4215 interface problems

Similar Questions

• PPCC 20141 interface problems

  Hi all.

  After I updated Premiere Pro to the new version of 20141 interface seems inflated and I lost space for monitors and the timeline, etc..

  Old version:

  

  New version:

  

  There are also other problems such as the playhead changes thickness as it plays along the timeline and it shows the space between clips on the timeline with zoom.

  Interface problem - YouTube

  I have similar problems in Media Encoder, After Effects and hearing, but not in Speedgrade.

  I have:

  1: tried to change the playback to the software only, engine instead of GPU accelerated.

  2: update the graphics drivers.

  3: renamed the Adobe old_Adobe folder

  4: on and off the PPP phasing display in the properties of windows for first.

  My specs are:

  8.1 Windows laptop

  1920 x 1080 screen

  Intel Core I7-4710MQ

  NVIDIA Geforce GTX 870M

  Any ideas on how to solve these problems are welcome!

  Thanks in advance.

  Hi Arjun.

  I found a solution to my problem in this thread: update after installation first CC and work surface icons became too big and can't be change in small

  Thank you.

  Martin

• YouTube interface problem

  Hey,.

  While I was with Youtube on Safari, it changed recently for this interface.

  

  I already disabled AdBlock for this area.

  I think he may have changed when I downloaded Youtube Center, although I did not change any settings.

  I didn't uncheck DASH-buffer, but I have put it back on.

  Is there someone with the same problem, or someone who can help me solve this problem?

  Thank you

  Brent

  This is a bug. Send feedback to Apple:

  http://www.Apple.com/feedback/

• Speech recognition - recognition language is not language User Interface problem

  I want to get Windows 7 speech recognition to work with British English, but I get an error after the training, that the language of the speech recognition is does not match the language of the user interface. I got the thing defined in the locale UK and speech recognition in British English. Several people have suggested:

  • Change regional settings, restart, change back again, reboot. Does not...
  • Turning off the box that says look at my documents. Does not solve.
  • make a Windows 7 reinstall. Can't do like no Windows 7 no install disc came with the PC.

  Can someone help me solve this problem? Where is the language of the User Interface set? Would - this something to do with Office 2010?

  There is anecdotal evidence that the use of like CCleaner registry cleaners can cause this problem.

  Speech recognition Windows 7 CCleaner
  http://Forum.Piriform.com/index.php?showtopic=21936

  Speech recognition could not start because the configuration of the language is not supported. The recognizer language must match the language of the user interface.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/5ba2cf1b-E97D-46d7-924D-b14007581786

  Have you contacted the manufacturer of your machine to see what the repair and the machine has recovery options?  Maybe he has a hidden recovery that is quite common nowadays for the OEM partition?  This should be mentioned in the manual or on their Web site.

• Troubleshooting of the IDS 4215 interface detection

  Hello!

  I am deploying IDS4215 with interface of remote sensing (Fa0/1) connected to the SPAN Cat3750 Gig1/0/1 interface.

  The problem is the following. The ID works for a while (I am able to view alerts and States 'show int' Fa0/1 located upward). Then after awhile Fa0/1 goes down, I don't know why.

  The Cat3750 shows that State of Gig1/0/1 passes the "follow-up" to "notconnect. All I can do is restart IDS.

  Catalyst shows no error on the interface.

  I am a novice in ID, and I appreciate any idea where to start troubleshooting.

  Thanks in advance!

