanks for the help

• Adding space with bigger hard drives with 3WARE 9650SE RAID

  My original installation of Windows 7 is on a RAID 10 set up using 4 640 GB drives on a 3Ware 9650SE RAID card.  I replaced the drives one at a time with 1 TB drives, leaving reconstruction table each time before adding another.   Now that all 4 are in place, I would have a little less than 2 TB of space, but it does not appear.  Win7 is installed on a 200 GB partition, with the rest of the disk space showing that GB 972 yet (that I use for file storage).   Any thoughts on how to extend this option to use all the available space under the name more storage RAID 2?  I does not appear under management of the reader and does not help the 3DM 2 with resizing tool.  This has worked well for the RAID migration when on the SATAs motherboard, but it's another controller.   I would prefer not to have to reload Windows to use the extra space.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  Hope this information helps.

• Help me. H700 RAID does not detect the HARD drive.

  Hello everyone!

  My Dell C2100 used CPU X 5650 and 700 Raid Perc.

  After connection, system says:

  "Enclosed envelope does not support in the direct mapping of the controller mode.

  Please contact your system.

  System was interrupted because of the supported configuration. »

  I replaced the H700 raid, then wire and FW update. System not notification but after press Ctrl + R, perc raid h700 not detect any hard disk.

  Please help me!

  TKS!

  TrungDV

  The issue is due to backplane having a bad rider on the expansion of the plant.  To correct this remove J15 the C2100 3.5 "bottom of basket, or backplane C2100 2.5 J7".  Refer to the below pictures to help locate the jumpers.

  3.5 "

  

  2.5 "

  

  Let me know if this helps solve the problem.

• Is it possible to migrate an application and drop one of the three types of plans?

  Migrating applications is 11.1.1.3 to 11.1.2.2.300.  Try to migrate an application and a company wants to only 2 of the 3 types of regime to be brought back.  Is there a way to do this?  Or to remove or hide the type of 11.1.2.2.300 if all 3 are migrated on?

  Here is what has been tried, but he cuased a problem in the DB:

  • Migrate an existing application that originally had 3 types of plan. Plan dropped type 1 and kept plan types 2 and 3
  • Created 2 types of plan when creating the application in 11.1.2.2
  • Initially built the contour using 11.1.1.3 LCM export dimensions and had to modify the XML to import. Edited plan 2 and made this plan type 1. Edited plan 3 and made this plan type 2. Had problems with the LCM/xml and finally finished by using the extractor contour and loading by using the outlineload utility. Dimensions are now based.
  • Initially, wrong Bishop Calc. To change the value of the hsp_systemcfg for the type of plan table = 2 instead of 3 as it was in the table.
  • Calc Mgr shows that type of plan 2 and no plan to type 1.

  Any ideas?

  Probably the best way to rebuild the application and then reload the hierarchies or hack files XML of LCM, if 11.1.2.3 then you would be able to create/delete plan types.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• RAID 5 performance problem

  Hello

  I am not very savvy storage but I have a performance problem, and I don't know where to look...

  I have 2 x Esx 4 server, are twice as much HP Proliant dl380 G5 with local storage

  first to have 8 x 146 g in raid 5 and I can receive 70000 Kbps

  Second 4 x 300 g in raid 5 and I can only had 10000 Kbps

  The first is 7 times faster why?

  The battery allows to use write cache. There is the huge performance without cache enabled writable. I don't think that you can activate the cache in writing on these controllers without the battery. Without a battery and the cache in write on you would trash your VMDK if the power is out or you did a hard power down.

• Adding a new 3rd SAS 300 GB disk for ESX 3.5

  What I have:

  1 Dell R160 - ESX 3.5 Server

  2. two hard disks 300 GB SAS - RAID 0 (I need not redundancy)

  3. 2 300 GB drives form 1 Virtual Disk capacity VD0 about 580 GB

  Requirement:

  Now, I bought a new SAS 300 GB HD which I want to add to the already existing ESX configuration. I want this 300 GB for the 2nd (MON) datastore again so that I can create a few more VMs on this data store. I don't want to re - install ESX installation complete (if possible)

  What I tried:

  1. a way that I can create a new ramdisk on this 3rd 300 GB SAS HD so that I can add it to the ESX via VM Infrastructure Client data store. -Does not work: (.) Also simple plug-and-play of the drive does not work as the ESX is not able to scan the HD if I simply just add it on the drive and run ESX

  I am a newbie so please let me know if you guys need more info to solve my prob.

  Thank you.

  Vik

  SAS - Ready 300

  This drive must be online.

  Create a new VD using RAID0

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• How long does take to dismantle and re-scan a single data store

  Hi all

  I am currently using vSphere 5.0 to manage 3 x 5 ESXi hosts. I am trying to use the host VM 2 for surebackup data store and virtual laboratory of Veeam. I had already used the same data store and removed. Now try when I set up again on the same data store, it generates the error Create NAS Datastore - specified key, the name or the identifier already exists.

