Codian MCU 4505 content encryption is not possible

Similar Questions

• T3 with Codian MCU

  Is it possible to run a system of T3 with a Codian MCU.

  On Cisco Live in London one saw a new 53xx Codian MCU, anyone know if TIP will run on this new platform.

  Alex

  Sent by Cisco Support technique iPad App

  Hello

  It is possible to have the system T3 to a Codian MCU conference join.  But note that the experience and the type of diagram you see will be very different from when you use the telepresence server.

  With respect to the MCU, 53xx, I think that it does not support the TRICK.

• TMS 14.3.1 played not well with Codian MCU 4520 - bug?

  TMS 14.3.1

  Codian MCU 4.4 4520 (3.57)

  After upgrading from 14.3 to 14.3.1 MSDS that I find THAT TMS is no longer recognizing the Codian as being registered at a Registrar SIP (VCS - C x7.2.2) and active SIP server address is empty.

  As a result, it is no longer allow me to plan only calls SIP; that is to say:

  

  In the above Conference, participants at the Summit must be either H.323 or SIP, participating below place SIP (JabberVideo customer 'business'), as well as participating number 3 (customer 'free' JabberVideo).

  Before the upgrade, I've always had the choice of SIP, H.323, and if necessary, IP, now I have only the choice of H.323 and where appropriate, IP.

  Curiously, when using multi-way, it will connect to the customer external jabber.com as SIP - SIP, while in a scheduled call, he'll be H.323 - SIP and appeal in the VCS - E it actually displays H.323 - H.323.

  I have no problems with the old MPS800; Active listed address in TMS SIP server as per normal, and I can choose to H.323, SIP and IP.

  So, is this a bug?

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

  In the MCU configuration.xml, should say something like:

  user_name VCS.example.com"registrar_name =" example.com"="[email protected] / * /"/ >" "

  The field that is empty in your TMS screenshot ("Active SIP server address") must have been populated by proxy_name value in the confiuration.xml that I can see.

  EDIT: looks like we have made a code change in TMS 14.3.1 when it comes to check the address of the SIP server: in previous versions, read and used TMS 'registrar_name', but from 14.3.1, it reads and uses the "proxy_name" instead.

  Kjetil-

• 4510 question not enabled SIP Codian MCU

  Hello, my company sent me a Tandberg VCS and a Codian MCU 4510 to configure and test our video phones) SIP (based on.  The only problem is that they have not provided me with an activation key product yet.  I'm going to encounter problems, until I get the key?  Thanks in advance!

  Hello, Emery, the MCU is not functional until you get the key. Your company should be able to get that for you either partner having bought it from or directly from Cisco beginning with the account manager or systems engineer. Or you can try to send the serial number of [email protected] / * /

• Software update of MCU 4505

  To get back into the mix of things with our telepresence equipment and we have a MCU which is on an older version of software.  After downloading the new software MCU 4.5, I do just that if I update I will not lose one of my features enabled.  Our current version is 4.2 (1.46) version of software.  We have the following features enabled:

  1. Encryption
  2. Web conferences
  3. Activation of MCU 4505
  4. key feature of capacity 1080 p upgrade

  Looking at the docs online, doesn't look like I need anything that either step upgrade.  Already upgrades for my C40s since these option buttons do not disappear when you upgrade to a newer version, but was not sure of the MCU.  Any ideas would be great.

  Hi, Brandon

  Options keys do not disappear.

  Your current options keys remain valid with the new MCU software.

  BR Oleksandr

• Satellite Pro M70-113: not possible to write on CD - R and DVD-R

  Hello

  I have a Toshiba satellite pro m70-113 laptop.
  Playback problems:
  I'm unable to read cd - r. It's really strange that a few days earlier these CD - R have been reading very well on my drive.
  and when I click on the cd drive in my computer, an error dialog box shows and says f: is not accessible, incorrect function. Here's a screenshot of the error... :
  http://img64.imageshack.us/img64/9574/1bp3.jpg

  And when I try to read my DVD-R, a few times they read very well but sometimes it does not read and the drive LED is lit when it does not read the dvd - r.
  When it reads the DVD-R, the following error message comes: screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg

  Write problems:
  After getting reading problems, I tried to test my drive writable.
  And I found that I'm unable to write on cd - r. I used alcohol and Nero once but without success.

