8.1 non-accessible Windows computer enterprise network error is failed to connect on behalf of the target is incorrect. other computer os is windows 7 Professional

Similar Questions

• Windows 10 fatal error: Acrobat failed to connect to a DDE server

  Today I couldn't open a pdf document by double-clicking on it in Windows Explorer. Apparently, nothing happened. Finally, I opened right click and chose with... Chrome. It worked. The default value is Adobe Acrobat Reader DC. I found later, after the closure of the browser widow, dialog windows three under. Said dialog boxes "fatal error / Acrobat failed to connect to a DDE server.»

  When double checking so that writing this post, I found that by double clicking on a PDF document opens on board - and that works too. Right-click, context menu's 'Open' in the top of the page and more restraint, 'Open with->' and Adobe Acrobat Reader ms at the top of the submenu.
  I just tried the Adobe Acrobat Reader DC selection and nothing I happening. I reduced all the windows one by one to see if a dialogue window appears, but no.

  Googling the error message turned up a suggestion to set a registry entry, but the entry was already the suggested value: HKCR\acrobat\shell\open\ddeexec\application: default: REG_SZ: AcroViewR10,.
  
  

  What type of server Acrobat tries to connect with? How to? Acrobat Connect to the Explorer window for the file name?
  With no information to go, how you can help out us, other than the nuclear option: reinstall everything?

  Thank you

  Hi Cacadriil,

  Please see the steps described in this thread for similar problem: I get the 'acrobat fail send a DDE command'

  Check if this may help solve the problem.

  Kind regards

  Meenakshi

• When I start my computer I have the error message: "failed to connect to A Windows Service.

  A few days ago, I received this message by turning on my laptop:

  "Could not connect to a Windows Service - Windows cannot connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  However, when I go in the view of the event log, the "Event Viewer" window opens and I get this error message:

  "The event log Service is unavailable. Check that the service is running. »

  There are several other programs that will not open not because the message "failed to connect...". "appeared.

  I received help with back - light to the Windows event log. Everything was going well until I arrived at the end status section, instead of saying "started" it said "stopped". I've changed the status in the direction of "on the road" and then received the following message is displayed:

  "Windows could not start the multipoint Windows event log on the Local computer. Error 1747 - the Authentication Service is unknown. »

  What should I do now?

  Hello

  I suggest you follow under method that can help you solve your problem:

  Method 1: try to make the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Satellite L670 - 1 DL-after to enter the network key, it fails to connect

  I have a nine L670 and want to connect to my WIFI at home (Fritzbox) access point.
  Realtek RTL8191SE WLAN card can see the WLAN, but as I enter the security network key it fails and does not connect to the WLAN. I have an older laptop in parallel to check that the WLAN router is working and that the PC connects to the router.
  I use WPA - PSK / 802.11 g.
  Realtek version is 2015.1.427.2010.

  Help, please!

  Christian

  Hey,.

  Are you sure you entered the correct key of WLAN security? Maybe you typed wrong then you should check it again.

  Otherwise, you can try to update the WLAN driver. New driver WLAN, you can download from the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN

• Update wireless network errors, but everthing else connects very well

  I have a BDP-S3100 that always gives me the following error message when I click on "network update": "

  "The State of the connection cannot be confirmed.  Unable to communicate with the server. Please try again later. »

  I have a wireless internet and other applications work fine.  Network connection status shows the wireless connection and the Internet like OK.

  I guess I need to update the network function of work in order to update the firmware if necessary and receive alerts when a new update is ready.  I was very upset to find my firmware was outdated and I had to burn a disc to manually update a Sony's Web site download.  So far, this isn't a machine that is easy to use, and I feel bad for the owners 'mom & pop' who have no idea how to install an update manually.  (You Tube would not work until I did the update).

  As all other wireless connections work fine after the last firmware update, anyone know why the "Network Update" feature is always a failure?  I hope that this is the Sony side, things, and they have server problems. But I fear that if this is the case, no one at Sony is aware of it.

  
  

• share a video from my computer to my laptop via the public folder, the error message: failed to connect

  Computer is Vista's Window and laptop is Windows 7, I turned on the sharing of files and public folders under Network Center and sharing. He said that I have a connection every time failure.

