7510 all-in-one: paper weight

I need to print on 80 lb. cover stock 212 gsm 10mil thick. The 7510 will support this?   Thank you

Thank you very much!!  I've been on a huge search.

Tags: HP Printers

Similar Questions

  • The 7510 all-in-one can be connected to an iMac by Bluetooth instead of Wi - Fi connection?

    The 7510 all-in-one can be connected to an iMac by Bluetooth instead of Wi - Fi connection?

    Hi johnrpiano,

    No, the 7510 does not support bluetooth connections.

  • PSC 1315 all-in-one: paper jam

    My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

    Thank you

    Oldfud

    Hi @oldfud

    Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

    It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

    If you have any questions, or if this does not resolve the problem, let me know.
    If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

  • Signal repeated on Officejet 6310 all-in-One paper jam

    My all-in-one OfficeJet 6310 repeatedly says "Paper jam" when there is no paper jam, and I have to keep pressing OK until the printer prints.  Sometimes the back panel pops out and I have to re - insert.  Sometimes the paper (I use HP paper) feeds wrong on one side and jams.  Usually before the printer indicates "Paper jam" there is a dull inside, as if the printer is going through a series of internal cycles. Then a blank sheet of paper feeds through.  This printer, renovated, was sent to me by HP as a replacement in 2007.  It works fine on the copy, scan and fax.  Printing is the big problem.  All the answers?  I can't see all pieces of paper or something in the printer.  I use a HP Pavilion Notebook PC DV4307cl with Windows XP.

    Hello

    Congratulations... :-)

    Help the community by marking this post.
    Your question has been answered? Mark it as an acceptable Solution.
    See a great post? Give a Kudos!

    Best regards, Jabzi

  • HP Deskjet 1511 all-in-one: paper size custom unsupported: 1511 HP all-in-one

    HELPPPP!

    The problem...

    Personalized my paper size: 10.7 x 13.9 cm (close to 4 x 6, but it is not). I need to create the MS Word template so I can print on these fill-in guest: http://paperprovision.com/product/champagne-hors-doeuvres-invite-set/

    Here is what happened:

    1. I already configure the custom size according to Assembly HP - for Mac instructions (from this link: http://support.hp.com/us-en/document/c03890386) see my screenshot below.

    2. I did everything up to step 5 (http://support.hp.com/us-en/document/c03890386), BUT THEN I discovered my custom paper size No IS NOT SHOW ON THE DESTINATION TRAY? (see photo below). WHY IS IT?

    The strange thing is... it DOESNT SHOW UP in the paper handling, but it appears on Page Setup > paper size (see below for reference). Or is it not the same?

    in any case, I tried to ignore this misshap and print anyway. Then there is... pop up custom paper size projection, not supported in selected status bar. I don't understand...

    Why my custom size not shown in the list of paper handling? How to present it?

    All HELP... Thank you!!!

    Hi @cfransisca,

    Thanks for getting back to me.

    Do you get errors when you check and repair disk permissions?

    If so, I'll keep repair disk permissions until it corrects all errors.

    Apple updates are up-to-date?

    Step 3: Check and repair your Mac disk permissions:

    1. Open Macintosh HD and go to Applications
    2. Go to the Utilities folder
    3. Open disk utility
    4. Select the hard disk volume, you use (usually on the left)
    5. Select verify disk permissions
    6. Once this process is complete, select repair disk permissions

    You use an external HARD drive?

    I would have suggested to search through these discussions for a possible solution. Please use your own discretion. Otherwise, I suggest you contact Apple.

    http://www.wikiguga.com/topic/a8e144de89855b7fe5429961dd33e1d9

    http://forums.MacRumors.com/threads/system-extension-cannot-be-used.1774893/

    If you have additional questions, feel free to contact me. Thank you.

  • Untrusted connection setting new place of the HP series Photoshop 7510 all in one

    Help, please!  I got my new HP Photosmart 7510 series all an all set up and working for a few days.  Today, I tried to scan a document and the screen shows that I have to make sure that the software is installed and do not forget to enable analysis of the it function.

    As noted, I am to the tab settings for the Web site; Next safety, window appears "redirect to a secure page", followed this connection is Untrusted.  You asked Firefox to connect safely to xxx.xxx.xxx.xx (IP address maybe), but we cannot confirm that your connection is secure.

    The certificate is not reliable because it is self-signed.
    The certificate is valid for HPB54D6D

    I don't know what to do with it.  He has never appeared before.

    Thank you for your time...

    Hello

    It is a message from your browser security something trying to open without a signed certificate. Usually this means that you should stay away from him and close the page, however as you know its your printer, you can trust the source and choose to continue. There should be a given option to continue so just click on it.

  • HP Officejet 5740 e all-in-one: Paper jam hp Officejet 5740 e in a series

    Trying to find the experts today to help me clear a jam paper at the back of my printer.  It is not accessible and the back seems to be sealed, unlike other printers that have a removable back at the factory.  Hope I found the right place.

