HP OJ 8610: printing problem

Similar Questions

• HP OFFICE JET PRO 8610: printing problem HP OFFICE JET PRO 8610

  I have a problem with HP officejet Pro 8610 print, it prints very slow and then it stop in the middle and then print again after 3-5 seconds, it is very time consuming. I've known this for 2 weeks and this printer is brand new as 2 weeks of age. I tried to reinstall it 3 x already. I use a wireless connection to the printer, but even if you use a usb cable I still encounter this problem. Please help me with this printer.

  Hey @FICONT,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your PC of Windows 8.1 slow printing to your Officejet Pro 8610 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once this is done, please let me know if you still have problems slow printing.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP officejet pro 8610: hp officejet pro 8610 printing problem

  I printed the Page of quality Diagnostic and see white lines through the colored target Test 3 blocks. I cleaned the print head using the menu configuration and reprinted Page diagnosis but still see the same white lines. I had to take the cartridges from the printer before cleaning the print head?

  Thank you.

  Hello

  In step 8, clean print head isn't on the physics of cleaning of the print head, but this is an internal routine that performs the printer.

  Clean print head must be performed while the cartridges are in the print head. What you did is correct.

  I suggest to replace one of the ink cartridges ink level is less than 25%., especially the colored blocks where you see white lines in them.

  If the problem persists (white lines in the sights of test 3.1), then follow the steps mentioned in Solution 8 and 9.

  I suggest getting a new printer.

  If you are in the United States, you may be equipped with an option to upgrade. Dial 1-800-474-6836

• OfficeJet pro 8610: printing problem mac Mail 8610

  Cannot configure the scan to e-mail. Installed the most recent driver. MacBook pro, OS X10.10.Scan compatible laptop. The data entered in s-t-e even with regard to the email (Comcast) which is working, checked with Comcast. Test shows constantly "Server unavailable".

  Even more bizarre! Open utility scanning HP, print selected to the computer icon. Printer and the computer detected. Message says print to work enablrdClosed window. Choosinf email icon print product previosly errors described.

  Use the printer screen chose scan to computer and after selecting my computer has been awarded an email in PDF menu. 3 pages scanned and when chose not more scans all 3 pages appeared in a single PDF document in an email ready to be sent. It seems that bugs are in the instructions, not the program.

  Len

• OfficeJet Pro 8610: 8610 printing problems - diagnosis will print but nothing else

  Nice day

  My printer does not print Office, PDF, images, etc.  However, it will display the diagnosis of the Toolbox page.  I don't know what to do.  I uninstalled and reinstalled, rebooted my computer and nothing worked.  It obviously becomes the info as will print the diagnostic Toolbox page.  I am trying to print over wireless and cannot go to cable because of the size and the location of my computer and the printer.  Any helpful advice would be greatly appreciated.  Thank you.

  This widget could not be displayed.

• OfficeJet Pro 8610: Printing on HP Officejet Pro 8610 doesn't give any form printing

  Hello

  I'm trying to help a client to their printing problems.

  They have a Windows Server 2008 R2 Foundation install, they are trying to print from. The printer appears to have been installed properly and had been using the steps described in this article: http://support.hp.com/us-en/document/c03351547

  The issue, is that even when to print a test page, the page of the coils in the window "See what's printing" and disappears, as if she had been sent to the printer. No page out of the printer.

  I restarted the server several times.

  I can ping the IP address of the printer, and I can also access the page via Chrome.

  The Officejet works with their computer Windows 7, which are on the same network.

  Am I missing something?

  I was able to solve this problem by following the steps described in this article: http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/No-print-from-Windows-7-Desktop-and-Officejet-Pro-8610/m-p/5120498/highlight/true

• All-in-one Officejet Pro 8610: print only every other envelope

  The printer ignores the other each envelope.

  Any suggestions?

  Thank you

  Mark

  Hello @Markb60000,

  Welcome to the Forums of HP Support!

  I understand that your HP Officejet Pro 8610 e-all-in-one printer has problems when printing envelopes from your Windows 7 computer, as every other envelope seems to be ignored during the printing process. I would like to help you today with this problem to print the envelope. Now, the first thing I did after reviewing your post has been watching the media specifications for your specific HP Officejet. Just to let you know, the specifications of following envelopes are supported:

  • Envelope weight and loading capacity in Tray 1 of your printer are as follows:

  

  • The following envelope sizes are supported:

  

  As long as you are printing on an envelope which is in the specific size and weight restrictions for your product, you shouldn't have any problem loading up to 30 envelopes in your bin at some point.

  To confirm that your envelopes are loaded properly can I please have you click here. Once the support document opens click the drop down menu to "loading envelopes. Please check to confirm that you load the envelopes correctly in your paper tray.

