8600 premium: Premium HP8600 loses the connection to the network

Similar Questions

• HP LaserJet M1522nf begins to lose the network connection

  Hello! I have HP LaserJet M1522nf and I use it for about 1 year maybe, but since last week, he begins to lose the network connection (ping failed, web interface does not work too). To be correct, the printer is connected directly to the network through an ethernet cable, and the cable is perfectly fine. His work when you turn it on and for the next 5 to 15 minutes, but after that it lost connection (tasks start fails).

  I really like using little aid, some perhaps of advice. Any suggestions?

  Hard reset the router to factory settings and reconfigure your settings.  Pass the cable to a different port on the router.  You said that the cable was good... change anyway.  Try now.

• HP OfficeJet 8600 Premium: Scanning to the desktop

  Hello

  I use the HP OfficeJEt 8600 Premium and I would add three computers to the scan function, so when I scan a document, I can choose the computer I would like to than the scan-to-file.

  I would like to know how to configure the folder so that it scans a folder on the desktop, titled 'Scans' against the 'Document' default folder.

  Today, I spent a few hours playing with it, following the instructions on the forum and further research on google. I could program to scan to computer 1.

  I then changed the name of the computer, somewhere in the HP Scan Utility preferences... then on the touch screen of the printer performs, under scan > not scan to computer, NO computer has appeared.

  I would like if anyone can break it down for me. How can I program it to allow all 3 computers connected wirelessly, to receive scans to their individual workstations. ALL 3 are Mac.

  SECOND-

  I want to program this tray 1 can be white paper and tray 2, letterhead. Have not spent time on it yet, but would love if anyone knows.

  Thank you

  CASS

  Hi @cass321,

  I can certainly help you to scan to your computer and edit your destination folder. I understand that you do not want you can scan all 3 of your computers when you scan from the front panel of the printer. Please take a look on the following document, you can find frequently asked questions particularly useful: HP Officejet Pro 8600 Series printer - scanner to a computer, email, memory device, or network folder.

  What about using it the 2nd test paper for paper replacement types, please take a look on the following document, I suspect it will answer questions you might have: HP Officejet Pro 8600 e-all-in-one printer series (N911) - setting up the printer to print and copy of tray 1 and tray 2.

  Please let me know if you have any other questions. I'd be happy to offer further assistance, thank you.

• SG 300-28: duplication of port: loses the network connectivity of the destination host

  Hello

  We have two SG 300-28. On one of them, I have configured the port mirroring because a host behaves strangely. When I create the mirror, the host connected to the destination port is not available any longer, for example, it does not meet a ping. Port source packages appears on the port of destination, but no package intended to be the host itself. East - this behaviour right? I agreed that the host on the destination port is always accessible, as it would be without the mirror.

  Bernd

  HE Bernd,

  Yes. This behavior is just. That's how Port Mirroring works. The host connected to the Destination port loses its connectivity and it can act as a monitoring device using programs like WireShark (and monitor packages coming to and from the Source port (s)). All configurations on the destination port are substituted.

  Let me know if you need assistance,

  HTH,

  Vijay

  Please note the useful messages

• HP1102w continues to lose the network SSID

  My Laserjet 1102w wireless worked fine for about a year.  Now he has started to lose my network connection.  When I print a status page, it shows that it is "connected" to SSID HP8AA7DC, which I assume is the default value of HP, and had no IP address.  I re-installed the printer 3 times in 4 days and it works fine for a day, then the same thing happens.  I am running Windows 7.  To my knowledge, nothing has changed recently other than to have an extra laptop using the network (never printed however).  This could be the cause?

  OK, thanks for that.  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address.  Set the IP Address of the printer to the same as its IP address but replace the latest figures with "250".
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP Officejet Pro 8600 most not recognized on the network

  I have a Qwest DSL Modem/router that has 4 ports on the back.  I use 1 Port on the DSL Modem/Router to conntect to my NetGear router.  I use 2 ports on the router/DSL Modem to connect my printer HP OfficeJet Pro 8600 Plus.  I use 3 Port on the DSL Modem/Router to connect my Brother MFC-7360N printer.  I do not use 4 Port of Modem/router DSL.

  My NetGear router is used to connect all cable (5) computer in the House.

