435 HP laptop: HP 435 wireless button will switch

[ARE]

Hoy sacked el disco duro mi HP 435 of 500 GB (con Windows 7 Ultimate 32bits) sin hacer nada mas y the way UN disco duro 1 TB virgen y instale Windows 7 Ultimate 64 bit, instale todos los drivers proporcionados por aca, sin embargo HP me con against a problema al instalar los tratar WLAN drivers y bluetooth ne me already instalarlos, are as if the wlan estuviese desconectada tarjeta, pero is Québec no uso el of're asi porque cuando do disco duro el anterior wifi y el bluetooth how, además el boton para encender communication between the card y el SO no works

[EN]

Today, I took the hard drive of my HP 435 500 GB (with Windows 7 Ultimate 32 bit) without doing what more and I just put a blank 1 TB harddrive and install Windows 7 Ultimate 64 bit, install all drivers provided by HP here, but I ran into a problem when you try to install the drivers for the WIFI and Bluetooth , me not let install, it's like wireless network card have been disconnected, but it is not the case because when I use the old disk hard wifi and bluetooth works, also the wireless button does not work (is always orange)

Installation - the bluetooth hardware must be enabled to run this installation

Well, I just solved it installation drivers prevention they are the only ones that I have not tried to install xD

Tags: Notebooks

Similar Questions

  • Laptop - 15-an050ca: Wireless project will not be displayed on the smart TV Samsung

    Hello

    First assignment in time!

    I have a Samsung smart TV which has mirror display operation. I also have a smart phone of S6 that connects directly to my TV. Unfortunately I can not for the life of figure me out how to connect my laptop. I followed the instructions to use the projection screen and he finds the TV. I click on the found device and it says its connected but all television broadcasts is "loading" in the upper corner.

    As I said that the phone works if I know the TV works. Y at - it something I am doing wrong by trying to connect to the TV.

    Any help would be really appreciated!

    Thank you!

    Hi @stu70,

    Please become a member of the HP's Support Forums. I understand that you have a problem with the connection from the computer to the TV. I'll be happy to help you.

    You can connect to the computer, the TV with an HDMI cable. In the display configuration, you can mirror or extend the screen.

    Here's a site I found that you are tempted to do. It will be useful.

    How to connect a PC to a Samsung Smart Hub

    Please keep me informed of the progress of things.

    If you need help, let me know and I will gladly make all that I can to help you.

    Please let me know if that solves the problem by marking this post as "accept as a Solution.
    To simply say thank you, click the Thumbs up below!

    Thank you.

  • HP laptop model g080nr: f12 button wireless stay orange won' find the wireless network

    After a update HP laptop does not connect to my wireless home button stay orange and I can't find my owner's manual to see what buttons to push with f12 to activate WiFi again, any help would be appreicated.

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    Looks like you're not able to connect to the network wirelessly with your laptop

    Please read the tips and the steps below, find out what is relevant to your current situation and try

    by performing a few steps which could help solve the question

    1. check that the led wireless, try to turn on the wireless by pressing the wireless button

    2. check if Wireless [WLAN] is enabled in the BIOS

    3. check if you have yellow "!" mark or red ' x' for Wireless Adapter in Device Manager

    Note: make a right click on the adapter, uninstall the driver and restart the device [Windows will load the drivers again]

    4. check the last time wireless worked fine and perform system restore, reset the BIOS default setup

    pressing the F10 key in BIOS

    5. power OFF the Unit, remove the AC adapter / CC & battery, press and hold the Power button for 1 minute

    6. you can also download and install the last update of the BIOS for the unit on the Site of HP Support

    7 uninstall drivers Wireless Device Manager again, and this time download and re-install the drivers of

    the HP's Support Site

    8. If you use HP Wireless Assistant on your device, please uninstall the same and re-install again

    9. check if your wireless card detects any other nearby wireless network it, in this case delete existing wireless

    Profile and recreate the same

    10 incase if these steps does not resolve the problem, you can try removing and reinstalling the card group wireless

    Note: Please do this step only if you are comfortable doing

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the white button on the right to say thank you Thumbs Up *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

    My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

    Hi Tinkerbellfancolorado,

    1. When is this last work fine?
    2. Do you receive an error message or error codes?
    3. Recent changes on the computer?

    There could be several causes for this problem.