  • If your envelope printing problem persists after checking that your type of envelope is justified and that they are loaded correctly, can you please specify what type of program you use on your Windows 7 computer to print envelopes of.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• 8610 printer: printer 8610 kills modem and router

  My 8610 printer is connected to my wireless network.  Whenever I turn it on it kills my connection by modem TECHNICOLOR tc8305c voice and data.  I lose wifi and my phone lines shut down.   I can get them back through the support of Comcast to reset the modem or usually pressing the reset on the back of the modem.  Any ideas how to solve this problem?

  Yes.  That is why buy a router of high quality that YOU have full control over.  If you have a phone from Comcast, Devil buy your own modem also and save 10 $par month rental.

• Where can I find better, more correct instructions to solve printing problems by editing prefs.js?

  Instructions of "resolve printing problems | Firefox Help, line 6. Delete all the lines in prefs.js that begin with print_ and save the file. "do not match what is actually in my prefs.js file.

  In other words, he didn't y not the lines * beginning * with "print" or "print_". However, the string of five characters 'print' is * very * many times buried deep in a line of characters, but never at the beginning of a line and rarely followed by underscore. So I have no idea what I'm actually planned to do to solve my problem.

  It seems to me that this is just a badly phrased statement that might be more appropriate for someone who is familiar with the codification and development of software, which I'm not. I don't have the time, experience or knowledge to understand. I need more literal/explicit/specific instructions.

  The printing problem I have is that I have to print via WiFi to a printer in another room wired to another computer, and Firefox seems to switch or possibly reverse scales fonts for information of margin and the text of the Web page. In other words, the title of the document, date, time, prints etc very wide and the content of the page text prints almost too small to read.

  If there is a lot of user set prefs involved that need to be reset, then it's much easier to delete related lines of the prefs.js is each of them with the button straight on the topic: config page and click Reset.
  This is the main reason (single) to edit the prefs.js file.

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• From updateing to 8.1 WIndows printer problems

  Until I updated to Windows 8.1 other months everything was going well on my new laptop, then I went to something of my HP Photosmart B109n scan and it did not work because the pilot was now missing and the application that replace the HP printer driver HP is useless.

  On the advice of the HP site, I tried to download the new driver, but it wouldn't go, he said I had to remove the exsisting installation but when I try it just reboots the computer, but is still there afterwards. It turns out the uninstall has disappeared from the current and installation does not appear in the installer I downloaded.

  As a last resort, I used the system restore but has not only the printer has not changed but now some pre-loaded apps will not work and ask to renew the license of developers.

  I'm a lost what to do next - please help!

  Your laptop is not known to me, but in the case of update 8.1 Win, you should check this update from Toshiba to win 8.1 page: http://www.toshiba.eu/innovation/gen...ws8_1-message/

  There you can check if the Win 8.1 is supported on your laptop and how to perform the Update step by step for Windows 8.1
  Some drivers must be uninstalled and updated after installation of update 8.1 to win!

  Regarding your printer problem:
  Each manufacturer of the printer contains own drivers for the Windows System.
  We don't know me if HP released Win 8.1 compatible drivers for the printer Photosmart B109n clean, but to be honest, this problem is not related to the Toshiba laptop. If you have problems using HP printer under 8.1 to win, you should visit the support page of the printer manufacturer for troubleshooting tips and workaround solutions.

• Eny HP 4520: Printing problems in word Document with photo

  I just purcahsed a HP Envy and I use the function print via the wireless option. I have a word document that I was able to print in the past which has an image inserted into the document. All in the words fine printing copies only the upper left photo f. When I show preview before printing, it shows that if the whole of the document will print correctly and the image should print very well... I have attached what print preview looks like and what actually prints

  Hi @dmanyeah,

  Thank you for reaching out to the forums! I understand that you encounter printing problems in Word, the full image is not printing. Thanks for providing the screenshots. I'd love to help you.

  Try to print a picture from another application to see if you have the same problem.

  To exclude the driver, install a generic driver to see if you have the same results.

  • On the computer, go to start, devices and printers, right-click on your printer and select printer properties.
  • Click the Advanced tab and click new driver, and then click Next.
  • HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings. (you can always go back and revert to the original printer driver)

  What version of Word are you using?

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• Printing problem on deskjet 4510 with windows 8.1

  I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

  I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

  I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

  I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

  Help, please.

  Hey @rshri7869.

  Welcome to the Forums of HP Support!
  
  I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

  How to add another driver:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "Devices and printers"
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 4510
  14. Click OK
  15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
  18. Press apply and OK
  19. Try to print!

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• How can I fix printing problems?

  IE prints OK but does not print Mozilla
  I'll have to delete Mozilla if I can't print.
  Please notify

  Operating system

  Win 7

  Hello Pitasi Marty,

  Many printing problems can be resolved by disabling print.* in all preferences: config. Here's how:

  1. In the text filter box, type print.
  2. Right click on each remaining parameter, and then select Reset.

  Try to print again and see if the problems still happen!

  Kind regards
  Tobbi
  Firefox Support volunteer