5200 help all-in-one wireless

Similar Questions

• Impossible to install my new HP Deskjet 3545 printer all-in-one wireless

  I bought the printer HP Deskjet 3545, printer all-in-one wireless on August 13, 2014. When I tried to install the printer for USB connection after downloading the software from the CD provided with the product, it displays the message... "" Cannot install hardware, module HP Deskjet series 3540 is not found. ""  Help, please

  Problem solved.  Problem was with my operating system.  Upgrading to windows 7 and the printer is installed. Thank you all.

• Error of 4500 HP all-in-one wireless Wep

  I installed the printer HP 4500 all-in-one wireless.  He acknowledges the Apple network and then ask to for the WEP key.  I enter this code and it says invalid WEP.  It is not the wrong password... Help!

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP6500 all in one wireless Cup middle of page

  We recently bought an all in one printer wireless hp 6500 for my work, after the support of spending 2 days on the phone with tech we have installed, it worked great until we went to print from our quickbooks and it will show only half of the page... and I don't think its quickbooks because it does randomly with other programs. I really need a solution and don't want to call technical support again. Help!

  Only, we got rid of our nightmare week 2 HP 6500 all in one POS... We have replaced by the Lexmark 7600 Series all-in-one wireless and absolutely NO problem installing or printing, scanning, fax, copy and it was cheaper to boot. DO NOT BUY HP WIRELESS PRINTERS!

• 6500 printer all-in-one wireless

  I am a 73 year old who has learned to use a computer later than most. I know not enough for operating a computer, but I am not a technician. I bought a 6500 all in one wireless and worked with her for two weeks and could never make it work so I took it back. I love what did the printer, if only I could get it to work properly. I don't know that I'm the problem and not the mechanism.

  When I loaded the software on two computers, they would work wirless, but the bureau which has been connected to the router does not recognize the printer. After that all efforts exausted the mistake of reinstalling software would be developed. If I used the usb cable to load the software into the computer connected to the router, it would work, but the wireless would not work. Same error message. After thinking about this topic, I think I told the installer to use the usb cable in the router computer which clogged to the top of the installation wireless for the other two and the opposite for the spoiled wireless units a cable installation. I never tried plugging the eithernet cable.

  I would like to start again and see if I can feel comfortable to install. If so, I'll go and rebuy to the printer.

  My situation: I have a desktop Dell that is connected through router a BEFW 11 S 4 Linksys. My incoming signal is provided by Charter Communications cable. I have another unit of Dell desktop at home and a laptop that I want to connect wireless.

  Question: Can I connect the printer directly to the router with an eithernet cable and run the other two wireless units? I learned by a sales person (after that I came back from the printer) that if I simply connected the printer to the router thur the eithernet port it would be on my network and the Bureau recognise. Then the other two computers would connect wirelessly.

  Had no answers. Did you get any help. The printer took over and my money back. The pain is useless. Thank you very much.

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well

• OfficeJet 4500 all-in-one wireless WIIL NOT STAY online! Help, please!

  Help, please! I am incredibly frustrated with my officejet 4500 all-in-in-one wireless. my printer won't stay not 'online' and when I check my wireless network, the printer is listed as offline as well. When I try to print, I get the message "offline". I downloaded it on every possible driver update, scan and fix the hp program and even uninstalled and reinstalled this printer at least 8 times. I'm at my wit's end.

  I turned off the printer, and when it turns on, a document or two will show, then if I try to print something again immediately, I am again in offline mode.

  I also tried the 'hard reset' options I don't read here, but again, no luck. I changed both printer cartridges.

  I have coursed through the troubleshooter at least 8 times, and who never really helped. Cannot get a consistent performance. of course, at the time wherever I decided to ask for help, I'm out of warranty.

  I really hope someone can help me. I confess that I have very limited computer, so all suggestions, please use very simple instructions...

  Am I the only one having this problem?

  I'm sorry that you are experiencing this issue. It seems that your router is hitting the printer on the network. You can try setting a STATIC IP ADDRESS for her. This will have the computer and the printer communication directly.