  I want to share a video from my computer to my laptop via the public folder.

  Hello
  You can view these methods:
  Method 1:
  I suggest you to turn off the firewall and any security on your computer program and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:
  Troubleshoot "access denied" when opening files or folders
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders
  See also:
  Sharing files with the Public folder
  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

• How can I correct gateway is accessible, but cannot receive network traffic on internet

  I have a Windows 7 laptop. All my drivers are up to date. It happens every 10 to 15 tion.  When problem he pulls it only resets my wifi. Then it will happen again. I reset my router already. I pass the channel for my wifi. I have uninstall the anti-virus software.  I'm stuck here please help.

  How do i fix gateway is accessible but cannot recieve network traffic from internet
  

  Hello

  I appreciate the efforts to try to solve the problem. You might face this problem because corrupt or the network driver. You could also face this problem because of the incompatibility between the IP address. Please write us with the following details.

  1. What is the brand and model of your computer?

  2. You did it all changes to networking prior to this problem?

  3. Do you have an error message when you try to access the Internet using a browser?

  I suggest you follow the steps below.

  Method 1: Run the network troubleshooter utility.

  Click on the link below and run the network troubleshooter utility. Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save you time and effort.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Check the question and proceed to the following method if you are still having problems.

  Method 2: Try resetting the TCP/IP stack.

  Click on the link below and follow the steps as for Windows 7 in the section I would like to fix it myself.

  How to reset TCP/IP using the NetShell utility.

  http://support.Microsoft.com/kb/299357

  You can also follow the steps in the tutorial below. It contains the methods of troubleshooting issues related to the network database.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue and the details asked. We will help you.

• Computer target hung and RDP held while making the Office remotely in Windows XP Professional

  Hello

  I have problems with Remote Desktop for Windows XP Pro SP3. The scenario is as follows

  1. Target computer is Windows XP Pro SP3
  2. Client PC also has the same OS
  3. With the RDP Client, computer target hung. On the client, it is show as trying to connect and continues for a long time
  4. On the target pc, even keyboards and mice do not work
  5. Any application working on the target computer is also get hanged
  6. The only way to normalize the target computer is restart

  Under Remote Desktop, we have already given all the required permissions. Please note that

  • The firewall on the target computer is OFF
  • Symantec antivirus is installed
  • RAM is more than 2 GB
  Can someone advise me on this?
  Thank you.
  Kind regards
  Feraud

  Hi Feraud,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that the remote desktop connection is blocked on the target computer.

  I will certainly help you with this issue.

  Here are some methods that you can try in order to solve the problem.

  Method 1: Temporarily disable the antivirus from Symantec and check.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Change the listening port for remote desktop and check.

  http://support.Microsoft.com/kb/306759

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  For more information, see the links.

  The problems of desktop remotely

  Note: Applies to Windows XP

  How to use the Windows XP Professional Remote Desktop feature

  If the problem persists or you have any other questions about the remote desktop connection, do not hesitate to let us know. We will be happy to help you.

• This could be the cause I have to continually reset the network adapter named local area connection?

  Hello

  I think I have to click on the network icon in the taskbar at the bottom right of the computer. To connect to the Internet, I have to reset the network adapter named "Local Area Connection" every time.  The computer can be idle for 30 minutes or more, and the adapter needs to be reset.  I have road runner cable internet and the operating system Windows Vista HP computer n about 3 years.  Have no idea?

  Thank you all for your help.

  Ryan

  Try this: configuration panel, Device Manager, expand network adapters

  Double-click your adapter LAKE, the power management tab

  Uncheck the box;   Allow the computer to turn off this device to save power, OK

• I can not connect via Adobe Acrobat Reader DC. Error: A network error has occurred trying to connect.

  We have recently sign up for Adobe Acrobat DC plan. We can sign without problems via Safari Web browser. When we open a PDF using Acrobat Reader DC and click the sign-in link, it freezes the reader and displays an error: A network error occurred trying to connect.

