6500aplus Officejet printing problems

Similar Questions

• HP Officejet Pro 8630: 8630 Pro HP Officejet printing problems

  I'm trying to print from Printmaster Platinum 18.1 to the printer Officejet Pro 8630.  I tried using a network connection and a direct connection, it seems not to matter.  When I check the printer icon, it shows it's queue, and then print.  The message on the printer printing runs for awhile, thenprints 1/2 "of the document then stops and spits out the paper.  My old HP printer never had problems printing of this software.  Any idea what the problem might be?

  I tried to download and install the latest drivers and it does not change the issue.  He still hangs with spinning print button and print only 1/2 "of the document and spit the paper without completing the print job.

  I have no problem printing from other programs. I tried to print a different document from Printmaster and it printed fine. It is just a document. I finished by exporting as jpg and managed to print that way. Thanks a lot for your suggestion. If I have other questions, I'll install the 9800 driver.

• OfficeJet 6500 has MORE printing problem

  Y at - it a setting to load the paper? My print jobs is now too high on paper. I have recently updated my computer to Windows 8.1 but I do not know if this concern began before after I've changed computers. I printed the page diagnosis and the letters are about 1/3 cut top

  Welcome to the mike325 forums

  I saw your post on your Officejet 6500 more model cut your impressions. I suggest an alignment running on the printer to see if that helps. You can also run the HP print and Scan Doctor to solve printing problems and that the tool can help to clear up the problem.

  To help alignment, click here and scroll down until "step 5: align the print head": align print head

  I hope that these steps to do the trick, please let me know the results!

  Have a wonderful Thursday

• Problem with HP officejet print neqw modem

  HP officejet 6500 wireless will not print on wireless just have chnged modem and the password how to fix it please, I have windows

  Hello

  • What version of Windows are you using?
  • You receive an error message?

  I suggest you to run the troubleshooter under construction, link, you can refer to the same thing:

  Open the printer Troubleshooter: http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can even check out the link below:

  Why can I not print? :

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Printing problems of Notebook PC G72 for Officejet J6480 all-in-one

  Unable to print on my Officejet J6480 HP printer all in one of my G72 Notebook PC.  Do not know what is happening, I could possibly print incorrect setting.  But I was able to print before.

  Hello

  · What is the operating system installed on the computer?

  · You receive an error message or error code when you try to print?

  · This occurs when you try to print with a particular application?

  Try the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

• HP Officejet Pro 8630: HP Officejet Pro 8630 printing problem

  Hello

  I have a printer HP OfficeJet Pro 8630 with two different computers connected on it. I have no problem printing from the computer that I use every day, but when I try to print from the other office, nothing happens. The second recognizes the printer and says it is connected, but it does not recognize the printer. In the meantime, I can turn around and print something on the computer to work immediately after I try to print on the other. If anyone has any suggestions, I would be very happy! Thank you.

  Hi @AdminGuy,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you have a HP Officejet Pro 8630 e-all-in-one printer is connected to two computers via a wireless network, the main one has no problem printing, but the printer is not responding to print jobs sent from the second PC. I would like to help with that.

  Is the PC that does not work with the printer to Apple or Windows computer, and what operating system is running?

  If it's a Windows PC, try to download and run the HP print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  Please get back to me if you want.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• HP OFFICEJET 4500: printer problem hp 4500 doen't pull paper from the bin, hp print and scan doctor did not help

  Paper printer problem hp 4500 doen't pull of the plateau, hp print and scan doctor did not help

  Have you tried that?

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---K710/4181269/document/c01969913/

• Officejet j4580 printing problems

  I'm under win 7

  HP all in one machine Officejet J4580

  Implementation on the newer computer, I find that

  FAX works OK

  Scanner works OK

  Printer will print OK test page

  Printing documents No..

  I'm trying to print documents in the following

  Notepad - instant flash for ink level window and printer shows no prob.

  but printing is not the case.