  Here is a link that will help you implement. Let me know if you have any questions on it, or if that helps.

  http://support.HP.com/us-en/document/c02790693

  You can also reset you router. Unplug it for 30 seconds and plug it in again.

• All-in-one wireless printer Photosmart 109 n install problems with Windows 8.1

  Hello

  I have a Photosmart Wireless all-in-One 109 n printer. I recently bought a new laptop with windows 8. When I put in place it automaticalyl found the printer and installed it. I can use only through remote HP AiO. I can't use the scanner there is no application or a program that works. I tried to install the full feature software and managed to go that far to extract the files but once concludes nothing happens. I uninstalled the printer and then re-installed. nothing happens. I'm not a computer wizzard so I need help please!

  bionicpatti,

  I really appreciate the up-to-date information and thank you for your patience. I wish that you continue with the following steps:

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109707-1&cc=us&DLC=en&LC=en&OS=4158&product=3794625&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Please let me know the results!

  Thank you once again,

• HP Deskjet 3070 (All-in-one/Wireless) install problem Win 7 64

  Hello world

  I wonder if others have had similar problems or ideas on the underside, surely I can't be the only one to use this installation/suffering with this problem.

  Printers: HP Deskjet 3070 All in One (USB/Wifi)

  Operating systems: Windows 7 64-bit (installed absolutely fine on Win 7 32 bit laptop computer connected via wifi).

  Setup: - a Homehub BT, providing WiFi for laptop (Win7 32 bit), a desktop computer (WinXP SP3), the printer has an IP address, which is visible on the home network map - it has a MAC address also. My PC: connected by Ethernet to the homehub which is currently running wifi for all of the foregoing.

  Drivers using downloaded: -.

  + Computer laptop Win 7 32 bits connected via WiFi to the Homehub - installed fine, found printer - this is the stage where the printer receives a configuration intial IP address / completed.

  + WinXP SP3 connected through WiFi to Homhub - as above, correct, opportunity driver found the printer (which, at this time already, there).

  If the printer exists within the network, other computers can see / use it.

  ++ My PC: Win 7 64 bit connected by ETHERNET to Homehub (she does not and will not have a wireless option).

  Downloaded the drivers to install HP. (later tried "Run as Administrator"), select the software components (i.e. Remove feedback/coupons etc), installs OK applications, next step is the configuration of the printer. Add a new printer. "Check network" window appears with the message "Checking network environment" bar and the State. The status bar springs upward but stops dead at the filled Stadium. No possibility to choose whatever it, pressing Cancel has no effect. End of task here generates an error of 'work '. 'devicesetup.exe' stopped The installer never ends, applications are installed, but at no time, it shows the printer/selection.

  I tried many things: complete uninstall "engines", which in this case seem to be the only applications, ensure that all non-essential startup items are disabled, make sure that the firewall is DISABLED (just to be sure), ensure that the anti-virus is disabled there is, in fact, no other printer installed (this computer never had a printer attached to it) make sure file sharing and printing are powered, ensure that there is no TCP/IP/ports printers mapped etc... Still the same error, old or new drivers, always the same - installation does not complete.

  All the doctor diagnostic tools/printing tell me I have to install the driver software (I agree) but direct me to the HP site to download the ones I already have.

  I can't enter the Server Web integrated (the PC where I can't install the drivers, or one of the 2 PC's who have installed correctly). One of them if I click on networking or wireless or advanced it warns a HTTPS connection and then fails with "internal server error".

  My questions to someone kind enough to read this wall of text: -.

  + Anyone has any ideas please? I would prefer not to return the printer as defective because it seems to be a good all-rounder and it works for 2 other PCs in the House, its just mine which does not connect! Sad...

  I'll try the USB installation and then removing the USB-> wireless to see if that can help. I had previously seen articles where people offer to buy a router to 3rd party like that is basically a wifi pass through broadcaster. It is not for me thanks

  Thank you all for reading at least, it's now corrected with slightly reduced functionality.

  Install the USB printer, then DO NOT convert into wireless via HP drivers/installation.