  Although the same content when it is burned to cd - rw, it is a success.
  I am able to burn successfully on a support DVD + RW 4 x with data amounting to close to 4.34 GB for DVD5...
  When I insert a DVD - R Virgin car doesn t detects it as a blank media and the keps LED on lighting constantly and if nero State doesn't detect my DVD even! I'm not able to write on my DVD-R media...

  In short: write to RWs is possible for both cd - r and dvd + RW not possible of writing on CD - R and DVD-R.

  Please help me.
  It is only 7 months since I bought this laptop and believe that there may be no other person on this planet who looks after the training better than me!
  Really, I have not much used this drive and never scratched/gradient/local support, only the Supermedium media inserted.

  Thank you

  Hello

  Well, based on your description it sounds like the drive cannot calibrate the lens and, therefore, it of not possible to read or write to these media.
  Usual it of not possible to fix this and the replacement drive is necessary.

  You can also consult the user manual. You will find a list with all supported and compatible media.

  I also found this topic in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13170&MessageID=48243

• Forcemore than two end points to use Codian MCU

  I have a lot of C90s, E20s, 150 points of termination. I wish that the conferences of two or more to always use the Codian MCU.

  Can I do this with model templates.participant conference, or elsewhere?

  It depends on the specificity.

  If you book these conferences, using TMS, then you need to configure your advanced conference Options.  "Use of the external MCU in routing" must be set to "Always, except for point to point" and "Favorite MCU Type in routing" must be set to "TANDBERG Codian MCU".

  If these are Ad - hoc conferences, then what you want is Multiway (i.e. Conference Factory).  However, this requires a VCS.  The Guide deployment of Multiway for more details.

  http://www.Tandberg.com/support/DL.php?id=1119&dir=Deployment_Guides&fn=Cisco_VCS_Multiway_Deployment_Guide_X5.PDF

  Series L (T150) endpoints may not trigger a Multiway call according to the docs, but which may have changed since the doc is a bit outdated now.  They can be attached to a Multiway call however (L6.0 or higher).  MXP requires F8.0 or higher.

  If no one who works for you, your only option is to configure the Codian to create a new ad hoc conference on incoming calls to the conferences of the unknown and then give your a prefix of Service H323 MCU so that all calls with this prefix will route to the MCU and start a conference by using this code.  Make sure that your parent model has digital ID H323 and SIP registration active.

  The Codian in itself is not able to force someone to use for Multisite; This seems to be what you might think from model issues.

• ASA 8.6 - l2l IPsec tunnel established - not possible to ping

  Hello world

  I have a problem of configuration of the CISCO ASA 5512-x (IOS 8.6).

  The IPsec tunnel is created between ASA and an another non-CISCO router (hereinafter "router"). I can send packets ping from router to ASA, but ASA is NOT able to meet these demands. Sending requests of ASA is also NOT possible.

  I'm trying to interconnect with the network 192.168.2.0/24 (CISCO, interface DMZ) premises and 192.168.3.0/24 (router).

  The CISCO ASA has a static public IP address. The router has a dynamic IP address, so I use the dynamic-map option...

  Here is the output of "show run":

  ---------------------------------------------------------------------------------------------------------------------------------------------

  ASA 1.0000 Version 2

  !

  ciscoasa hostname

  activate oBGOJTSctBcCGoTh encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface GigabitEthernet0/0

  nameif outside

  security-level 0

  address IP X.X.X.X 255.255.255.0

  !

  interface GigabitEthernet0/1

  nameif inside

  security-level 100

  the IP 192.168.0.1 255.255.255.0

  !

  interface GigabitEthernet0/2

  nameif DMZ

  security-level 50

  IP 192.168.2.1 255.255.255.0

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/5

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 192.168.1.1 255.255.255.0

  management only

  !