  Word Pad - same as above.

  Write _ same as above

  I installed and removed the drivers and the software several times. Same result.

  What must I do to fix my printing problem?

  Hi harryc72,

  I would like to allow you to print to your Officejet J4580. Please, first run printing HP and doctor Scan and let me know the results. You will see a key, a yellow exclamation point, a red X, or a checkbox then each point tested.

  

  Click here to download and run the utility > HP print and Scan doctor.

  This will help use to determine the cause of the issue, and perhaps solve it for us.

• Officejet Pro 8620 printing problem

  I am trying to print a document of 26 pages, double sided on my new printer officejet pro 8620. It prints a page aside 26-20 double ok and part prints then stops of 19 page. My windows o/s 8.1. Anyone has a solution. Thank you

  Hi Roger41,

  Welcome to the HP Forums!

  I see that you try to print a document duplex of the 26 page with your HP Officejet pro 8620, and he stops on page 19. I'm happy to help you with this printing problem!

  To get help, I'll need to know:

  1. If the printer is connected, USB, Ethernet, or wireless.
  2. If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  In the meantime, please try the HP print and Scan Doctorand let me know what happens!

  I hope to hear from you and have a nice day!

• OfficeJet 5740: Problem of margin envelope C6 with HP OfficeJet 5740 all-in-one printer

  Envelopes (and Yes, I know how to load) print perfectly well, except that the left part of the return address is cut off. In order to get the full print return address, it is necessary to define a very wide margin that moves the return address too close to the center of the envelope.

  In 2014, a user of Windows 7 has had exactly the same problem, and solved by offering it use another personal HP printer driver (what they delivered) for his printer. You can read how the issue has been resolved here. You have any fix available for people using Mac OS? I really don't understand why it is possible to print close to the border of the page with the largest paper (A4), covder the entire area a photo 4 x 6, but require a huge margin between the left side of the envelope and the return address.

  Thanks in advance for your help. I really like this printer, but if she is not able to perform a routine task such as printing an envelope normal search, it reallty is a showstopper for me. It must just be a bug in the driver, and it needs to be fixed!

  Welcome to the HP Forums @dkiechle!

  I'd love to help you print on envelopes without having to change the margins to a point as it is too close to the center of the envelope return address. Since you mentioned the pilot, let's start there.

  Please follow the instructions below to check which driver you are using and change:

  1. Click on the Apple and then click on System Preferences.
  2. In the hardware section, click Print & Fax/Scan. The Print & Fax/scanning dialog box opens.
  3. Click on your printer if it is selected and find beside 'type' to see which driver is used.
  4. If you see AirPrint, remove the printer, then click on the small symbol to add the printer back again.
  5. Choose your printer and click on the drop down next to the 'use '. You will see the option to choose your printer in this "use" drop down. The image below is a screenshot of an Officejet printer, but help to display my description.

  If you see the HP printer that is already in use and not AirPrint, deleting the printer and add it again using the AirPrint driver. This will help isolate the driver as the first cause one way or other part.

  If this resolves the issue, please click Accept as Solution below; If not, let me know and I will do everything I can to help.

  Thanks, I look forward to hearing back on your part.

• iPhone5 with Officejet 655 wireless printing problem has

  IPhone 5 won't print wirelessly on Officehet 6500 a. done before, but since the update will not be

  Hello

  Sorry to hear that you are experiencing printing problems.

  You use the functions AirPrint and ePrint? The phone is able to see the printer?

  Things to check would be that the printer and the telephone are always connected to the same wifi network and that there has been no wifi password.

• C6180A: Network printing problem series C6100

  Hello

  I pray that someone here can help with my network C6180A impression of questions, as I am at a loss to know what to do. I'm technical enough for a layman (not irritable) so able to fix my printer problems, I had to do several times in recent months. However, I am now in a complete deadlock as to what to do next.