  SSM

  Catalyst settings:

  GigabitEthernet1/0/1 interface

  Span ID description

  full duplex

  Speed 100

  end

  control interface of the session 1 source article gi1/0/27 - 28

  control interface of the session 1 source Gi2/0/27 - 28

  control interface of destination session 1 item in gi1/0/1

  Config of IDS:

  ! ------------------------------

  ! Version 5.1 (1)

  ! Current configuration changed the game 22 dec 10:11:22 2005

  ! ------------------------------

  service interface

  Physics-interface FastEthernet0/0

  automatic duplex

  automatic speed

  output

  Physics-interface FastEthernet0/1

  FE0/1 description

  Admin-state enabled

  full duplex

  Speed 100

  output

  output

  ! ------------------------------

  service-analysis engine

  vs0 virtual sensor

  Physics-interface FastEthernet0/1

  output

  output

  In my view, that there is something seriously wrong with version 5.1 (1). Why Cisco continues to allow users to download is beyond comprehension. I will be rebuild about 20 sensors today because of this problem. I have rebuilt 6 sensors Friday [from an ISO image, models 4235,4240,4255] and let them run this weekend. 5 out of 6 have the sensor interface down once again.

• The switch Catalyst 3560 G Web Interface problem

  Hello

  I have a problem with my switch to Cisco Catalyst 3560 G. The web interface does not work (I tried IE11, IE6, Chrome, Firefox, and Safari).

  There is only displayed icons but no text:

  Cisco.jpg

  

  To try to solve the problem, I have updated the switch to its latest version of IOS (from 12.2 (55) to 12.2 SE7 (55) SE9). But the problem persists

  WS-C3560G-48TS 12.2 SE9 (55) C3560-IPBASEK9-M

  In the configuration, the web server is enabled:
  IP http server
  IP http secure server

  What can I do?

  Thank you

  Best regards
  Fabien

  Hello Fabien,

  I think I found the problem and a workaround for this.

  The problem comes from the language of the webbrowser.

  I got exactly the same problem with the same model with the same version of IOS.

  I checked with the debugging tools in firefox and I find the browser want to get (firefox in french for my case) 2 scripts:

  http:///fr/charset.js

  http:///fr/re_preflight.js

  But there isn't any record of en flash: / C3560...

  So I changed the preferred language in firefox (put English first). Reload the Web page and it works very well ;)

  I hope this will help you

  Thank you

  Jeremy

• VCo workflow to clone a virtual machine of centos. Network interface problem

  Hello

  I use vco workflows to clone a virtual machine of vcenter. The virtual machine is running centos 6.0. When cloning is complete. I see the network eth0 and eth1 interfaces set correctly the static gateway ip and address information I provided. I deleted the 70 - persistent - net .rules on the basic vm form which I clone. So, I get the correct interface names. But when vm powers on and I run "ifconfig eth0" I don't see the IP address of this interface has all the details.  same for the other interface also.

  But if I do a system restart network without changes to networking and then do an ifconfig I see the IP with the previous information.   I don't know why the service network restart is necessary so that he can recognize the ip address.

  Any ideas what I could do wrong. or to avoid this manual step of the execution of the service network restart command on the creation of the vm.

  Thank you

  Kiran

  Yes I'm restarting after after the application of customization.

  Has been able to solve the problem... In CentOS, the network service does not work by default. This is why it does not have network interfaces at startup. So now the machine instant, I started the network services and stop the Network Manager service

  using chkconfig network on

  chkconfig NetworkManager off

  and then cloned from this virtual machine... and apply the customization settings. during the start now it shows the interfaces properly without needing a service restart

• vCops Web Interface - user interface problems

  Hi all

  Any who have relevΘ the UI bugs in vCenter Operation Manager 5.7, the dashboard tab appears for example and the weird user interface.

  I downloaded the file of vmware eggs and installed twice with the correct license.

  Any ideas?

  

  I see only when I have a problem with the license. Or vcops lost license number

  Frank

• Configuration host network interface problem

  Hello

  I use vmware player on Windows 7 Pro.

  After the upgrade to vmware server. I am not able to use the guest only network interface.

  In the configuration interface tcp/ip v4 network, the IP address is 192.168.38.1, but if I run ipconfig, IP assigned to vmnet 1 is 169.254.x.x (invalid IP)

  Anyone has an idea on how to solve it?

  Thank you!

  CESC

  After the upgrade to vmware server

  Just an info, Windows 7 is not a host for VMware Server operating system.