  Change the USB to a TCP/IP port port newly created under the control panel of the printer (windows 7), enter the IP manually to the printer - you want an IP address that will change not in order to make this work - forcing the Home Hub to never provide that the same IP unique to this particular device was the easiest way for me. This connected but showed as offline printer constantly, others may have different experiences.

  To fix that (for me): -.

  Installing the printer in Control Panel Goto, force reinstall drivers HP ("via the drive"). Make sure that all the old files are overwritten. Turn the printer and then turn on (power button - twice if in mode "standby" to disable). Wait until the wireless light will stop flashing and become solid blue. Check in Control Panel if the status is online, if so you are good to go

  As a result of this sabotage, you lose the feature advanced scan for PC etc etc, but the real impression seems to be absolutely perfect. The printer is always available to everyone on the network, etc.

  Good luck to all.

  Alex

• I can do my 8500 Pro all-in-one wireless Bluetooth

  Hi all

  Curious to know if I could use the USB HP Bluetooth adapter for my printer (not wireless) the all-in-one Pro 8500 wireless. I'm hoping to avoid the hassle of setting up a wireless access point. Bluetooth will provide a lot of range for my needs.

  Looking at the HP BT500. It will just plug and I are going to get? To the description: "" connect wireless your Bluetooth- devices to your PC and Bluetooth- compatible printer"»

  Thank you!

  UPDATE:

  I bought the adapter USB - Bluetooth BT-500 HP and it works perfectly with my printer HP Pro 8500 all in one (not wireless).

  Just plug it into the USB port on the printer and discover via your laptop or another bluetooth device. I was printing within 30 seconds with my Dell Vostro laptop computer (Windows 7 Pro / 32-bit).

  My guess is that the all-in-one printer 8500 being offfered in a wireless version, no wireless units are Bluetooth "ready" or "capable".  It is probably the case with the other printers 'compatible '.

  Hope this helps someone down the line.

• 114 the desire does not connect to Asus all-in-one wireless but connects to the wireless network

  I just bought my HP ENVY 114 e all-in-one last week and I tried to connect it to my computer (Asus all-in-one Windows 7 64-bit) and while he wil connect to my wireless very well my computer (or my cell phone which is also an Asus running windows 7 64 - bits) cannot identify it.

  Using the disc doesn't help nor did try manually to add in 'Add printer' in my computer and all the interest to get this particular printer was because it was wireless. If I have to plug in a USB key then I have saved money and bought a less expensive model. All my devices are on the same network, and their firewalls is turned off so that it does not hinder the process.

  When you browse the drive Assembly he asks the IP and I get it exactly as it is on the screen printer that I even printed it out and double checked 5 times and it was exactly the same, but he keeps asking for me to be reintroduced to it since the computer cannot identify the printer.

  Any help would be great I prefer not to have to pack up this thing and take it back...

  Unfortunately, the router and the printer do not get along at this stage.  The IP address changes too often and it is possible that the router has its own firewall.  A large number of firewalls, outside the Windows Firewall, sees a lot of traffic from hpnetworkcommunicator.exe and blocks preventing the software to find the printer.

  I saw this model of router and it doesn't have a built-in firewall.  Unfortunately, I could not see their manual without you register on the site.

  It may be preferable to set a static IP address for the printer in the router's routing table.  To do this, you acceding to EWS the router.  If you don't know how to set the printer's IP address in the router, you can try to contact the vendor of the router.

  Otherwise, I would recommend checking the firewall of the router.  I saw a router cause problems with an overactive firewall in place.

  If you happen to have an extra router around, you can try to use it instead of Paul's to confirm that it is the router.

  EDIT

  You can try to put a static IP address on the front of the printer.  I'm personally not too successful with setting a static IP address on the front panel when the SAP does not load, but this could be one of those cases where it does not.

  First, print a Network Setup page by going to Configuration > Wireless > Network Configuration > print Network Configuration.

  Then, go to settings > network > IP settings > change to the manual.