    Try starting with these methods.

    Method 1

    Step 1

    1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
    2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
    3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

    Step 2

    Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

    1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
    2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. On the Networking tab, click Configure.
    4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Method 2

    Temporarily disable the firewall, and check the status.

    NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Hope that was heloful.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • The left button, scroll, zoom 5 x does not at all for the optical mouse for laptop Microsoft 4000 wireless

    Original title: laptop microsoft 4000 wireless optical mouse (1000 dpi) responding left button, scrolling, 5 x zoom works quite... tried to change the batteries, installed the app again and again and all, but do not get any results.

    the left button, scroll, zoom 5 x works at all... tried to change the batteries, installed the app again and again and all, but do not get any results.

    I noticed that if I press those buttons problematic that the laser is not blink / works as like other work button done.

    (tried mousinfo in program files, on the left the button does not)

    I thought to open for cleaning before I found you I can send help or advice...

    What should I do?

    far I could found the exit of microsoft or repair center

    I liked the 5 X zoom option which miss me most...

    Microsoft wireless notebook optical Mouse-mouse 4000 (1000 dpi)

    very appreciated

    Hello Rabbi,

    1. you remember to make changes to the computer before this problem?

    2 have you tried the mouse on another computer?

    Method 1:

    Alternatively, you can try to uninstall and reinstall the mouse and check if that helps:

    a. Click Start, point to settings and then click Control Panel.

    b. double-click system click on hardware and then click Device Manager.

    c. click on the PLUS SIGN to expand unit

    d. double-click on the mouse driver.

    e. tab driver, click on uninstall

    f. restart the computer and check

    See the following article:

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    http://support.Microsoft.com/kb/838398

    Method 2:

    If the problem persists, test the mouse on another computer in a different environment. If you can replicate the problem in a different environment, you have a defective unit. If this is the case, see the section "More information" for more information on how to contact Microsoft Supplemental Parts for a replacement unit.

    See the following article:

    Troubleshoot a wireless mouse that does not correctly

    http://support.Microsoft.com/kb/321122

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Laptop Pavilion dv6-3118sa wireless button & button mute don't work once installed windows 8.1

    I just installed windows on my Compaq Notebook Pavilion dv6-3118sa 8.1 and my wireless button and button mute does not work anymore can I do to make it work again?

    Hello

    Try the IDT driver on the link below.

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59654.exe

    Kind regards

    DP - K

  • Envy of HP dv7-7332ea: having problems to install the driver of HP wireless button

    Hi all

    I would really appreciate some help here. Recently, I did a factory rest on my laptop dv7 HP Envy but can't reinstall Windows 10.

    Before doing this, I was told that I need updates of Windows 8 to 8.1, and then to Windows 10.

    However, I am unable to Al of Windows 8 to 8.1 Windows I'm not all the drivers installed.

    For some reason, I am unable to install the driver of HP wireless button. Whenever I try to download through Windows Update in Control Panel, it downloads and after installation displays an error code 80070436.

    I am unable to get this driver installed and therefore cannot be updated to Windows 8.1. I tried to update to 8.1 without the driver, but my laptop is restarted it got stuck at 82%.

    I would be grateful if someone could give me some advice or help get this sort I seem to keep hitting a brick wall.

    Thank you very much

    Ian :-)

    You are the very welcome.

    You will be able to install W10 directly without the need to spend any other OS.

    I did it several times already, so I know it works.

    Twice on nine discs in a solid state on laptops that had previously been W10 on the old mechanical hard disks.

  • Pavilion dv6 - 7 k: HP wireless button not working not!

    Sorry, my bad English!
    I use a laptop A3E82AV product name. After upgrading 8.1 wireless F12 key does not work when I hibernate & resume. If I retart or shutdow, it works normally. When I was with Windows 7 (OEM), it worked normally.

    I am currently using the latest version of the driver for HP wireless button 1.1.2.1

    Anyone have a same problem with me? pls help. Thank you!

    Hi @ANTRAN2106 ,

    Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion Notebook dv6-7000 and issues with the F12 key after and 8.1 of Windows upgrade. This is a link toHP Quick Launch software. It is under Software Solutions on your driver page.

    It will help with the F12 key.

    Make sure that all updates have been met with Windows it is under change PC settings. It is enough to click on the Windows key and start typing the laptop settings.