  I am not able to use the guest only network interface. In the configuration interface tcp/ip v4 network, the IP address is 192.168.38.1, but if I run ipconfig, IP assigned to vmnet 1 is 169.254.x.x (invalid IP)

  Unfortunately starting with VMware Player 3, without a valid reason, I've never seen explained, VMware has stopped installing the virtual network Editor.  What I would try to solve the problem is to install manually and then use the restore default in the virtual network Editor to try to fix any problem with network cards virtual VMware.

  ==========

  To install the missing virtual network Editor, the command prompt:

  VMware-player-*.exe -e c:\vmptmp
  

  Then in the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually 'C:\Program VMware Player' or ' C:\Program Files (x 86) \VMware\VMware Player.  You can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily.  Note: there are some for all the files to be extracted to then access the network.cab file.

  Post edited by: WoodyZ - posted: July 5, 2012 09:10

• Update the user interface problems

  I have an application that has three buttons at the top of the other, but is never visible at a time.  On the initial configuration of the application, the user interface is correct, but once one of the clicked button events fire several buttons appear at the same time.  All buttons are dynamicslly created and stored in a table to access.

  A few snippits of code:

  The buttons are created like that and then added to a canvas:

  
  browseButton.label = "Browse";
  browseButton.id = trackNumber.toString ();
  browseButton.width = 92;
  browseButton.height = 30;
  browseButton.setStyle ("right", 0);
  browseButton.addEventListener (MouseEvent.CLICK, fileRef_browseHandler);

  
  removeButton.label = 'delete ';
  removeButton.id = trackNumber.toString ();
  removeButton.width = 92;
  removeButton.height = 30;
  removeButton.setStyle ("right", 0);
  removeButton.addEventListener (MouseEvent.CLICK, removeButton_clickHandler);

  
  clearButton.label = "clear";
  clearButton.id = trackNumber.toString ();
  clearButton.width = 92;
  clearButton.height = 30;
  clearButton.setStyle ("right", 0);
  clearButton.addEventListener (MouseEvent.CLICK, clearButton_clickHandler);

  canvasButtons.addChild (removeButton);
  canvasButtons.addChild (browseButton);
  canvasButtons.addChild (clearButton);
  canvasButtons.horizontalScrollPolicy = 'off ';

  Pretty easy.  Where the problem occurs is removeButton_clickHandler.  It passes through and hides all buttons and makes the Browse button active thus active / disable another image.  Turns on and off the visibility making:

  public void HideFileButton(currentButton:Button):void {}
  currentButton.setVisible (false);
  } / / HideFileButton (Button)

  public void ShowFileButton(currentButton:Button):void {}
  currentButton.setVisible (true);
  } / / ShowFileButton (Button)

  I see that the visible property is changing, but the UI is not hide the buttons that are no longer visible.  I got around this origin by setting the alpha to 0, but it seems I'm missing something simple.

  Can anyone shed light on what I'm missing?

  In general, you define the button visible = false immediately except the one you want to be visible.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• External Interface problem

  I get the call from the external Interface to work in Safari and Firefox, but not IE 7.
  
  ActionScript
  
  var image: String = String (ExternalInterface.call("saveglobalscore",score) ("getImg"));
  
  JavaScript
  
  < script >
  IMG = "billboard/subpages/become_sub.jpg"; var
  
  function getImg()}
  return img;
  
  }
  < /script >
  
  
  
  

  I found the problem, it seems that the generated code from dreamweaver when seal Flash does not IE load external data. So I exported the code in Flash, and now it works.

• software interface problem with "Band in a box."

  s PG music "band in a box" software having problem with El Capitan 10.11.3 operation?

  FWIF it there a number of Mac Audio products who do not appear as 10.11.x and normally I would say that the developers have months to understand, but there is only tools 10.11 maybe the question that companies like Line 6 the whispers have blogs of developer who said they worked with Apple but do not have a satisfactory solution. In the meantime, see if your product needs an update and that you are running a compatible version, otherwise consider do backward to a previous state of the BONE where the software worked properly if you have a backup Time Machine to restore from available for you.