  We try to modify the PDF. We need to use Acrobat Pro to be able to edit the PDF file? We run MAC OSX 10.10.3. I thought that maybe it was blocked and turned off the firewall, but it gets the same error. I checked the version of Acrobat Reader and it is running 2015.010.20056. Don't know what else to try.

  Hi robertm7044538,

  Yes, you must install Acrobat Pro application to edit PDF files. Reader is a different application and you cannot edit PDF files in that.

  You can install Acroabt from here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  However as it freezes while opening the PDF file, please see this KB for help doc: https://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html

  Let us know if you need additional assistance.

  Kind regards

  Meenakshi

• Network error [10061]

  Hi all

  Can someone help me with this question.

  Hyperion 11.1.2.2

  Error network [10061]: unable to connect [abc: 1423]

  Error: 1030818: failed to connect. Please check if the server and port are correct. If you receive timeout or handshake failure, please check if you have tried to connect to secure the port without keyword secure or disable the port with the secure key word.

  Thank you

  Vivek

  Vivek,

  If you want to re - create the file dry, simple deletion or s displacement current location (ARBORPATH/bin) file and start the services essbase.

  This will create the new dry file for you.

  Note:-all variable and custom filter must be re - create message generating the new file dry.

  I hope that helps!

  See you soon!

  SH! going

• Windows 7 starter, no internet access, WPA2 Enterprise Network

  I use an Asus EeePC for the first time to work.  I replace my ibook apple that I had no problem with in the past. I entered the correct name for the network.  has selected WPA2-Enterprise, AES encriptación.  Using the PEAP authentication.  After entering my user domain\username and password, I connect to the network, but when I look at the network he says no internet access.  I can see my internal network and the computers.

  Any advice would be greatly appreciated.

  Thank you

  Hi Kbpipes,

  First check the edition of Windows 7 installed on your computer, since you mentioned that you use the Windows 7 starter edition. Windows 7 starter edition will not be able to join the domain network. To join the domain network, you will need to install either Windows 7 Professional, ultimate edition.

  Access the link below to learn more about the field of Assembly.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/domain-join

  To verify which edition of Windows 7 is installed on your computer, follow the steps below.

  1. Click Start.
  2. Right-click on computer and click Properties.
  3. Check the information on your computer.

  However, you try to run the troubleshooter from network built into windows 7 and check if it can help solve you the problem of connection to the Internet.

  Access the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  You can also try to temporarily disable the security software of the computer and try to connect to the Internet. If you are able to connect to the Internet, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Also, you can try to start the computer in safe mode with network and check if you can connect to the Internet. To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  You can also contact your network administrator and check if there are settings that must be changed or configured to access the Internet.

  Post back with the above information and let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is anyone know the device driver network right to install on a Hewlett Packard desktop computer that is running Windows XP Professional 2002?

  The network for computer device driver installation

  Did anyone know the right network device driver to install on a Hewlett Packard desktop computer that is running Windows XP Professional 2002 and he seems to have a processor Intel Pentium CPU RF?

  You can start here:

  http://WWW8.HP.com/us/en/support-drivers.html
  You know do. But you must also give us the model and model number!
  Example:
  HP Pavilion a6827c
  A guide on finding drivers:
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=bph07165
  More information:
  Guide to finding your product number

• How many computers can network a drive on a computer on the network using Windows XP Professional?

  How many computers can network a drive on a computer on the network by using windows xp professional

  Hello StephenM007

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Server and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• I bought a laptop computer with non-genuine windows 7 I have the windows xp product key pro, etc. from the bottom of the laptop, but I do not have the windows xp pro cd.

  I bought a laptop computer with non-genuine windows 7. I have the original windows xp product key pro, etc. from the bottom of the laptop, but I do not have the windows xp pro cd.  Help me, please!

  You will need to either buy a version authentic retail Windows XP, with its key sales, to a true scource or visit the site of laptop manufacturers, support for your model and see what versions of win are taken care of, then buy a commercial version of this o/s.

  The key on the base of the laptop is the recovery key that requires that the recovery disks provided by the manufacturer.

  You could phone manufacturers to support to see if they have the origonal recovery cd send you, for which it maybe a small fee.