M452: range of laserjet printers

Similar Questions

• HP Color LaserJet Pro M452: HP Color LaserJet Pro M452dn "menu access is disabled.

  We have a M452 Pro of LaserJet of color HP that we cannot administer.

  We have it connected to the network and can access his web page over https.  However, it does not accept one of our passwords.  The said password "password only, no user name.    The home page of the printer says "secured loan".

  We tried a factory reset via the touch screen but the LCD screen indicates 'Menu disabled access '.

  How can we do a this HP Color LaserJet Pro M452dn factory reset?

  Thank you

  Hello

  Restore to default settings does not delete the password on the unit

  You need to have a NVRAM (it will remove all the settings on the device as the IP network)

  Turn the printer off.
  2 2-line dashboard: press on and hold the right arrow button and the Cancel button
  at the same time. Hold depressed that you turn on the printer.
  Touchscreen control panels: turn on the printer, and as soon as the HP logo appears, press on the
  right lower quadrant of the control panel.
  3. when the Permanent storage Init. message appears on the screen, release the buttons (2 lines control
  panels) or a touch screen.
  The NVRAM initialization begins.
  4. when the printer has completed initialization of the NVRAM, it returns to the ready state.

  Or even another return to zero in the case wherever he continues with the same question

  1. turn off the printer.
  2 2-line dashboard: press and hold down the left arrow button and arrow key simultaneously.
  Hold depressed that you turn on the printer.
  Touchscreen control panels: turn on the printer, and as soon as the HP logo appears, press on the
  lower left quadrant of the control panel.
  3. when the Permanent storage Init. message appears on the screen, release the buttons (2 lines control
  panels) or a touchscreen...
  The super NVRAM initialization begins.
  4. when to initialize NVRAM super is finished, the printer goes into generic printer mode.

• all laserjet printers: print

  Hello, Mr President

  I used to win 7 ser professional pack 1, but I've upgraded internet 11 dose not print in ie11 all hp LaserJet printers, so please solution for this pro.

  Thank you

  Welcome to the HP Forums @Jeki,

  I read your post about how you are unable to print to your printer, LaserJet, from Internet Explorer 11 and wanted to tender hand with my suggestions.

  1. Please try to start printing and Dr. Scan to see if the tool can detect and repair potential conflicts to start: using Print and doctor Scan for Windows to help troubleshoot printer problems

  2. If you are unable to print from IE, try to uninstall and reinstall the printer on your computer to fix any issues printer driver.

  If you have trouble with the steps, let me know and I'll do my best to help. Also include what LaserJet model you have.

  Click the thumbs below up to say 'Thank you' & the 'accept as Solution"If the problem is resolved, please and thank you!

  All the best,

• hp2100tn: what is the difference, HP2100N or HP2100TN laserjet printers

  What is the difference, HP2100N or HP2100TN laserjet printers

  Hello and thank you for using the HP forums!

  To know the differences between the two printers, refer to the User Guide.

  Good luck!

• HP laserjet 2200dn printer range: Hp laserjet 2200dn driver and software

  I just want to find a software and driver for laserjet 2200dn printer

  question:

  the printer does not support windows 8.1, I want to know how it works?

  My Windows 8.1 Professional 64-bit system has built-in support for the LaserJet 2200 model:

  

  You may need to click the Windows Update button in the Add Printer dialog, then wait (possibly several minutes) while additional drivers are downloaded, until the list is filled again.

• Range of HP printers and classes

  I e fax in the past with no problems until this week, I get a message that says I must be on a network and I am on a network, all my tests say I'm connected, what happens?

  Darling

  Hi honey,

  To help you better, please answer these questions.

  1 operating system Windows are you running?

  2. What is the number of the HP printer model?

  3. is the printer on the domain network?

  4 did you do changes on the computer before the show?

  You can follow the provided methods to solve the problem.

  Method 1-

  I wish that you are running the fixit-

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Note: Do not run the fixit, if you have already tried.

  Method 2-

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers print.

  I wish that you disable the Windows Firewall as well the antivirus temporarily.

