4500ps: 4500PS 84.11:01 no Visible jam

Similar Questions

• Range of printers all in one HP C4280

  Photosmart C4280 all-in-one - changed the ink cartridge and print alignment page but now paper RSS to halfway and get message that says transport jam. No visible jam. Following video instructions to reset and hard reset.  Cleaned all the reels twice and still the same.

  You are welcome.  I wish that would work for you.  You have tried everything in the document of solving problems, but nothing did.

  The only other thing I can think of would be to do a complete reset of semi.  If successful, this reset the default printer and clear the memory.  If the printer was on a wireless network, it should be removed and would need to be reconnected.  If you want to try this, I can send you the steps in a private message to your Forums HP box.  I need you agree to not post the stages.  Let me know what you decide.

• DesignJet 4500ps: is the interchangeable motherboard for DesignJet 4000 and DesignJet 4500PS

  I recently received a model of HP DesignJet 4500 PS broken free Q1272A of friend engineering firm.  The technician, they called to set the printer has assumed that the motherboard (main PCA card) was incorrect and removed.  I don't know anything else other that they decided that it wasn't worth fixing, and the main Board of the APC is missing.

  I think I can get a main PCA Board used for a few hundred dollars, but I have to check that get the right part.  I see the number of room Q1273-60250 being announced as the Designjet 4000 and Designjet 4500.  Can anyone confirm that this is true?  I don't want to buy this part number if it turns out that the Q1273-60250 works only in the DesignJet 4500 if I change it or if I'm just using some accessories.  I also see Q1273-60225 as being for the Designjet 4000 and Designjet 4500.  I found this part number cost very little.  It will work in fact for the 4500ps?

  Any advice?

  Where can I go to be safe?

  Hello

  The 4500 and 4000 share the same hand APC.

  The Q1273-60250 part should work.

  Best regards

  Mike G

• Photosmart HP 6520 series: paper paper jam?

  I got the series HP Photosmart 6520 for Christmas.  While I'm still not sure how to get my Macbook pro to recognize it... my daughter was able to use it with an application on his phone.  We test printed a few things and it works beautifully.  So the next time he said a paper jam.  We removed the paper does nto seem to be stuck.  Always says paper jam.  Don't know how to fix a paper jam, when there is no paper in it.  Can someone please advise?

  Hi Aziz,.

  I'm sorry that you are having a problem with your Photosmart 6520 new.  Please see this document for assistance.

  Sometimes there is no jammed paper and the printer just needs to be reset.  Other times it IS paper stuck somewhere that is not visible.  The document that I joined you through all these instances and should get you operational return!

  I hope this helps!

• HP Officejet 6700: Paper jam - still a piece of paper glued and invisible

  During printing paper jam... I got about half of the paper off, however the piece missing (s) is not visible.  I tried to turn on / off power several times and keep getting a "problem with the printer or ink system...» Ox61000016

  Hello

  You mention you have tried to access better in paper space.

  Here is a link to the support page for the series 6700 JO printer that has a video explaining how to clear paper jams.  It may be useful.

  http://support.HP.com/IE-en/product/HP-OfficeJet-6700-premium-e-all-in-one-printer-series---H711/4322971/document/c03079119/

• HP Officejett Pro 8600: paper jam

  I have a paper jam and I cannot fix it after viewing the video of HP.  The paper is visible from the front and after removal of the duplexer.  The book seems to be tightly wound around the roller.  I can't go out fron the front and it's wrapper around the roll, when I look at the back.  Any suggestions?

  Dottie

  Hey @Dottie11,

  I see that you have some problems with a paper jam in your 8600 e-all-in-one printer Officejet. I can help you with that, but it is not a lot that can be done in this situation.

  If the printer is still under warranty, I suggest to contact the HP Support by clicking on this link and fill out the form below.

  If the printer is out of warranty, the best I can do is suggest more strength or cutting paper with scissors. Those who are not HP recommended troubleshooting steps and HP can not guaranteed that they will help with the jam, but it's the best I can do.

  Please let me know the results after following the above. If you clear the jam or come up with a solution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• 6510 all-in-one printer 211: 6510 has suddenly paper jams paper

  Paper jams are continuous. The upper part of each leaf has a 1/6 "dent about 1/2" long and 3-4 "on the side. Another paper has same type of damage. Will be removed all paper crowded at the top of the machine. Decided that there must be a mechanical problem and removed the 7 screws of the plastic on the bottom clamp to remove the bowl. When he was abducted some plastic black 11/16 "long with a 7/16 diameter gear on each end is out. The tree has a hole inside had to an axle. I sought visible signs where it may be at the bottom without success. I need advice before I go into it any further.  Thanks in advance for any help.

  Hello

  IAM afraid, you may need to replace the printer.

  Call HP Tech Support 1-800-474-6836 (USA)

  If your printer's warranty, you can be equipped with options of recovery.

• HP ENVY 4500: Jam of transport

  Hello

  My Hp envy 4500 printer keeps 'jam of transport. " There is no visible sign when I opened the cover, and I don't know what to do. I really need to fix to print my homework of girls today.

  Thank you

  Hi @DeanPhillips,

  Welcome to the Forums of HP Support!