    I hope this helps with the wireless button.

    Thank you.

  • Mode turns off plane but wifi does not, the rest orange wireless button

    I am runnng Windows 8 on a HP Pavilion g4. I've been a play a game with turned off wifi, wired lan wire and battery, mode high performance. The game crashed, I turned off the laptop with power button. After the reboot it and trying to use wifi, I realized that by pressing the wireless button could show "airplane mode" on the screen but it would turn blue, or the wifi turn.

    After that, I tried a system restore, by repairing the existing drivers, check the BIOS and a hard reset by taking the battery, press the button for 30 seconds and then go back to the top. None of these methods have worked so far.

    Any help will be appreciated.

    Hey, thanks a lot for your help. I found the solution.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/wifi-stays-off-after-turning-off-airplane-mode/527f9644-CED1-480C-AD01-87b8597f0cac

  • Pavilion DV6 6c14nr: Wireless button does not work

    Has taken the plung and improved my DV6 Win10 laptop to see how it works.  Had to do a clean install, because no upgrade would not work.

    After installation, the wireless button does not work.  LED stays red all the time, and when I push it, it activates / deactivates the airplane mode.

    Check the support site HP for this PC, downloaded and installed the driver wireless Win8 button (sp59835) and it does not work. Button LED stays red.

    Searched these forums and found another driver (sp64043) from the button for Win10 wireless driver and installed it.  Still does not work.

    Information on equipment is: ACPI\HPQ6001\2 & daba3ff & 0

    The details for the wireless button said drivers this devide requires additional installation

    Unless I can get the wireless button to work, I'll be forced to go back to Win7.

    Help, please.

    UPDATED - so others find this post know what works!

    Restored image backup Win7.

    Disconnected the LAN cable and activated the wireless button.

    Win7 removed and properly installed Win10.

    Wireless button works NOW!

    So basically, if the wireless is turned off before the Win10 install, it remains disabled and then nothing will allow it.

  • HP pavilion dm4-2180 wireless button does not illuminate

    Following this element thead (http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-pavilion-dm4-2180-bezel-repl... I ended up going in a store of the local computer where they fixed the problem of the screen. I have it powered by the store and everything seemed ok, just that when I got home realized that the wireless button does.

    Checked well the post on the forum about similar issues, but may not know what the problem is.

    1. default bios does not resolve the problem

    2. the correction with hard power the laptop, remove the battery and pressing the power button for 30 seconds to drain the capacitors nor

    3. the button is always orange, if I press it for a few seconds, the message "unrecognized usb device" is displayed

    4. the wireless adapter does not appear in Device Manager, or I get the error message on the current arrangements (only on the unknown device in the usb controllers)

    Is it possible that is a material error, when technicians open the computer the wireless card has not properly been connected?

    Hello @PedroAAndrade,

    Welcome to the Forums of HP Support!

    I came across your post about the WiFi problem and wanted to help!

    It is possible that the problem may be hardware related.  You can try to check the WLAN Module, to see if it properly connected.  You can use this guide to help you, if necessary:

    HP Pavilion dm4 Entertainment PC - Maintenance and Service of Guide (Chapter 4, Page 40-42).

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • On G50 wireless Assistant will not remain after update

    The button on my G50 network assistant will switch is off.  If pressed, it seems to work.  A restoration of the system, fixed it for awhile, but I think tht an update he killed again. What should do?

    Perform a hard reset on the phone. To perform a hard reset, follow the steps below.

    • Disconnect the power adapter from the laptop.
    • Remove the battery from the laptop compartment.
    • Disconnect external devices or devices connected to the laptop. Press and hold the power button for about 15 seconds

    The wireless button is a toggle ON / OFF button and yellow light means its JUDGMENT and white light indicates its WE. There is no need to press and hold, instead, simply press once on it.

  • Wireless button remains orange. Lights on.

    Hi there, I'm having some problems with my laptop recently. The wireless won't turn on no and stays out of little matter how many times I press the button of the wireless switch which is above the keyboard, remaining always this color orange relics indicating that the wireless is disabled.

    Number and name of the product: Compaq Presario CQ50-215 - 215 CA

    Operating system: Windows Vista 32 - bit OEM

    (As appropriate) error message : error no. a little. First time I press the wireless button, the popup Assistant wireless HP says "WLAN: Off '. I have a second time and wrote "WLAN: Disabled" and the cycle repeats when I press on it a bunch of times.