  Implemented - laptop HP Pavilion (less than 1 year running Windows 8.1 64bits) connected by wired home network using Netgear HomePlugs, on which my C6180A All in One Photosmart printer is also connected by a Homeplug Netgear network around my house for others to use. The network software Netgear genius picks up the printer and it shows on the fine network. I can also access the IP address of the printer through my thin Firefox browser.

  Printer C6180A is (I think) about 8 years ago and has been well used with over 44 K printed pages! It worked well overall until recently. Minor problems have been solved in the past, which I was able to do very well.

  Until recently, the printer worked very well, so a few weeks ago (nothing has changed on it, or my laptop), it just started to stop printing and also started to enter spurious characters (always number 7) on the LED panel without doing me anything, as if someone was going to put in a fax number. It would show a string of 7 like this: '7777777777777777777' as a fax number alone.  Yet I did not or use the fax on it more. It's where I wondered about capacitors, as I mention below...

  However...

  It will not print many pages at once of all today - even if I get it print OK. It does not go offline (it used to do this), just print job gets stuck in the queue and must be deleted using HP Print & Scan doctor. Nothing else removes the queue now. And no other problems are reported with this utility. If they are, then I have Setup or the utility corrects.

  I did the following to get it fixed so far (with little success ongong):

  -updated and install printer via the HP website drivers (most recent is dated December 6, 2015)

  -uninstalled and reinstalled the driver software several times = sometimes a test page impressions, not always

  -restart the laptop and printer each time I do this to clear no matter what cache

  -Remove and add the device in Control Panel = got a few pages printed today this and nothing else then prints

  -check the IP address of the printer to make sure that his recognized on the network = all fine here (IP address added manually in the settings of the network on the printer a few months ago), although I can't make it here anymore as the "ok button" on the printer does not work now (minor in question not related to this in my opinion)

  -did a hard reset of the printer using the # and 6 to do this = it worked for a few pages then orders

  -printer is always / recognized by any software, driver or utility HP PSD when turned on to be detected to install

  -printer works fine when connected directly via a USB cable, but which is not what I want to do on a daily basis

  -have contacted Netgear in the recent past to make sure that my HomePlugs on my network worked very well, they were. If not, then the printer would not be detected by any software installation or fixing with HP PSD

  My last resort will be to check if the capacitors are down, I saw in other forums that this is a common problem after a while on these printers. Before making this "repair" I bought the capacitors, I wanted to check if there is anything else I missed that I can do to finally once and for all this problem of printing.

  Help on this would be so MUCH appreciated by any expert here, because I lost so much time, days in fact, try to resolve this issue as you can only imagine. I have to be able to print for my business. It is not an option to replace the printer currently.

  It worked fine until the last 3-4 weeks or more... Where my question detailed with what I did to fix it until now.

  Thanks in advance. ANIA

  Hello @AZS1,

  Welcome to the Forums of HP's Support. I understand that you have a problem with your C6180A. I would like to help.

  To be honest, you did some troubleshooting. To say that you are quite technical for a layman seems to be an understatement.

  I provided you with a link to solve network problems. If the problem persists then you might as well go ahead with the repair. The only other option would be to have fix the printer.

  "Printer not found" error message for printers all-in-one HP Photosmart C6100 C7100 and Officejet Pro L7700

  Please let me know how it works. I'm pulling for you.

• 5740 HP Officejet printer: HP Officejet 5740 prints all lines of poor quality of black ink, a few lines thru

  New printer, getting the veins through every few lines of print black ink

  Hi @Badgermitt,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet 5740 e-all-in-one printer with a PC of Windows 8 and the printed text has black steaks through every few lines. I would like to help with that.

  Black lines through the text is usually due to present an accumulation of debris around of the cartridge that can usually be solved by cleaning cartridges or ink. This can be done in the control panel of the printer.