  passive FTP mode

  internal subnet object-

  192.168.0.0 subnet 255.255.255.0

  object Web Server external network-ip

  host Y.Y.Y.Y

  Network Web server object

  Home 192.168.2.100

  network vpn-local object - 192.168.2.0

  Subnet 192.168.2.0 255.255.255.0

  network vpn-remote object - 192.168.3.0

  subnet 192.168.3.0 255.255.255.0

  outside_acl list extended access permit tcp any object Web server

  outside_acl list extended access permit tcp any object webserver eq www

  access-list l2l-extensive list allowed ip, vpn-local - 192.168.2.0 vpn-remote object - 192.168.3.0

  dmz_acl access list extended icmp permitted an echo

  pager lines 24

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 DMZ

  management of MTU 1500

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT (DMZ, outside) static static vpn-local destination - 192.168.2.0 vpn-local - 192.168.2.0, 192.168.3.0 - remote control-vpn vpn-remote control - 192.168.3.0

  !

  internal subnet object-

  NAT dynamic interface (indoor, outdoor)

  Network Web server object

  NAT (DMZ, outside) Web-external-ip static tcp www www Server service

  Access-Group global dmz_acl

  Route outside 0.0.0.0 0.0.0.0 Z.Z.Z.Z 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  IKEv1 crypto ipsec transform-set ikev1-trans-set esp-3des esp-md5-hmac

  Crypto ipsec ikev2 proposal ipsec 3des-GNAT

  Esp 3des encryption protocol

  Esp integrity md5 Protocol

  Crypto dynamic-map dynMidgeMap 1 match l2l-address list

  Crypto dynamic-map dynMidgeMap 1 set pfs

  Crypto dynamic-map dynMidgeMap 1 set ikev1 ikev1-trans-set transform-set

  Crypto dynamic-map dynMidgeMap 1 set ikev2 ipsec-proposal 3des-GNAT

  Crypto dynamic-map dynMidgeMap 1 life span of seconds set association security 28800

  Crypto dynamic-map dynMidgeMap 1 the value reverse-road

  midgeMap 1 card crypto ipsec-isakmp dynamic dynMidgeMap

  midgeMap interface card crypto outside

  ISAKMP crypto identity hostname

  IKEv2 crypto policy 1

  3des encryption

  the md5 integrity

  Group 2

  FRP md5

  second life 86400

  Crypto ikev2 allow outside

  Crypto ikev1 allow outside

  IKEv1 crypto policy 1

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  management of 192.168.1.2 - dhcpd address 192.168.1.254

  enable dhcpd management

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal midgeTrialPol group policy

  attributes of the strategy of group midgeTrialPol

  L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2

  enable IPSec-udp

  tunnel-group midgeVpn type ipsec-l2l

  tunnel-group midgeVpn General-attributes

  Group Policy - by default-midgeTrialPol

  midgeVpn group of tunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  remote control-IKEv2 pre-shared-key authentication *.

  pre-shared-key authentication local IKEv2 *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:fa02572f9ff8add7bbfe622a4801e606

  : end

  ------------------------------------------------------------------------------------------------------------------------------

  X.X.X.X - ASA public IP

  Y.Y.Y.Y - a web server

  Z.Z.Z.Z - default gateway

  -------------------------------------------------------------------------------------------------------------------------------

  ASA PING:

  ciscoasa # ping DMZ 192.168.3.1

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 192.168.3.1, time-out is 2 seconds:

  ?????

  Success rate is 0% (0/5)

  PING from router (debug on CISCO):

  NAT ciscoasa #: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0

  NAT: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0

  NAT: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0

  Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 0 len = 40

  Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 1 len = 40

  Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 2 len = 40

  Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = len 3 = 40

  -------------------------------------------------------------------------------------------------------------------------------

  ciscoasa # show the road outside

  Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP

  D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone

  N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2

  E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP

  i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone

  * - candidate by default, U - static route by user, o - ODR

  P periodical downloaded static route

  Gateway of last resort is Z.Z.Z.Z to network 0.0.0.0

  C Z.Z.Z.0 255.255.255.0 is directly connected to the outside of the

  S 192.168.3.0 255.255.255.0 [1/0] via Z.Z.Z.Z, outdoors

  S * 0.0.0.0 0.0.0.0 [1/0] via Z.Z.Z.Z, outdoors

  -------------------------------------------------------------------------------------------------------------------------------

  Do you have an idea that I am wrong? Probably some bad NAT/ACL I suppose, but I could always find something only for 8.4 iOS and not 8.6... Perhaps and no doubt I already missed the configuration with the unwanted controls, but I've tried various things...