    Hello

    You can access paper jams from the bottom of the printer, instead of the back/rear:

    1. Turn on the printer, if it isn't already on.

  • HP 7510 all in one will not update

    In the public services section of the software that came with my printer is a button called "HP Update". I guess it's to update the machine with the latest drivers, etc.. When I press the button I get an error message telling me the following

    "The request has failed for lack of software library. You may need to reinstall the application again. The application will exit HPSU-0004»

    I tried to update from the original disk, but I can't because the software is already installed and will not uninstall as far as I can see. I was unable to find anything on the support section of the HP Web site. All tips would be appreciated.

    Hello

    Thank you for your response. I was able to overcome that now. I put the laptop, just as I had become bored with the whole bloody thing, but this morning I tried again to remove the HP Update program and this time it did delete. I just installed again from the disc, and now everything's fine. Thanks again.

  • 7510 all-in-One printer goes offline as I am trying to print (Snow Leopard)


    Hello

    It seems that the multicast DNS communication is not stable, a network protocol required by Apple devices to maintain a correct network communication using Hello.

    Not no matter what IP multicast router, support and maybe disabled by default or require an update of the firmware.

    Please specify your router model and the current version of the firmware on your router (if possible)

    Then it might help to give you more advice where to check.

    Kind regards

    Shlomi

  • which way until I put A 4 photo paper in my 7510 HP printer all in one

    Hi, what sense until I put A 4 photo paper in my 7510 printer all-in-one with a duplex system?

    The paper must be loaded into the tray with the side to be printed facing down.  The duplex setting is not compatible with the photo paper, you can select single sided.

  • don't use paper photo 7510 e - all - in - one with ePrint

    When I print from my Smartphone to my 7510 e - all-in - One - C31using ePrint, photographs always print on photo paper.   How to print on paper with ordinary letter, by default?

    The 7510 will always send ePrint default photos to the photo tray. It is a normal feature. However, you can set the ePrint Mobile application to send pictures to the tray paper. Open the application, select 'photos', select the photo you want to print. Click on print, then select the settings in the upper right of the window. Here you can select the paper size and adjust accordingly.

  • "HP Photosmart all in one single 7510: print greeting cards 5.5x10" on hp photosmart 7510

    "Unable to understand the print size of greeting card size full page stock measure 5.5x10.

    Hi @artdahlink,

    Thank you for joining the Forums of HP Support!

    I noticed that you are unable to print a 5.5 x 10 greeting cards on your HP Photosmart 7510 e-all-in-one printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand the frustration you feel. Please see the Specifications of printer for HP Photosmart 7510 e-all-in-one printer series.

    Maps:
    Card type / size chart

    • 3 x 5 Index / 76.2 x 127 mm (3 x 5 in)
    • 4 x 6 inch Index / 101.6 x 152 mm (4 x 6)
    • 5 x 8 Index / 127 x 203.2 mm (5 x 8 in)

    NOTE: According to the specifications, this printer does not accept a 5.5 x 10 (cards).

    There is no guarantee the implementation of a custom paper size to work, however, you can try this method

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • All-in-one OfficeJet J4550: only a fraction of the feed photo paper

    I am trying to print photos of 4 * 6 using HP photo tip on an OfficeJet J4550 paper.  Sometimes it works but most of the time after the initial report pull in the paper and the printer starts to print, paper only continues to fuel in about half of the way through the printing process.  So I find myself with half right of the image about half left of the document.  Sometimes I get two-thirds of the image and sometimes only one third - it varies.  The part of the picture I get is really good!  Any ideas?  Thank you.

    Hey @Steve2034, welcome to the Forums of HP! I'd love to help you to print photo 4 x 6 of your Officejet J4550. I understand that sometimes you can print a photo 4 x 6 full, but most of the time that the book fails to pass correctly so you end up with a partial impression. This happens when you print on 8 x 10 or any other photo paper? What happened when you print documents? Could you please try to make a copy of the photo of a photo 4 x 6 in order to test the equipment and eliminate the software/driver?

    Although you may be able to print documents, and assuming that it's a hardware problem, please complete the solutions suggested, presented in the following document: HP Officejet J4500/J4600 all-in-One Printer Series - Error Message "on paper" and the printer is not Pick Up or paper feed.

    I don't think you see an message to document your description, but the options presented in the document above could solve the problem you are experiencing.

    If the question is indeed solved, please click Accept as Solution button below. If however, the problem persists, let me know and post back with the answers to the above questions.

    Thanks, I look forward to hearing back on your part.

  • 1209: loading paper HP inkjet all-in-one

    I need to know how to load paper in my all-in-one, inkjet 1209.  It was my husbands printer.  He died so I can't ask him.  I tried to find the answer online, but I can't find anything.  I hope someone can help me.

    My condolences on your loss.

    The document here can help to load the paper for your HP PSC 1209.

  • 1315 all in one printer: my 1315 all in one printer shows "paper jam".

    My 1315 all in one printer shows "paper jam" even if I can copy directly, and it has good connection with the computer, there is no jam. I also changed the ink cartridges to see if that helps - it is not.

    Thank you for your help. I tried everything, but it didn't work. In the end I tried to change the port to USB port on the computer and we are back in business. The printer was the problem, it is the port. I hope this helps someone.

Maybe you are looking for