  View items-

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Make sure you re - activate the antivirus and firewall of Windows as the computer can be at risk of infection by the virus.

  Method 3-

  I would have you look at the article-

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• range of HP printers. I want to delete printing a document that is in progress

  I started printing something I want stop printing altogether.  I hit 'Cancel', but when I turned the printer back to print something else, the first document began to print again.  I don't know how to remove a printing process.

  Hello

  Please cacel the queue as follows.

  Turn the printer off.

  Then on your PC, on the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted when you turn on the printer.

  Kind regards

  DP - K

• HP LaserJet P2015dn printer range: printer LaserJet P2015 memory upgrade

  In HP "LaserJet P2015 [c00623611) series User Guide" which was packed with the printer, I learned that the memory upgrade chips are 100 pins minimum speed of 66 MHz.

  In HP HP Support Center "Printer LaserJet P2015 Series - specifications of the printer" I have been informed that the memory upgrade chips are 144 pins minimum speed of 66 MHz.

  What document of HP is correct?

  Aren't we glad the Boeing team who did as 747 you and I fly on doesn't have that same attitude on the correction of the inaccurate documents from 10 years. Programmers (I used a) and tech writers waste popping popcorn, drinking coffee and put on day of NCAA brackets in a day it would take to change all the various translations of a pdf most time.

  It is not surprising that HP stock has declined 80% in the last 4 years if the employee point of view prevailing.

  But thank you for the passage of my suggestion/request/grumble along their.

  I think we can close this discussion.

• Windows 8 Solutions for Laserjet, MFP printers, all-in-One and Scanjets

  To help customers to use their products with Windows 8 successfully, HP has identified the drivers recommended by product. Please see the following support documents for more information:

   

  LaserJet - printers, multifunction and all-in-one devices supported in Windows 8

  LaserJet and Color LaserJet - produced with care delayed in Windows 8

  ScanJet - Scanners supported in Windows 8

  LaserJet and Color LaserJet - printers, taken in charge or with limited Windows 8 Support

  LaserJet Color LaserJet and LaserJet AiOs/Multifunction - products not supported in Windows 8

  If you have a problem with the installation of your printer from Windows 8, please start a new thread and include your printer in the title of your post. Please, do not respond to this post. As new help documents are available, they will be posted on this subject.

  If the resources above do not meet your needs/questions or you need additional assistance, please visit:

  Additional resources that are available to help customers with their LaserJet printers, multifunction and all-in-one include:

  HP LaserJet and multifunction and each Color LaserJet - printers install the driver included in Windows 8 or Windows Update

• HP Laserjet 1025nw printers takes almost 6-7 seconds before its starts printing.

  Whenever I try to start printing a page, the printer takes a long time to print. I thought that the laserjet printers are the fastest online for excellent color prints. But the time it takes to print is increased by his initial work. What is the calibration that takes time? It calibrates whenever I print. Its ok for understand that it calibrates the cartridges on the first page. But I do not understand that if I take more copies of a single page (colored), let's say 20 copies, it calibrates for each page. I don't know how is it print speed is 4ppm. Can someone help me to solve the excessive issue of "calibration".

  Thank you

  Best regards

  Abdul Samad

  Hello, once again, Abdul.

  I saw his answers to my questions. I hope that means that you're enjoying the labor day weekend. I'll go ahead and provide the following information in any case.

  The following is based on my assumption that the answers to my previous questions were: Yes, the quality of printing of pages you print on the CP1025nw is good. and Yes, the printer prints 4 pages per minute (ppm).

  The sounds you hear and the time it takes to print the document likely color to reflect the normal operations of this printer.

  The print speed of this printer is rated at 17 ppm for black and 4ppm for color. The reason why the printing speed is much slower in color, it is that the print to the printer mechanism is a design of carousel, which means the cartridges for all four colors - black, magenta, cyan and yellow - are housed in a carousel. When printing in color, the printer rotates the carousel to give access for each Imaging drum cartridge so that the color can be provided on the page. The printer then cleans the drum and turn the carousel to the next color, where the process is repeated.