  Please, if you have an idea, let me know! Thank you very much!

  Hello

  I've never used "global" option in ACL, but it looks to be the origin of the problem. Cisco doc.

  "The global access rules are defined as a special ACL that is processed for each interface on the device for incoming traffic in the interface. Thus, although the ACL is configured once on the device, it acts as an ACL defined for Management In secondary interface-specific. (Global rules are always in the direction of In, never Out Management). "

  You ACL: access-list extended dmz_acl to any any icmp echo

  For example, when you launch the ASA, there is an echo response from the router on the external interface--> global can block.

  Then to initiate router, the ASA Launches echo-reply being blocked again.

  Try to add permit-response to echo as well.

  In addition, you can use both "inspect icmp" in world politics than the ACL.

  If none does not work, you can run another t-shoot with control packet - trace on SAA.

  THX

  MS

• Application of floor on Codian MCU

  Hi all

  I want to know the meaning of the events by Codian MCU log output when endpoint sent a request for floor.

  There are newspapers that I captured after that I sent a request floor MXP endpoint.

  Conference CONFERENCE Info 13959 29/07/2012 17:29:43.254 'Name of the Conference' - set floor participating 1272

  Participant of CONFERENCE Info 13960 29/07/2012 17:29:43.254 1272: grateful request floor

  13961 29/07/2012 17:29:43.299 CONFERENCE Info participant_message_fn 1272: request floor

  Could someone let me know what each line means?

  Best regards and thanks in advance

  Kotaro Hashimoto

  Hi Kotaro-san,

  Third line in the newspapers show the message, it is not sent by MCU.

  It shows the real message received by request IE MCU for floor.

  Not sure what is "fn" stands for.

  Kind regards

  Sagar

• Cannot connect to the Codian MCU 4550

  I have a client who has a 4550 Codian MCU.  They recently had their lines ISDN, replaced by the local Telco Co. and since then the admins MCU have not been able to connect to implement calls.  They can reach the web interface, but can not go further.  I had to try and telnet/ssh into the device and run a password admin clear command but couln t connect, giving them the return "connection refused".  I have them also trying the connection by default where they do not have reset it and it didn't work.  Is anyone in this forum know of another way to get with admin rights and rest the two other accounts?

  Hi Shane. Telnet or SSH is not available on these units. If they can't get into the unit with the admin password, then a console reset_config may be your best bet. Also do not know why change of ISDN lines would this Holy as these microcontrollers have no direct ISDN connections.

  VR
  Patrick

  Sent by Cisco Support technique Android app

• Highway X8.2.2, Changing default SIP Port for B2B calls is not possible

  Much of community support.

  I 10.5.1 (SU1) of CUCM and X8.2.2 Expressway.

  I have configured without VPN Jabber and B2B based on the Document calls "CVD-CollabEdgeUsingBE6000 - Apr14.pdf.

  everything worked fine for months, but after the upgrade of the X8.2.2 Express way B2B calls are no more work.

  After troubleshooting, I found the following:

  the DSF Guide tells me to change the default Port to 5061 to 5560 B2B calls because 5061 is also used for the integration of Jabber.

  When I look at my record of wirekshark I see cucm tries to connect to the port 5560 expressway, but after sending a SYN packet, cucm receives a RST packet.

  When I change back to the port of 5560 to 5061, everything works well again for B2B, but of course encrypted calls Jabber connection is not possible more.

  for me, it looks like a bug, but I found nothing on the 'Bug search' tool.

  I also tried to disable all Protection rules and I also have a firewall rule for Port 5560. I also tried to change the TCP Port to something different, 3999 for example. All this without success.

  Just a little look in the guide.

  Two caveats. First thing the guide explains unencrypted SIP - TCP connections, if you want to be aware that both sides use TCP or TLS. If you are using TLS certificates must be good as well.

  5560 isn't a port on the highway, this is the port for the trunk on CUCM.