  I understand that you are unable to get rid of the 'jam transport' message on your HP ENVY 4500 printer. I will definitely do my best to help you.

  I would like to try the steps in this guide, a Message appears 'transport Jam' HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

  This document will help you determine if there is an obstruction causing the carriage jam message, or if there is a mechanical failure in the printer.

  • If these steps solved the problem and the page print test, you can stop troubleshooting.

• OfficeJet Pro 8620: In the ADF paper jam - cannot get rid of error messgae

  Took the new Office Jet out of the box, put in place. Works wirelessly. I am getting a paper jam in the ADF error message.  Never fed any paper in the ADF.  I have reset the printer, firmware reloaded... can't erase the message.  Printing and scanning using computer or iPhone, just can cannot copy.

  Hi all

  I found this on the discussion Forum and it worked!

  Thank you John Ablordeppey of Ghana, West Africa, and Markus_M

  Suggestion of John fixed the error on my JO 8620, too.

  I was able to do it without removing the left cover.

  Just open the cartridge door, have a flashlight and check all visible cables, pressing them firmly into the connectors.

  Thanks to you two! ChrisDz

• Jam of transport on C7180 all-in-One

  I had an all-in-one operation until I tried to remove a paper jam.  After removing most of the paper to the back by following the instructions, I noticed a few pieces under one of the rolls and had to use a pair of tweezers to remove from the front. I am stil a message 'clear jam of transport' and the printer does not stop correctly. Before that, the only snafu was that the printer would not always print "fast draft" of some Web sites.

  So far, I tried to disonnecting the printer and insepecting of the front and back. I can't see scraps of paper inside. Any ideas on something else I could try?

  Denny

  Success!

  To this document, has been the key. On one of the steps, I saw the carriage freely return movement to the left and then dock on the right. I moved and then gently it leaves and voila a piece quickly to the top of the paper became visible. I would have NEVER been able to find it without moving its position anchored to the right carriage return.

  http://support.HP.com/us-en/document/c00042632

• J3680: Paper jam problem

  I had a paper jam (not the first) and I removed the paper from the front of the printer. There was no sign of damage on the paper and it's stock, I used previously. Now, I have a warning visible paperless paper get stuck in the machine. Is there a way to reset the sensor?

  Hello! Welcome to the community of HP @PHRED96,

  I came across your post on paper jam issues you have with your Officejet J3680 and wanted to tender hand. I recommend first trying every step in the guide I posted for you below. If you have tried all the steps, please check your messages private to my absolute last suggestion, that you can try at your own risk. If my suggestions do not help to solve the problem, you will need a new unit altogether. I'll leave the HP below contact info if you want to contact them for your replacement options.

  I hope this information helps!

  A "paper jam" or "Original Jam" Message appears for HP Officejet J3600 all-in - One Printer Series

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Want 4500: Jam of transport (for no reason)

  I have had this desire of 4500 for about 18 months and has never had a single problem.  The other day, I'm going to do a photo paper print job, then I start to get a transport error Jam.  I carefully check transportation and ensured in that there is no obstacle, basically quite HP on instruction for transportation jams, and everything is in working order.  Once the error clears, the cartridges move to the left and right without any problem stopping on the left side of the printer and the error comes back.

  I repeat: IT IS No. OBSTRUCTIONS or JAM in THE PRINTER.

  There is NO visible reason why should I get a carriage jam error... especially when the carriage moves very well on its own.

  Edit: I read through other posts with people having the same problem but I have not found a single viable 'solution'.

  Is seems not to be a problem with the accumulation of aerosols or other problems that the cleaning cart broadband would solve.  I don't have any other ideas but ask one of HP support officers rush in this one.

• paper jam that never resolves

  I have a new Hewlett Packard LaserJet PRHewlett Packard LaserJet PRO 200 color M251NW wireless printer

  I was printing labels name and there was a paper jam. The machine is supposed to remove the back cover. We made, saw a tag name and removed. closed it back up and he said there is still a paper jam.  Tried of putting power off, unplug, and every time that it says jam is there. Whenthe restart unit there is a clicking sound... maybe like 8-15 clicks...

  No visible paper in the device or on the back or the other... Help.

  they have already sent a new printer

• HP Envy 4500 ~ transport Jam

  I just bought this printer. I'm trying to install it. I'm stuck after installing cartridges. The display shows 'transport Jam. The printer carriage cannot move... "I see no visible obstacles. I have taken the cartridges out and reinstalled several times. I unplugged and plugged the power cord several times for different durations. I'm about to make it. Help, please!

  My son came home and fixed my problem. I had to start him early, and he's got to work. Thanks for your help.

• officepro 8600I have: jam printer

  I can see the pieces of paper under the rollers which are visible through the front door.  However, they are too far back to grasp. I tried with a pair of tweezers to no result and work from the rear as well.

  Hello

  If you have tried all the steps above and you still have problems, you could tray holding a more rigid media piece (like a sheet of photographic media or card stock about the thickness of an index card - do not use the thick cardboard).  And see if you can feed through and clear jams.  If it will not feed exceeded stage stuck bits, you can try to unplug the unit and manually feeding the rigid sheet through the drain plug back.  Often, this will push some of the pieces of paper remaining through.

  I hope this helps.