  So the noises you hear are the drum is cleaned, the carousel is turning to the next color, the color being scheduled, then the process repeats.

  Again, this is normal operation for this printer.

  If the print quality of the page is not good or the printer prints at speed lower than 4 ppm, please let me know. You should maybe contact the HP Support or send in your printer for the service.

  I hope this information helps, Abdul. Please let me know if there is anything else I can do for you.

  Ramuck

• Fixing a paper jam in the printer LaserJet 1020 range.

  From time to time I see members post questions with paper jams that occur in the LaserJet printers single function. I found a video that goes through the steps of a paper jam on a printer LaserJet 1020 of compensation.

  The video will cover the following steps:

  1. Transparent area of the print cartridge paper jam.
  2. Reset the printer.
  3. Reload the paper into the device.
  4. Adjust the print settings in the printer driver
  5. Clean the surfaces of the cartridge.

  I hope the community finds it useful and informative. Good impression!

• HP LaserJet P1102w: Windows 8.1 - run two different USB connected P1102w printers with simple shortcut on the desktop?

  I am trying to set up a single laptop Windows 8.1 for someone who uses it according to the seasons in two locations (FL and MY). I installed a HP LaserJet P1102w printer in each location. I wish I had a printer that is connected USB (one at a time will be connected) able to access in an only menu icon Office or file print command.

  When you add the second printer, Windows8.1 recocognized, the driver is already installed, he apparently recognizes the different addresses MAC and/or numbers of series of different printers and present second printer on the page devices and printers in Control Panel or allow a second printer on the desktop icon.  The only way to tell apart printers is that one is listed as a Hewlett-Packard LaserJet P1102w and the other is listed as a HP LaserJet P1102w. It is rather confusing to the elderly person who will be using the laptop.

  Is it possible to have the mobile exploit any printer is connected both by means of a simple print command or icon? Maybe by connecting via a WSD Port Monitor?

  Thanks for any help or advice!

  Dave Waters

  Hey @dmwaters138,

  Welcome to the Forums of HP Support!

  I understand that you do not want to have two HP LaserJet Pro P1102w printer operation via USB Wired on 1 single machine with a single order of printing or the icon. I would like to help you with the configuration of this option today. Because there are two distinct Laserjet on Windows 8.1 computer printers, to do two icons impression for various devices. The best way to tell the difference between the two devices is to rename printers. Thus, when the client goes in file and print in the print dialog window, simply choose the printer name that corresponds with the device they want to print to. You can rename printers all you want. Install printers on the WSD Port wireless network would give the same result of having two copies of the printer is installed on the computer. One thing I see, is that the name of the HP Laserjet Printer is unusual. It seems that your printers may be using the built in Windows drivers, rather than the HP Full Feature driver package for the device. This may cause printing conflicts in the future. Can I please you follow the steps below to set up and install both LaserJet HP correctly.

  Step 1: Remove the drivers:

  It is crucial that your HP LaserJet are using the correct HP driver package. So I'll have you remove two copies of your HP Laserjet of the computer. Please make sure that the USB cables are connected.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type devices and printers. Click on devices and printers
  3. In devices and Printers window please right click on the Hewlett-Packard Laserjet and select delete device or delete. Once this copy is a party, please right click on the HP Laserjet P1102w and select 'remove device' for this one as well. After have removed two copies of the Laserjet please close devices and printers.
  4. Then, on the Start screen type programs and features. Click on programs and features to launch the window
  5. Scroll the list of programs and find the HP Laserjet driver package. If you see the HP Laserjet printers select Uninstall. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install devices:

  1. Please leave unplugged USB cables

  2. Please click here to download the package full feature software and driver for the HP Laserjet Printer

  3. when the download is complete, please follow the instructions on the screen to install the first Laserjet. Make sure you select the 'install the printer software ' tab connect the USB cable only when the installation window prompts to.

  

  4. Once installation is complete for the first printer, please open the Start screen and type devices and printers.

  5. once the devices and printers opens, you will see the first copy you installed HP Laserjet. Please right click on the HP Laserjet Printer , and then select printer properties

  

  6. under printer properties , you will see the name of the printer on the general tab at the top. Please rename the printer to something that the customer acknowledges that this first printer. Then click on apply and then OK to save the changes.