  What do you see CUCM sending to Highway: 5560 Setup is not ok.

  The port of the highway will not be changed.

  If you look at page 30, he 5560 port is used for the "incoming Port *" and the bottom of page 31

  You can see that it uses the Expressway IP with port 5060.

  On the highway, you configure the area to port 5560 (page 34)

  And of course the firewall should also be ok.

  Please note messages posted under the stars below and set the thread if it's an answer!

• TC 7.3.1 not possible to install on endpoints

  Hello

  We ran into Bug CSCur63326 presentation question on / off with TC and MCU codec.

  According to the Bug, the problem came in TC7.2.1 and must be fixed in TC 7.3.1 which is downloadable since Tuesday.

  So, I downloaded the SW for a variety of endpoints that we have.

  Unfortunately, it is not possible to upgrade to this version, any version prior to, or what type.

  Once the SW is downloaded and the installation starts, it does not directly after:

  'Check the signature on the firmware image' begins. According to the "installimage.log" of the codec it says failure of the verification of signatures! »

  When I tried the same thing with my EX90, connected on the public internet behind a DSL router, verifying signature takes forever, but the update is successful.

  Someone at - it an idea?

  Best regards, hans

  Hi, check again you get the download software appropriate for your codecs. Even if they all run TC software, there are different flavors, so be sure that corresponds to the ID software (such as s52000).

• VCS-E calls directly to Codian MCU Auto standard

  How do I create rules of research on my E - VCS to route direct calls to its IP address or hostname to go in-house auto attendant Codian MCU--> my autoatendant has a 31 conference ID and we have 99 registered in my inner - VCS - C so 9931).  We had so many difficulties with external companies, connection using several addressing methods (VCS - eIP ##MCUmeetingID, or [email protected] / * /, whatever).  It is much easier to have external users, type an IP address and be dumped directly in the auto attendant and we can move everywhere where from there.  I don't know everything that the Alias Search and regex and replace the criteria and do not want to cause problems with external courses and Movi SIP calls that we use.  Need help.

  Hi, Frank.  My apologies.  X5.1.1, its under VCS Configuration > search rules > Configuration.  Should be the help alias section here.  Let me know how it turns out.

  VR

  Patrick

• Unable to find the system volume, reconfiguration is not possible

  Hi all

  When I use autonomous Vcentrer of conversion to convert windows 7 PC, I get the following error.

  ""Cannot find the system volume, reconfiguration is not possible".

  I use Windows 7 64-bit PC with PGP encryption.

  
  

  Please help me to solve this error.

  
  

  
  

  See you soon

  Kumar R
  

  No, do not all repair with VSS, because his race for your C: drive

  Now the main question: your firmware from the computer's BIOS or EFI (or EFI running in emulation of the BIOS)?

  Why I ask: when converter trying to reconfig machine (data is already copied) we found information BCD in place where it is stored to * EFI * machines, seems that it is false BCD and the converter cannot remedy this situation...

  As a workaround, you can locate on your source disk folder named EFI (C:\EFI) and rename or delete. (if somehow that this is related with PGP the best choice is to rename the folder).

  Then repeat the conversion.

  HTH

• How can I search all subjects in my guide? and if this is not possible, how do I get books have not not subjects with the same name?

  How can I search all subjects in my guide? and if this is not possible, how do I get books have not not subjects with the same name?

  "People need be able to find these without having to look inside each book TOC.

  Sorry, but I'm not a big fan or user of this sensitive arrangement "New kid on the block. Therefore, it may be that I am simply misunderstanding because I do not regularly use it. Of what you say, it seems to me that if you (or more precisely your users) are not able to click on the right side, where he says 'Getting Started' or 'List of Email Campaign' and see these topics open and view the content with search terms highlighted?

  Regarding the "bookmarks", those that are normally visible by the user and will be not viewable unless the name of the bookmark appears also as text within the topic. Although, if the two are different, you could probably get there by adding the name of the bookmark as a keyword search in the properties of the section.

  

  In any case, I feel that at this point, I can just be frustrating you and you may need someone else to try to help that probably better understand the issue.

  Sorry, I was not able to help.

  See you soon... Rick