(8500 a) printer sharing

Similar Questions

• Printer sharing via LAN - EPSON XP-335

  Hello

  We use 3 Macs connected via LAN (Ethernet, we do not use Wi - Fi).

  I have connected an EPSON XP-335 via USB to Mac #1, and it prints fine.

  On all Macs, I installed the software EPSON printing and active "Sharing printers", via preferences > sharing.

  but when I try to print from Mac #2 or #3 I get this message "not connected":

  

  What should I do?

  Thank you very much.

  Hi coxorange,

  Please use the Apple Support communities for help. From your post, I understand that you are unable to access the printer that is connected to one of your iMac, others in the House. I know it's nice to be able to print from all of your devices, so I'm happy to help you to provide advice for this.

  From the information you provided, it seems that there is some confusion about the way the printer is shared on your devices. In order to have a shared printer, you must only share from the computer to which it is connected. From there, you can connect to this printer with other computers. Perform these steps on the iMac to which it is attached:

  How to share a printer:

  1. Open sharing preferences if it is not already open (choose Apple menu > System Preferences and click Sharing), then check the box print sharing.

  2. Under printers, select the printer you want to share.

     When you share a printer, all users on your network ("everyone") can use by default. If you want to restrict access to specific people, go to steps 3 and 4.

  3. Click on the button Add at the bottom of the users list, and then do one of the following:

     • Select a user in users and groups, that includes all your Mac users.

     • Select a user from the network or users groups network, which includes everyone on your network.

     • Select a person in your contacts. Create a password for the person, then click on create an account.

  4. When you add people to the list of users, access to the shared printer is reset to no access for the users of your network ("everyone"). To provide access to everyone again, click the triangles, then choose can print.

  Source: OS X El Capitan: share your printer

  Once the printer is shared, you'll want to implement on your other computers. Check out the second section of this article, titled "Add a Wi - Fi or network printer":

  OS X El Capitan: Add or remove a printer

  If you continue to have problems with your printer setup, here are some additional articles that may help you identify the problem:

  OS X El Capitan: print troubleshooting

  Troubleshoot printer on your Mac

  I hope you have a great rest of your day, cheers!

• T61 file Microsoft XP - pro and printer sharing uncheck on Intel(r) 82566 NIC M after reboot

  I check the file Microsoft and sharing printers, but after reboot it is not checked for Intel (r) 82566 NIC connection profile M.

  Anyone else seen elsewhere or fixed?

  Problem setting in the section security for the profile in Thinkvantage Access Connections; He was set to cancel Microsoft File and printer sharing.

• HP Deskjet 5550: Printer sharing via Router/USB?

  So, I have an ASUS router with EZ printer sharing function. I have connected my printer to the router via USB but I can't find the printer in windows. When I surfed in to my router, I see the printer via the firmware on the router and the router has detected my printer model.

  I tried with the only available software for my printer, nothing helps. I also downloaded a software from ASUS, same progress. Any suggestions?

  Router ASUS RT-AC51U

  HP Deskjet 5550 printer

  10 Windows 64-bit computer

  Apparently I had to install an ASUS file on my computer, I just tried to run WinRAR. Problem solved!

• 8500 A910g: double sided printing no longer works on 8500 A910g printer using Mac

  Can someone help - double-sided printing stopped working on 8500 A910g printer using Mac?  I used to be able to toggle the menu layout on the printer, but now it is gray out and one side only the default

  Thank you, Rob

  Hi @robgit,

  Please check back with the results of your efforts.

  You may need to configure the automatic duplexer in the HP printing software.

  Discover sone of the procedure described in this document - printing on both sides of the paper (duplex) (OS X). Note: This model of printer supports automatic duplex printing. Scroll down to "How do I duplex automatic if my printer takes in charge?" in the FAQ section.

  Please let me know if it helps.

  Thank you!

• XP Pro SP 3 firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected

  I am running XP Pro SP 3 on a working group. I'm trying to access the files from a Windows 7 machine on the same workgroup. But the XP firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected. When I disable the XP firewall, all right.

  Here are a few entries in the firewall exception log file:

  2012-06-01 09:53:25 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:26 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:27 DROP UDP 192.168.2.2 192.168.2.255 138 138 202 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:29 DROP UDP 192.168.2.11 192.168.2.255 138 138 202 - RECEIVE

  I did some research on another site, and I came up with the FIX for this issue. It has to do with the node XP somehow getting ready to type "Peer-to-peer". I applied the fix in this article:

  http://support.Microsoft.com/kb/903267

  and the problem is now solved.

  Please come back and let everyone know how you fixed the end!

  However, the fact that this has happened and you don't know how concerned me (if it was my machine).

  Here's what I propose for extra cleaning:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  Hello

  1. don't you make changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. What is the full and exact error message?
  4. have you set a password to the shared printer?

  Please answer these questions and provide us with more information. This could help us help you better.

  See the articles that may be useful.
  "Access denied" error message when you print to a network printer, or view the properties of the printer
  http://support.Microsoft.com/kb/307053
  Cannot use network printer if your password is not saved
  http://support.Microsoft.com/kb/312055

• Problem to a file/printer sharing network.

  Hello

  I want to do a network to share files, printer and internet. I have already shared the internet by all connection to the access point devices through wireless and connecting the access point to the cable modem, but I can't share any file or folder.

  I tried many things to create a small network of win xp, but I failed.

  I have a wireless access point Dap1150 D-Link wireless modem 1 billion for the ADSL2 +, a PC (win xp) with a normal network adapter and an external wireless LAN adapter + a laptop (win 7) which has two cards and support network wi - fi.

  Please help I have searched a lot but I couldn't find anything useful.

  H

  Assuming that the "billion for ADSL2 wireless modem + ' is a router, and it is configured as one.

