5520 photosmart all-in-one: how to identify which cartridge needs replacing on 5520
My computer showed me the message that the printer ink is running low. I open the printer to replace the cartridge, but I don't see what cartridge, color or black, that has to be changed. On my previous printer, low cartridge has been identified by a flashing light.
How will I know which cartridge to replace?
Hello
Since the home printer screen, tap ink icon (symbol of gout).
Kind regards.
Tags: HP Printers
Similar Questions
-
How can I print to hp photosmart all-in-one ipad 7280
How can I print to hp photosmart all-in-one ipad 7280
Hello
But the C7280 is not active AirPrint, you can still print via the local network using HP ePrint mobile app.
You can find the steps to get and use the application in the following document:
-
How to enable print double-sided on 6520 photosmart all-in-one
How to enable duplex printing on 6520 photosmart all in one running on windows 7
The Photosmart 6520 support automatic duplex printing.
You can follow the penlow stes to set duplex printing:
http://support.HP.com/us-en/document/c03476083
Shlomi
-
My HP Photosmart all the one used for direct scanning to my computer which has Windows 7. He went offline and now works fine. But now Windows Fax Scan & custom ' work. My computer guard says that a scanner is not detected. Please help I'm not very good at this stuff! Thank you!!!
Review HP support site, or use diagnoses of HP, a shortcut to that would probably be on your desktop (if you installed according to the instructions from HP, their cd and does not just plug the printer)
-
Wirth problem Scanner printer HP Photosmart all-in-one.
How can I activate the scanner on my HP photosmart all-in - one printer?
How can I activate the scanner on my Photosmart all-in-one printer?
-
Failed to get printer hp psc 2410 photosmart all-in-one to print in color
I have a hp PSC 2410 photosmart all-in-one printer. I use it on a system windows xp, 32 bit.
I went to make a copy in color on the printer and it gave an error on the black cartridge by saying that she does not recognize. Had not changed or replaced the cartridges they were half full. I tried to go out and reinsert the cartridge, but it did not work.
I replaced it with a new one. Error disappeared, but it now only prints in black and prints any color at all.
Replaced the (full) cartridges with new ones, aligned and clean the printer started it twice, without change.
Close the pritnter and computer, did it again, same results.
Uninstalled and installed printer and software, same result.
What could have happened? Behaves as if it doesn't have a color cartridge.
Here is a document for your printer who carry on Matt, missing or faded colours. This document starts and you then click on other links to documents based on your results from the troubleshooting performed. Stay with him and he will lead you to how to clean contacts and how to read the diagnostic report, once it prints. I think that some steps are buried, so here a link to assess the self-test. Finally, here's a direct link to fix bad test models in the self-test report. I hope this helps. http://support.HP.com/us-en/document/c00048685
-
HP photosmart all-in-one C2780: installation problem
I have a printer HP photosmart all-in-one C2780
You download the software and drivers for this printer on HP site
When I start the installation of the software from starting the program after that extraction does not work and a message appears saying:
Microsoft Visual C++ Runtime Library
Runtime error
Program C\users\FALVES\Appdata\Local\Temp\7zS1B01\Setup.exe
This application has requested the execution to terminate in an unusual way.
For more information, contact the application support tema.
I ask?
How can I contact the Support team
What's wrong
How can I solve this problem
Ok
Knowing that you use antivirus software can help to understand it better, it will be great if you can clarify that.
So, try the following steps in the meantime:
- Click on the Start menu and type %temp%
- Open the listed temp folder, and then open the HP folder that begins with 7z.
- Open the UTIL folder.
- Open the folder of the CCC.
- Double-click on the file Uninstall_L4.bat
A prompt should appear and several unisntallers should run, if only a black window appears, click enter once.
Follow the steps of screen on until the uninstall ask to reboot the PC.
Reboot it and try to reinstall the software.
If it persists, remember to specify accordingly.
Shlomi
-
I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!
HP Photosmart all-in-One Printer series - B010
MacBook Pro / 10.8.1 (Mountain Lion)
Router
Hi yadin7,
The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.
You can find the specifications listed below:
Input/output USB port: Rear hi-speed
Kind regards
Shlomi
-
HP Photosmart all in one printer C7280 Windows Vista 32 bit.
My HP Photosmart all in one printer keeps going to put in place for the printable school pictures.
I unplugged and it always goes to the same thing when I turn it back on. How can I fix it
This problem?
Thank you
ducksterman.
Hi again,
If it doesn't appear on your printer and not on your PC, right? My bad... I'm in the driver settings. Try holding down the symbol # and 3 at the same time on your printer. This should reset the printer. If this does not work then press the symbol # and 6 at the same time.
