Cannot boot from disc or USB on Ideapad Z710

Similar Questions

• cannot boot from windows dvd/usb

  cannot start windows from dvd or usb. I was installing windows on my destop I formatted my c:\ drive to install windows suddenly halfway so that installation was in progress the process collapsed and abandons a pop' unable to retrieve file ' since cannot start windows from dvd or usb. eveytime a screen

  Windows could not start. recent hardware or software change might be the cause. to solve the problem
  1. Insert your windows installation disc, and then you restart the computer
  2. choose your language settings, and then click Next
  3. click Repair on you computer.
  status-0x000000f
  Info: the boot device has failed because a required device is not accessible.
  whenever I have use installation dics, I end up with this after a few blinks of small line on black screen after restart
   
  also tried usb Boot I just get a black scree after reboot.

  Thanks BearPup for the reply. I was finally able to install ubuntu via the usb port. I was unable to do so earlier because my web cam was still attached to my key USB only. I removed it and then finally installed ubuntu relief. now I will install windows.

• Satellite L - cannot boot from disc of Windows 7 32 bit

  When trying to install the 32-bit version of Windows 7 from the cd/dvd that came with my computer noting happens.
  I inserted the cd and restart the computer, but the installation does not start.

  The computer is running windows 7 64 bit I want to change to 32 bit

  Hello

  You can boot from another drive? Maybe that Windows 7 is noisy and so it can t be read correctly.
  Check this box!

  If you want to downgrade from 64 bit to 32 bit you do a fresh install. This means that you need to clean your current Windows partition so backup all files first!

• Satellite L870D - cannot boot from CD or USB

  This is my new laptop Satellite L870D of girlfriends, I'm trying to back up the hard disk with Paragon Image Backup for Windows 8. I created a bootable CD and a version of the the company Paragon software USB drive but I can't start either on this laptop. Both times I cause a message ' media check: Fail.

  However, Paragon bootable CD and USB drive boots fine on another system. And the optical drive on the L870D Satellite works very well in Windows 8.
  I also checked the BIOS for boot speed setting which is set to Normal.

  What Miss me?
  TIA.

  No, the UEFI BIOS is created to win 8 and if you need to use the other system like Win 7 or a Linux distribution, you will need to disable UEFI BIOS and secure boot.

• Satellite Pro P100 - cannot boot from external USB DVD

  My internal DVD player on my Toshiba Satellite Pro P100 failed, and my windows is broken.
  So I bought an external DVD drive to boot from, so I can recover the system using the product recovery DVD.

  Now, he actually goes ahead and starts from the DVD. But once in the setup it gives me the message: "ERROR: file Setenv.ini D:\Setenv.ini or X:\Tools\Setenv.ini not found!

  So I went ahead and checked if the file was... it was... but it is on Drive E:\ (probably because it's a USB device I'm starting from)

  -J' did some research and found that I needed to run the command: X:\tools\recogui /FE: say the recovery my files were actually on drive E:-which has helped a little... until I got a new error where it was always looking for the *. TPA file on drive D: eventhough I have via recogui had specified otherwise.

  Now what do I do to understand everything is to the recoveryprocedure on drive E: and not D:, as he seems to think?

  As I am in the middle of a period of review, quick response would be GREATLY appreciated :)

  Bad new boyfriend!
  Boot from external DVD USB drive is NOT possible!

  You can start only from the inside, ODD, HARD, LAN disk and external USB FDD (floppy)

  Greetings

• Satellite A200 - cannot boot from the recovery disc - code 1

  I have Vista business and my laptop is running slow and is full of rubbish.
  I have in the past used my drive recovery to completely re - install vista and start from a fresh version.

  However, I tried this once and it says that it cannot boot from cd - code 1.

  Can someone tell me what it is and how to reinstall vista?

  Hmm. strange.
  Are you sure you have the right recovery disk?
  Are you abele to boot using another drive as MS Win XP CD or Linux CD bootable?

• Cannot boot from Win 8.1 installation disk

  My mother has a Dimension 3000 system that works under XP and now I am trying to install WIndows 8.1 so that she can use banking online again. The problem is that it does not start from the installation disc.

  I have upgrade BIOS A03 and update all drivers using the driver Booster 2. Now the system is set at the first start of the CD-ROM, then HARD drive but it ends to always boot from the HARD drive. I'm at about 400 km, so I'll try to help him by phone. I tested for a start from the disc on my own XP and haven't had any problem so the drive is fine. I also ran the upgrade on its system Wizard, and everything was fine.

  I don't understand what is wrong, no matter who?

  bgtb

  Thank you. OK, so the problem is dimensions 3000 cannot boot from a DVD, only a CD?

  Since that she already bought (32-bit OEM) license and opened it, I doubt it will be returned, so I would try to make work in all cases, if that doesn't work I'll have to get a new PC.

  If copy us the contents of the DVD on a USB maybe we can boot from that? I'll give you a call tonight.

  The system is 10 years old... BIOS A00 - August 2004. The latest version of the BIOS is 8 years old February 2006. This system may be too old to be able to boot from USB.

  Other problems exist, the standard installed memory was of 0.5 to 1 GB, 1 GB is minimum requirements so it may also need to be upgraded.

  As mentioned in the video, Intel 82865 G is not supported by Intel for Windows Vista or later. For Vista/7, there are a few things that you can use so that it can work, but even then not very much. It will only use the generic driver for Windows 8.1 and the screen will be blurred.