  Cleaning of the cartridges is discussed in this support material designed to be used with this problem - solve print quality problems.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP OJ 8610: printing problem

  Instalation of HP JO 8610 pro network. I can print and scan from a pc without problem aney (windows 7)
  with the 2end pc: the connection is made, I can scan, but I can't print! scan and HP print test page printed to the icoudent doctor, but I could print internal test page? I did uninstall and installation softwahre fromcd and internet hp webside. Help, please

  Thank you

  Hello @firaskhalil,

  Welcome to the Forums of HP Support!

  I want to help you solve your printing problem you feel when trying to print from your Windows XP computer to your network connected HP Officejet Pro 8610 e-all-in-one printer. I understand that you are able to print correctly on your Windows 7 computer network. I see that you can run the HP printing and the doctor without any problem analysis tool and print a test page with success over there from the Windows XP computer. You are also able to scan without any problem. With all that being said, I think that what you experience on the Windows XP computer is a driver conflict. I think that your software and network connection are quite well. That being said I will guide you through the addition of an alternative HP Officejet generic print driver. You won't lose any functionality while using this replacement driver.

  Step 1: Clear the temporary files:

  1. Click on the Start menu
  2. Check the box run
  3. In the Temp folder, type folder , and then select OK
  4. When the Temp folder opens, click the first item in the list, and your shift key on your keyboard and scroll down a few lines and click another item in the temp folder. Everything between the two points that you click on will highlight now. Select the "delete" button on your keyboard.
  5. Continue these steps until all items in the Temp folder have been deleted. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer are affected by your by deleting temporary files. A file should always be used in the Temp folder, you will get the pop up 'try again ' or 'Cancel' the point. Simply close the pop-up screen, ignore this file and proceed to remove the remaining files.
  6. Once the Temp files are deleted, close the folder
  7. Right click of your recycling bin on your desktop and select empty recycling bin

  Step 2: Download driver replacing:

  1. Please click here to download the appropriate driver
  2. When the site opens, select the download button at the top left
  3. Allow the download to run
  4. An extraction should take place once the download is complete
  5. If the installation window opens automatically, please close the window.

  Step 3: Adding a driver replacing:

  1. Click on the Start menu, then select box to run it
  2. Type %temp% , and then select OK
  3. When the Temp folder opens, find the file 7z
  4. Click the 7z folder to open it
  5. At the top of the window, you will see the path of the file bar. It may look like: Local C - users-AppData-Local - Temp-7z... drive Left click once on the right side of the bar. Everything in this bar will highlight now. Right-click on the highlighted file path and copy it. 
  6. Close the Temp folder
  7. Click on the Start menu
  8. Choose Printers and faxes (you may need to go to the control panel for this)
  9. In the Printers folder, right-click on your HP Officejet Pro 8610 and left click on Properties
  10. Left click on the Advanced tab
  11. Left-click on new driver
  12. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right
  13. Click on disk at the bottom right
  14. In the window "install from disk", there will be a path bar. Right-click in this bar and Paste in the path to the file we copied previously.
  15. Click OK
  16. Choose the HP Officejet 8600 and click Next to complete the wizard of pilot.
  17. The title of the Properties window, select 'apply' but do not hit OK
  18. Select the general tab
  19. Rename your printer in HP Officejet Pro 8610
  20. Click OK

  Now that the new driver is added please try printing again.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• 10 Windows compatible printers: printer problems after the upgrade to Windows 10

  If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

  If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

  • Cannot print after upgrading
  • Cannot parse after upgrade
  • Printer software installation & screen opens instead of HP printer Assistant
  • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
  • Multiple display of printer in the HP printer Assistant names
  • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
  • "Access denied" error change HP Solution Center print settings
  • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
  • Fax device are not not in the devices and printers connected to a USB printer
  • HP Printer Wizard does not open with a USB connected printer
  • HP Smart printing does not open in Internet Explorer
  • "Error-2081883401' poster during the uninstall of the printer driver.

  In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

  Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.