Or
To restore the default settings
1.
Press Setup.
2.
Press to select Tools, and then press OK.
3.
Press to select Restore Factory Defaults, then press OK.
The default settings are restored.
Let me know if that helps...
-
Photosmart all-in-one wireless B109n - problem with detection of the cartridges
I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).
When I tried to use it later, he said that the cartridges were not detected.
Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...
How this can be solved?
Back to the store where I got it.
They saw the same thing I had met and gave me a new without much fuzz
The new works very well
-
HP PSC 2410 Photosmart all-in-one printer SLOW printing
All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.
Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.
I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.
Help!
Hey Rainbow7000,
I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.
I would have thought there would be some am indicator when the cartridge is low, but it was not.
Thanks anyway.
RenardB
-
Unit Auto-duplex of PSC 2410 Photosmart all-in-one
I bought a new computer that uses 7 (64 bit) of Windows operating system. I have attached a PSC 2410 Photosmart all-in-one printer. The auto-duplex feature is no longer available, manual duplex printing is available. When this printer was attached to the previous auto-duplex printer unit funtioned perfectly. Only change was to the old unattach & reattach again.
This problem can be resolved or do I use the manual funtion?
The duplexer must be activated as described in the "Vista/Wixndows 7 Duplex Printing Troubleshooting Guide".
-
Photosmart all-in - One 7520: new driver for Mac El Capitan in a 7520
I installed my OS from Mac to El Capitan (10,11) 2 days.
Have the camera HP Photosmart all-in-One 7520. The printer driver will only up to Mountain Lion (10.6). The printer works, but the scanner does not work.
I had Geek Squad go through everything on computer, looking for latest info on your site, etc. Conclusion: Need new driver for the scanner compatible with El Capitan.
Is a new driver in preparation? I would like to know as soon as it is available, because I scan a lot of information every week.
Thank you.
Hi @DStrick,
Glad to see that you are using the HP forums, this is a great question other customers might wonder about too! I can help you get the required software for your 7520 for use with El Capitan! Once solve us the problem, please state the position which I accept as a Solution to help others find the answer to your question!
This download package contains the complete software solution for Mac OS X El Capitan including all drivers and software needed: file name: HP-inkjet ink-SW-OSX - Mavericks_v12.34.44.dmg
This software has been updated 1 October 2015 and can be found here: software and driver downloads for the Photosmart 7520
Please let me know if this actually solves the problem, or if you need assistance. Thank you.
-
Hello everyone.
I am a happy user of HP Photosmart all-in-one printer and for many years never had a problem. I always bought new 862 cartridges and it worked fine. Recently, a friend brought me to Singapore two new series of cartridges, but the owner of the store said this is the new higher capacity cartridges. I said why not? Even better, in fact since the printer is a guzzler of ink!
This is, because I tried to install these new cartridges, I always get the message "Incompatible cartridge" after what, I can't not access the printer.
Can someone help me solve this problem? The cartridges are exactly the same, so I suspect its something to do with the chip? I tried all possible methods such as the re-installation of the cartridges, remove the carriage and re-setup, cleaning the cartridge chip, etc.
Since I'm brought this printer back from China to Europe, I really need to solve this problem otherwise I'm stuck without a printer. These cartridges are not available locally.
I would be grateful any advice! Thank you.
Your printer can use cartridges of 864. Unless you call HP and have them reset the printer to your new country, you live. Only then these cartridges can be used if you can find them on the spot. Call HP.
-
While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.
Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.
Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.
Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.
Maybe you are looking for
-
How can I transfer applications purchased for powerpoint from my iPad to my mac pro book mini
How can I transfer the purchased apps like office powerpoint from my iPad to my book of mac mini
-
Don't know what I'm doing wrong. The icon says Firefox under him, but it looks more like an external hard drive icon, so I know this isn't the Firefox icon that goes in my Application folder.
-
Administrator denies access to do anything on my laptop
I received this error message indicating a not enough space on recovery (D). As administrator, I can't access anything on my laptop. Don't know what caused it. Any command to system admin I get an error stating that I don't have the privileges. I can
-
Windows Movie Maker - file invalid / not found
I made a movie a few weeks previously registered, get in there a few days later and made more copies. Today, I tried again and I keep getting a message that the file is not valid. I tried opening upward in the creation of DVD and it keeps saying that
-
Replacement of the main policy
Hello worldI'm on a catalog of nearly 600 pages and I need to replace the main police by a new and totally different.Make automatic replacement of many text boxes are too small for the new police force and I have to enlarge one by one by hand. I woul