  Since you have a Windows 7 computer too, the network must be configured take into consideration.

  -------------------------------

  Maybe this can help.

  ---------------------
  

  The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• My Hp photosmart printer shared 6150 isn't printing. I can print the test page.

  My Hp photosmart printer shared 6150 does not print. I can print a test page. Cannot print from Notepad. Recently reinstalled McAfee security and uninstalled RegCure and Xoftspyware.Failed say error documents. Printer, port, etc. can be found.

  (1) resources for the resolution of the printer in Windows XP problems:

  http://support.Microsoft.com/kb/308028

  (2) Troubleshooting for when you cannot print in Windows XP:

  http://support.Microsoft.com/default.aspx/kb/314085

  MD MOEEN AJAZ KHAN - MCP, N +, A +.

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I network a Mac and a Windows 7 set for printer sharing computer?

  I have a desktop computer with Windows xp, 32-bit, one with Windows 7 64 bit and a Macbook, can I configure them on a network to share a printer using my wireless D-Link hub?

  original title: home network

  Hello

  I suggest you to see link below and check if it helps.

  Networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows-vista/Networking-home-computers-running-different-versions-of-Windows

  Install a printer on a home network: http://windows.microsoft.com/en-US/windows-vista/Install-a-printer-on-a-home-network

  File and printer sharing: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/File-and-printer-sharing-frequently-asked-questions

  Hope this information is useful.

• HP series 8500 909 printer offline

  I have a new HP 8500 wireless printer. Setup was easy and the printer and wireless worked well. However, after some time, Windows 7, says that the printer is offline. There is no way to reconnect to the printer, even if is not in mode 'sleep' and wireless Internet works fine. The only solution I've found is that whenever the printer offline message, I need to go to the control panel > printers > and remove the HP 8500 and then reinstall it by selecting "add a printer". Needless to say, it is a pain. Anyone facing this problem and find a better solution?

  If it looks like your question:

  After you install the product on a network, you turn off the computer, and then, and the product loses functionality. The product is no longer prints and disappears from the icon of the product in the menu devices and printers in Windows 7 (64-bit).

  Try this fix:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-89191-1&LC=en&DLC=en&CC=US&OS=4063&Product=4022343&sw_lang=

• Impossible to activate VIsta printer sharing

  Any ideas why I can't activate printer sharing? I have a HP932C printer attached to my Vista computer I want to share on my home network. Whenever I have activate printer sharing and 'apply' I get an error message 'the printer settings could not be saved. Could not be achieved. "Error (0x0000007a). I checked the firewall and the printer and file sharing is checked. Thoughts?

  In the networking and sharing;

  1 is your network set as Public or private? Public restricted the discovery and sharing of settings... Private (home or office} allows full of discovery and sharing, but is more vulnerable, unless a good security is used (encryption key, modem NAT or router). Home networks are usually defined as private. Across your network name, click Customize to change the Private setting.
  2. just under Customize, click State view. To the local connection status area will go up. Click on properties. Is file and sharing printers for MS Networks listed and checked? If it is not installed and checked, you can not share.

  Also, is there a password on the account? Vista requires the sharing plan.
  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. Click Start
     The collapse of this image to develop this image , type msconfig in the box start looking for and then press ENTER.
     The collapse of this image enlarge this image

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. On the the general tab, click on Selective startup.
  3. Under Selective startup, turn it off box load startup items.
  4. Click on the Services tab, select him hide all Microsoft Services check box and then click on Disable all.
  5. Click on OK.
  6. When you are prompted, click on restart.

  After the reboot, see if you can share it.

  Also try to activate the 'Administrator' account and try to share from there.

  Also try turning off firewall cand completely Windows Defender.

  ~ Engineer Support Microsoft Scott answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  Original title: "home network".

  0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  That's what I get on my ThinkPad when I try to do the networking. I placed all the parameters correctly: all 3 of my computers are set the same. 2 workstations work perfectly. They can even see the laptop but not to open all files. The laptop can, open same network t itself file. But he can see the whole of the network (including a printer, is told by the way). I, ve gone through all parameters twice. I've even set the C drives to share via the menus of context on each computer. I have visited many forums with none even come close to this problem (they all will tell you how to set the network parameters or they get very technical and over my head).

  I tried with & without a firewall.

  No password.

  I use a wired network.

  Laptop & 1 desktop computer running vista - 1 desktop computer running xp.

  They have all the latest service packs ms & udates.

  Any help will be appreciated.

  These files can be opened by norton or lenovo network setting apps. The settings do not work only in the application of network of vista. Nor can I work norton or lenovo from other computers.

  PS how can I ensure these settings effect may just lan and do not extend to the internet?

  Thank you bb

  I tried new drivers & returned through sharing & permissions, according to Jack, but he was not good. At the level of experience of my computer I can miss something obvious, but I doubt it because I've been very careful in following the instructions. I am experencing other problems with this laptop as well and I'll just get all. I am planing to get back anyway, that's why I needed network. I wanted to Exchange files over the network to avoid having to ' wait & swap "usb drives. Thanks anyway. Thank you BB bb

• File and Printer Sharing for Microsoft Networks-problem

  Hi all
  I use pc (vista HP 32 bit) sharing-i ' ts works great except one problem:
  what I do, the check mark of V in "sharing files and printers for Microsoft networks".
  is disabled / be empty after each reboot of the pc - and I have to manually check and click OK again.
  How can I fix this and make "File and printer sharing for Microsoft networks" checked permanently?

  (I use the network server private & computer browser Services work. I do not use the password protected sharing)

  Thank you

  http://www.Vistax64.com/attachments/tutorials/2609d1232212061t-file-sharing-turn-off-network_connection_properties.jpg

  problem solved:

  It was Lenovo access connection network for lack of security settings.

  Thank you