  

  7. close devices and printers

  8 open the Start screen again. This time, type run. Click on Run to launch the run dialogue box.

  9. in the run box type %temp% , and then click OK. The Temp folder is now open

  10. in the Temp folder to locate the 7z... file. Click this folder to open it. This is the HP Installer package for HP Laserjet printers. Scroll to the bottom of this file and double left click on the P1100_P1560_P1600.exe driver package. The installation program will now open.

  

  11. in the title of the installation window, select "Add another printer. Don't connect not the USB at the moment. Click Next.

  

  12 connect the USB cable for the second printer once the installation window invites you to. After the second installation, please open the Start screen.

  13. in the start screen, type devices and printers. Click on devices and printers to open the window.

  14. in the printers and devices window, you will now see a second copy of your HP Laserjet. Right-click on the new copy and left click on properties of the printer. When the Properties window opens please rename the second copy of your printer. Click on apply then OK to save the changes.

  

  15. close devices and printers

  When the customer print, in the print dialog window they will just now to choose the name of the printer that fits the HP Laserjet Printer they wish to print to.

  

  I know that sounds like a lot of steps, but I wanted to give you as much detail as possible to ensure that this process goes well for you.

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• Cannot install HP LaserJet printer

  Original title - installation of the program

  The only program that I tried to install so far is the range of HP LaserJet printers. I did what the instructions but nothing helped, PLEASE help

  Hello

  Try asking your question in the Support Forum of HP printer.

  They will give you all the assistance you need.

  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  See you soon.

• Reference Dell D10S: Software 451dn Laserjet Pro 400 has error during installation.

  LaserJet works fine when plugged in to USB, but now moved to a place wireless. The software will not work.

  I tried install printer Win 10: "the pilot is not available.
  Tried to uninstall the universal printer driver, restart, reinstall the HP driver, error (without code).

  HP Print doctor can find the device downloads the latest version, but it crashes every time (error, no codes).

  Win 10 can see the printer... it is therefore in the range wireless.

  I tried all the software different packaging to win 10 on HP site... all get an error during installation.

  Here's what worked.  I downloaded the universal print driver from HP.  These installed to their default location.  Taking note of where they have installed.

  Then, 10 Windows, try installing the printer laserjet Pro 400.  "Missing drivers".<- this="" is="" an="" important="" step.=""  leave="" the="" printer="" icon="">

  Then go to control panel, small icons.  Device Manager.  Search for printers, find the Laserjet printers.
  Right-click and choose update drivers.  Do not update automatically.  Choose the manual option.

  Look for the universal printer driver.  Wait a minute... BOOM.  All right.  Printing of all wireless PC and laptop.

• Color LaserJet MFP M177fw Pro: installation of web services blocked to 'connection '.

  I'm trying to enable Web Services on this new LaserJet.  I am in the built-in Web Server page and the configuration of Web Services tab.  I clicked on 'Turn on' and it just keeps spinning in connection...

  DNS is 8888 and 8844

  All the other tabs work; It is connected to the computer and the Internet.  Help please?

  Thank you!

  Hi @crowndude,

  I see that you have problems with Web Services. I want to help you.

  I have provided a few steps to try to see if we can solve this problem.

  Turn off IPv6 on the printer.

  Go to configuration, network configuration, network, IPv6 Services and turn it off.

  This DNS works better for Laserjet printers. Please change the settings to see if this will help the printer built-in Web server.

  Preferred DNS address: 209.244.0.3
  Auxiliary DNS address: 209.244.0.4

  Power cycle the printer.

  If you still have questions, please continue with the following steps:

  Update the firmware of the printer by a USB connection. HP Color LaserJet Pro MFP Firmware update M177fw.

  Configure a static IP address for the printer. Proceed to Solution 3: printer of the assign a static IP address.

  Printer HP Color LaserJet Pro MFP M177fw and HP LaserJet Pro MFP M127fw and M128fw printers - printer does not keep the Wi - Fi connection.

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.