    Any changes made to your system before the issue occurred: that's what I think the problem is a few days before my wireless doesn't work anymore, I had my battery disconnected and just running off the AC adapter. My father accidentally disconnected my AC while it was spend vacuuming the living room. At the STATION, I got a cmos checksum error message. Computer started normally with an incorrect time/date in the bios, but at the time when internet was still functioning. Fast forward to a few days later, my wireless and then stops working.

    Other info/Thins, I tried

    -J' I goto manage network connections-> there is a red x on my wireless network connection icon but on click right he said he his 'active' with only the option to disable. Click on diagnose and he said: "on this computer's wireless capability is turned off."

    -J' I goto the Atheros AR5007 802. 11 b / g WiFi adapter properties screen and the device status says "this device is working properly.

    -I go into the Device Manager and theres no "!" or whatever it is on my network cards.

    -Tried to get into the bios and see if there was something on my adapter wireless that has been disabled, but the only thing I could find was an option in the boot order allowing to map internal network starts when the laptop starts. Tried to activate / deactivate options, and nothing really happened.

    -I can still take an ethernet cable and I work ok on my Wired internet.

    -Tried to uninstall the driver/restart the computer. Upon restart, it reinstalled the drivers but the wireless still won't turn.

    At this point, for me, it seems that it is a hardware problem and kinda outta luck. Had this laptop about 3 years and a little really need yet for the school. Can anyone suggest what I can still check/fix?

    try to reinstall your wireless card... thiscould help to make...

  • Pavilion DV7-1451nr: Wireless button stays amber

    My pavilion dv7-1451nr turns wireless keyboard blue when I have to reset the motherboard by removing the battery and press the power button / stop seconds, after which I plug in charger to him while leaving the battery and press the power button / stop. After that, I would like to press f10 to enter the bios setup, then I would like to load the defaults, save and exit.

    After doing all that I have explained above, the wireless button becomes blue and wireless assistant would be activated and indicates that the wireless is turned on. If I check in the Device Manager, I see the hardware details and driver wireless populated it and everything should work fine, but once I restart the computer, the wireless button would refuse to start. There is orange. If I try to check the State of the material status and driver WLAN on Device Manager, they would be is more filled it more and wireless assistant will refuse to start. If by chance he started, this would indicate that the wireless is turned off by the Device Manager.

    I had tried uninstalling the wireless LAN driver and reinstalled just in case the problem came from the software side but not solution. Just this afternoon, I have decoupled from the computer and removed the card WLAN, dusted it and replace it back, but the problem persists.

    The type of wireless network card is Atheros AR5007 802.11 b/g WiFi adapter. I noticed something this afternoon, however, after having checked the service manual for the computer, I realized that there is specific types of the wireless card compatible for specific regions. For example, the number of appropriate wlan spare parts which must be on my computer is 582564-002 and have this with references with the number of spare part of wlan on the wireless card available on my computer that begins with sps 452..., I realized something was wrong. I'll leave that to stop you guys from HP, but I really need a solution to this problem very fast because it's really annoying me. Thank you.

    Hello @LL_Cool_J,

    Thanks for the information!

    I don't know what you mean, when he asked if the model is 50xx or 40xx. Confirming the WLAN Module is a little difficult, because there are several manuals maintenance for this model.  I was able to refine the selection a bit, by comparing the numbers of spare part for hard drives.  Based on this REPAIR, the WLAN Modules you have listed, 582564-002, 593836-001, must be compatible.  However, I don't see the Atheros as option in this manual.  To be on the safe side, you can contact our telephone support HP.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Re: Satellite L450D - 13 X - is it normal that the wireless light will be red?

    I recently bought a Satellite L450D - 13 X laptop and have just noticed that the led of the wireless system is red.
    I have a 100% a good range wireless connectivity using my BT home hub v2a.
    Is it normal that the wireless light will be red, or should it be green like the others?

    Van
    Delete.

    Hello

    Seeing the Wlan can be ON or OFF. It does not change the color!
    WLAN LED tells you the State of WLan.
    If the light is red while this means that WLan is ON.
    If the light is OFF then the WiFi network is disabled.

    Welcome them

Maybe you are looking for