  Use Time Machine to back up or restore your Mac - Apple Support

• LaserJet 4000: HP LaserJet 4000 web interface problems

  I have an HP LaserJet 4000 very old but still very functional.  When I try remotely inside through the web interface to change settings, the screen does not load correctly.

  It wants to load a JAVA runtime and I have the latest version of loaded oracle, but there must be an incompatibility.  I think that it only works with a very old runtime.  I have tried with different browsers such as firefox and chrome, but the result is much the same.

  Y at - it solution or a firmware update or something to fix this?

  You have the 600n jet direct card and the issues are known.  I think that windows 95 was the last os that could communicate and give you the web page.  You could try to download the latest firmware for your jet direct card and update its firmware using hp download managere, but to be honest I don't think it will work.  The saving grace is that you can make any changes you want in the control panel of the printer.  Just navigate the EIO menu on the printer and go through the menus.  A little more difficult, but it can be done.  Good luck.

• Hover of the user interface problem

  Hi, my site a 8 sections, I'm applying modal and UI & LI, the problem is when the mouse over the outline of color to color of yellow in the image box & cyan is coming. How can I disable for only this section. screenshot & web link is given below

  WEBLINK

  

  You will need to respond to the event img:hover to set transparent background

  To remove the outline or the border just to target img

• programming of interface problem chart uefi in vmware8

  Hi all

  After you run the codes listed as follows, the screen display:

  "MaxMode 29, Mode 3, 1024 * 768.

  After pressing a button, the screen was allowed to black, then nothing has changed until you exit the program.

  Anyone know the reason? Thank you very much.

  ***************************************************************************

  status = gBS--> (OpenProtocol)
  GST-> ConsoleOutHandle,
  & gEfiGraphicsOutputProtocolGuid,
  (VOID *) & graphicsOutput,.
  gImageHandle,
  NULL,
  EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL
  );

  If (!.) EFI_ERROR (status)

  {

  Print (L "MaxMode %d, %d, % d*%d\r\n Mode",

  graphicsOutput-> Mode-> MaxMode, graphicsOutput-> Mode-> Mode,

  graphicsOutput-> Mode-> Info-> HorizontalResolution, graphicsOutput-> Mode-> Info-> VerticalResolution);

  getch();

  //...

  query mode...

  g_VgaModeNumber = 2, 800 * 600, 32-bit

  status = graphicsOutput-> SetMode (graphicsOutput, g_VgaModeNumber);

  If (!.) EFI_ERROR (status)

  {

  for (i = 0; i < 3; i ++)

  {

  Color. Red = (i == 0)? 200: 0;

  Color. Green = (I == 1)? 200: 0;

  Color. Blue = (I == 2)? 200: 0;

  Color. Reserved = 0;

  status = graphicsOutput-> Blt (graphicsOutput, & color, EfiBltVideoFill, 0,0, i * 10, i * 10, 200, 200, 0);

  If (EFI_ERROR (State))

  {

  Print (L "Blt failed with error 0x%x\r\n", status);

  }

  getch();

  }

  }

  }

  any help will be appericate.

  guzheng

  Hi guzhengand welcome to the VMware communities!

  You may need to use gBS--> LocateProtocol (...) to find an instance of EFI_CONSOLE_CONTROL_PROTOCOL and use it to change the mode of EfiConsoleControlScreenGraphics.  We are implementing our ConSplitter Console control protocol, and mode you get to start depends on the selected for the virtual machine guest OS type.

  The Console control protocol interface definition is not in the EDK2 code base, so if you use EDK2 you will need to track down the definition of interface yourself, which is pretty easy - go to your favorite search engine and look for "EFI_CONSOLE_CONTROL_PROTOCOL".

  See you soon,.

  --

  Darius