  In addition, the systems hard drive is IDE and probable with a low capacity. The hard drive being the most likely component to fail and this type is no longer under production.

  So at least you'll need a DVD player, probably some memory and a video card. Even in this case the system doesn't always works well. I recommend wasting money in upgrading such an old machine. For the price of all these improvements, you can buy an OptiPlex 760/780 opportunity on eBay that come with a license of Windows 7. As you have already purchased the Windows 8.1, you could same source on an OptiPlex 745/755 and use your Windows 8.1 this license. All these systems will perform much better than the Dimension 3000.

  Of course, you can also look to a new system, the new Dell Inspiron is very cheap and can be done for $230:

  http://www.Dell.com/us/p/Inspiron-3646-small-desktop/PD?OC=fdcwnt7101h&model_id=Inspiron-3646-small-desktop

  While it is a low-end model compared to the Dimension 3000, it is a significant improvement.

• HP Pavilion 500-210 QE cannot boot from any hard drive.

  Good evening. As you can see on the subject, my computer just cannot boot from any hard disk that I put on it. I tried swapping the power supply, SATA cable, reset the BIOS, allowing the start legacy, changing to AHCI to IDE and RAID...

  When I get to the BIOS Setup, I see the hard drive and its features, but it will not start or show when I am trying to install a new OS. I'm not an expert, but I think that the problem could be in the motherboard SATA ports, but I'm not sure. Just to be sure, I tried another harddrive and it did not work as well.

  I was also thinking to buy a HDD external and installation of my OS on it, but I don't even know if it is possible and I would really like to have my computer working again.

  Thank you for your attention!

  Ok. That doesn't say that it is very likely that the motherboard has problems.

  Contact HP for warranty repair.

• 3490CT: is is possible to boot from the CD USB drive?

  While I read in this forum that it is not possible to start a ct 3049 since an external USB CD drive, I read elsewhere on the web (I can find is no longer the link) it is possible to boot from a USB CD drive as long as it's an Iomega brand player.

  Can anyone confirm on deny for me please?

  Hello

  You can boot from the external USB CD drive, but you need a supported drive.
  Please also check this topic on the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=944&MessageID=2086#2086

  Good bye

• Portege 3480: is it impossible to boot from a key-USB-cd?

  I would like to install win 2000 on my portege 3480. However, I have a lot of difficulty getting to boot from external cd readers. I tried with a Cd Player and a LiteOn DVD drive iomega. None of them works. The two drives are connected via the USB port. I read somewhere that we can start using pcmcia on the 3480 cd players - can that really be true?

  Hope someone can help out me.

  Thank you

  Steffen - Denmark

  Yes, it's true
  Generally it is not possible to boot from the external USB CD/DVD drive.
  You need a compatible PCMCIA reader and supported.

  Please check other messages of the forum in this category:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18540
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18417

• SA30-414 boot from the floppy USB drive

  Hi all!

  I'm tryin to get my my satellite A30-414 to boot from the floppy USB drive and enter the dos mode, but all I get is a black screen (without a slider, of course!), and then the windows XP login page directly. Can you tell me if this model has a boot device menu shortcut keyboard?

  Also, I may be permanently changed some configurations of starting (to know by pressing F12 at startup, then press F2 to try later) with my attempts to get the machine to boot from the floppy drive: now even when the floppy drive is not connected, I get this black screen awkward and then, after a few seconds, the logon windows page. How do I access the Setup menu and check?

  Thank you in advance for your help!

  Hello

  You can access the start menu by pressing the F2 key during the boot process. This will take you in the "setup" menu where you can change the order of selection of boot device as well as the other BIOS settings permanently.

  Kind regards

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.

• Satellite A100-906 cannot boot from CD

  Hello

  I have Satellite A100-906 and can not boot from the CD. I have not now what problem.

  I want recovery my pc, but do not boot cd and I tried another CD of Windows and seems to be a problem.

  I get a DVD Super Multi drive _usb_ but does not have same problem.

  BIOS tool is default.

  Please FEM answer me

  thanx

  Hello

  You said that you are using a USB DVD Super Multi Player?

  Sorry, buddy, but I think that you will not be able to boot from the external USB CD/DVD drive
  AFAIK BIOS doesn t support this!

  You must use the use of the internal CD/DVD drive if you want to boot from the disk!

  Welcome them

• My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

  I have Windows 8 is installed and an iso of Windows 8.1 on my USB.

  My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

  When you upgrade to 8.1 Windows it will replace your Windows 8.0. The only way I know to have both is to buy a copy of Windows 8.1 and install on another partition or drive.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• T5810 precision what USB port must use to boot from a bootable USB key

  My Precision T5810 has two USB 2.0 ports and 4 ports USB 3.0 in the back and another 3 USB 2.0 and a USB 3.0 to the front ports. (these are controlled by 2 x Intel C610 series/99 X chipset USB controllers for USB 2.0 ports and host controller enhancedhost expandable Intel USB 3.0 for 3.0 ports)

  I have the ability to boot from a device of USB storage, for example in the trunk once () menu. Which ports USB should I use so eager to boot from a bootable (USB stick) USB flash drive?

  It is an example for which I would like to make this BIOS update using a USB bootable BACK. instead of doing so using methods of Windows System.

  Probably is not serious. It will be either boot or not. Pretty easy to test...

  Obviously, a USB2 drive will operate as if connected to a port USB3 even USB2.

  Connect the USB bootable for the front to turn port if it is recognized as a boot option F12 menu.