  Once it is replaced by the manual, it should allow the IP address, default gateway and the subnet mask.  Use the subnet mask and default gateway of the print network configuration.  Use an IP address that is not in use on the network.  You can change the last number of the IP address on the print.  For example, 192.168.1.50 could be converted to 192.168.1.250.

  Setting a static IP address on the front panel does not set servers DNS which is necessary for ePrint operate on this printer.  Now that the static IP address has been set on the front panel of the printer, try to access the SAP by entering the IP address that comes to be defined in a browser address bar.  If the printer load, you should be able to set DNS servers and be ready to go from there.

• I have a hp photosmart c7250 all-in-one wireless radio does not work

  I have a HP Photosmart C7250 all-in-one and the Wireless does not work.  When I try to go through the wireless configuration wizard, the test report shows the following - 'the wireless radio does not work.  Contact HP support.  Can you help me?

  We will reset the printer.  Turn the power off, hold it # and 6 keys all on again.  Go to Configuration > network > wireless network Test later to see if it worked.

• PhotoSmart 3210 All In One wireless network and does not know how to connect now lost.

  Hi, I have a 3210 all in one Photosmart, and I can't find it on the network more.

  I know that I've done worse of unistalling, reinstallation of the driver HP software and change the IP address of the printer. So I hope that someone can help me with this problem and return to the place where its still visible.

  I have a PC with XP and a Mac with OS 10

  Computers are both connected to the modem wireless cable router.

  The printer is connected to the router via ethernet.

  I can see the printer using a browser and entering the IP address of the printer. I can ping its IP address. The Mac can see the printer, but have installed the correct drivers to see (I think I can handle this, no need to worry about this yet).

  The problem is that I can't see it in the "Add a printer" Wizard on the PC. So I can't add it to the PC.

  I looked around the support of HP and they told me to uninstall the drivers and reinstall them. There was also mention of changing the IP address of the printer to a larger number, but that no longer works. So I went to the automatic assignment of an IP address to the address of the printer. And finally, I've seen mention to unplug the printer and by pressing 'ok' and 'Cancel' all plugging back in. He did a very long installation, but does not solve the problem.

  I searched the forums for a solution and can not find one - so I've exhausted all help (Ive been on the forums enough to know to search before posting a question).

  If Im not sure what to do next. Someone at - it suggestions? I don't really know what I can do to fix this problem: I'm sure it is just a corrupted file or bad setting somewhere I just do not know where he is.

  Thanks in advance for any help.

  Message edited by creeg on 30/09/2009 22:42

  For your Mac:

  If you're running Snow Leopard, the driver for the 3210 is compiled.  Open the applet Print & Fax under system preferences, then press [+] to add the printer.  For other versions of Mac OS, download the driver from here and run the installer.
   
  If you continue to have problems with the Mac, reset the printing system Mac and repeat the instructions above.  Information about resetting your Mac printing system can be found here (http://support.apple.com/kb/HT1341)

  For the PC:

  The 3210 is on the network, we will try to add the printer manually. First verify that you can access the printer's internal web page by accessing its IP address or host name.  You can find the IP address and the host name by printing the network configuration page.

  Here is the sequence of manual installation of the printer driver for XP:

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the host name of the printer. You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

  
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• How can I change cable on Hp photosmart all-in-one wireless?

  I have a HP Photosmart wireless all-in-one and you want to print with it connected to the computer. What I need to change the printer setting to 'OFF Wireless' for this to work? Thanks for a response.

  Try to connect the printer to the computer and the wireless off. Then, go to system preferences/printers and Scanners, remove the printer and add it again.

• HP Deskjet 6310 all in one: Deskjet HP 6310 all in one wireless printing functions

  I have a HP Deskjet 6310 printer all-in-one and want to know if this printer has wireless capability (i.e., can this printer receive orders for wireless printing)?   (Note, I have a new MacBook Air wireless with send feature).

  @NickC3

  Your printer:

  All-in-one printer, HP Officejet 6310 range

  The printer specifications indicate the printer works with 2 USB, a wired Ethernet connection and - with an adapter - with Bluetooth to be printed.

  Thibault system requirements:

  • USB 2.0 full speed, front and back ports