  After reading about the issue, I've seen the way to solve this must dismantle and Reanalyze the data store that produces the error. As I've never done this before that I was wondering if someone could share their own experiences? I need to move the exisitng s VM from the data store before I have to dismount and perform a new analysis or any point throughout this process?

  Some details on the data store:

  Composed of disks SAS 4 x 300 GB in RAID 5 with a total of 831,50 Gb. There are 8 VM running on this server using 400 GB on the Go 831,50. 4 virtual machine are essential and must be operational during the time leading to opening (9 - 5.30 pm). These total 222 + 39 + 33 + 69 = 363 GB. The data store is not shared between hosts.

  The migration of virtual machine for the other guests, I'm able to estimate (if necessary). What I'm really interested in is the length of time that it will dismantle and Reanalyze the data in question store.

  Any help would be much appreciated.

  Thanks in advance.

  Kind regards

  Haydn

  You must move the virtual machines before you take it apart

  or close the virtual machine and to unsubscribe to esxi.

  given that the data store is not shared, you must do the migration of data store for virtual machines such as migration cold.

  Disassemble and analyze new shouldn't take more time, let's say less than 2 minutes if each works fine.

• After 5 months of use... "You must allow replacing existing data to start using this device"

  I currently have a very disturbing system status:

  "You must allow replacing the existing data to begin to use this appliance.

  "Are you sure you want to overwrite existing data?"

  The unit shall be set up a 8TB ix4 - 300 d in RAID (I forgot the number). I am still able to access and read / write from the network, and as far as I know that no other messages indicate that none of the drives failed.

  How can I solve it without risking the 2 TB of data? What happens if I click on OK?

  Hi whitby,.

  The first thing I recommend you to do is backup your data even if it is still available and you can access and read/write to the device. Your unit is probably in RAID 5 because this is the default value for the device. With RAID 5, you can lose a single drive and be able to continue to access your data, but if another hard drive were to fail, your data will be lost and you need data recovery.

  Once your data is backed up on a second location, you should be fine to replace the existing data and to rebuild the RAID. The real problem is that the drive is most likely a failure and it will be replaced soon. If you are covered by the warranty, I would recommend contacting technical support to send in a log dump so they can get more information from device to see if the hard drive needs to be replaced. The warranty covers the replacement of the hard disk. Otherwise, you will need to get a replacement of the hard disk that is the same manufacturer, speed, and as long as the original disks.

• "initialization failed. Windows Boot Manager"is displayed when starting, but no problem boot OS.

  The error 'failed to start. Windows Boot Manager"appears every time when the PC starts, but the operating system still works and everything seems to work very well.

  My system is installed with Windows Server 2008 Standard 32-bit with two 146 GB RAID 1 SAS hard drive and a hard drive of 300 GB in RAID 0.

  Hello Rieze,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2008 and would be better suited to the technet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• PowerEdge R320 - S110 PERC upgrade to PERC H710

  I installed a H710 PERC integrated in my R320, which originally shipped with the S110 PERC.  The controller recognizes the 2nd virtual disk, but not the first, which is the boot drive.  It just shows that the 2 discs unconfigured.  Both work very well when I plug the cable into the S110.  What Miss me?

  Thank you

  John

  Hello

  Between the S110 and H710 RAID migration is not supported. You will need create new virtual disks on the H710.

  Thank you

• EquipmentMissing after the UCS to 2.2

  Environment: 2 x FI6296; 2 x 5108 with 6 B200M3 each. All servers have the local drive to 2 x 300 GB SAS, RAID 1.

  After the update to 2.2, one of the servers indicates that local disks are missing (both). Invertory lists 0 records in the server. Two faults messages "Missing equipment", code 1256, gravity: info are displayed in the errors tab.

  Operating system is running, no problem.

  I have the same problem, 8 of my servers of B200M3 indicates that the local drive are missing, but the servers have not all drives the.

• Switch the disk in servers without losing content

  Hello

  Need to change the hardware of server on a couple of servers and wanted to just change disks, and if all goes well he wouldn't be able to start on the new server.
  But this isn't the case :(

  I took 2 disks (RAID 1) of a UCS B200M3 and put it in a B200M2 UCS, but everything was gone in the disks when I started the server.
  There is no policy of scrub applied on any of the servers.

  How I did it, was that I've disabled 2 servers, (B200M3 - Windows and B200M2 - ESXi) and separated from Service profile. So I swapped the drives and associated Services profiles again (now: B200M3 - ESXi and B200M2 - Windows)

  None of the servers worked when I started again.

  If all understand what I tried to do, please help, if there is a way to do this.

  Concerning

  Stig

  Hi Stig,

  The reason why you have lost data from your hard drive in because as you move them between a M2 a M3 blade. These blades do not use the same raid controller, so it is expected that you will lose data. Not only that, as explained in the below installation guide raid migration (go to hard drive installation section) between the blades M1, M2 and M3 is not supported. Please let me know if you have any questions.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/HW/blade-Serv...