  I was able to successfully install the software from the Brother printer on all computers and can print on the brother of one of the desktop printer.

  I have the HP printer software installed on all computers, but on WIN XP desktop pc I can not detect the printer on the network.  During the installation process, the software detects that the HP printer and the WIN XP pc are connected to two different routers (DSL Modem/Router is detected as a router by WIN XP pc).  On the another desktop running WIN8 or WIN7, it has no problem detection even if the printer is connected to the DSL Modem/Router, while the PC is connected to the NetGear router.

  Someone at - it some knowledge that why I'm having this problem.  The problem seems to be with the WIN XP pc and not the pc WIN7 or WIN8.

  You run a double NAT scenario, is not good.  Simple correction, switch the gateway (modem/router) in Bridge mode, which disables the functions of router and do just a modem.  Now, connect the Netgear router to the bridge and this have to manage all of your Wi-wired connections and.

• HP OfficeJet Pro 8600: Printer is found on the network

  The printer has been working fine for months, and today it is not accessible to the assigned IP address. No computer can print it or find, even when manually enter the IP address, even if the printer is connected (it scans to a network folder and self-diagnosis is OK for the wireless and network).

  Any suggestions welcome.

  Thank you very much

  François

  Hi François,

  Try restarting your router by unplugging its power for several seconds, then let a minute or two to start.

  Restart the printer as well and check for the difference.

  If it does not help click on the network on the printer icon, tap Settings and select Newtork default settings, then try to restart the PC and try to print again.

  Please let me know if this is useful,

  Otherwise I would like to know the exact IP address of the printer.

  Shlomi

• OfficeJet 8600 super slow printing on the network

  I have a Mac with os x installed Lion couple and uses the model of N911a of OfficeJect 8600 Pro. I have updated drivers recently so as current sound properly.

  Here are a few vitals:

  OS - 10.7.3

  Router: Apple Time Capsule

  He's averaging about 3 to 4 minutes per print page from any computer in the network. I guess that's not normal. How can I trouble shoot? I've seen messages on the definition of a static IP address that I do not know how.

  What suggestions do you guys?

  I suggest to set a static IP address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Wireless Photosmart B110 printer loses the network by disabling?

  Whenever I have cut the power to the printer, I find that I have to reset the router anywhere again. The router is a dolls operating on Virgin cable service. The computer is a Medion on windows 7. I have reinstall the printer software that he cured while I went on a stop to test. However, when I used it a few days later he was at square one. Any ideas would be appreciated!

  I want to just say thank you for your help. I went back to the drawing board and downloaded the latest version of the software. Then he reset the router and the printer again added to the network. Pleased to say all seems well, after testing for the last week. I don't know what we're doing without these forums, keeping in mind that they are made up of people smart experiancd ready to give of their time at least competent.

• HP OFFICEJET PRO 8600 PREMIUM: access to the eprint emails

  I have an eprint e-mail address but do not know how to connect and access the messages.

  Hello

  You can't access messages through the address of HP ePrint.

  Address intended to allow printing from a remote location by sending an email to this address, it will be printed as you find listed in the section "What is ePrint" in the document below.

  You can find more info on the HP ePrint service in the following document:

  http://support.HP.com/us-en/document/c03721293

  Kind regards

  Shlomi

• OfficeJet Pro 8600 Premium: centered on the black vertical line on copy the view when using the auto doc feeder

  This just started happening in the last two weeks. Whenever I have to SCAN using the ADF, a black line runs from top to bottom. I cleaned the glass to the left of the flat glass and cleaned the white strip above the glass on top of the printer that opens. The community has it any other suggestions or experience with this issue? The printer is about 2 years old.  Thank you!

  I looked back through the forum and found a great Bob Headrick troubleshoot in 2008. This allows to calibrate the printer has been the answer for me. Thanks Bob!

• I have a windows vista Home premium and want to connect to a network that is set up on a workstation after running windows 7 can not find the network why?

  Why my computer running windows, find a different network than the vista of cant

  If collective housing is installed on the Windows 7 computer, only Windows 7 computers can join a home group.

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  This article describes how to configure files and printers, sharing on a home network with computers running different versions of windows.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Office Jet 8600 Premium: scan using the glass rather than the feed document dumpster

  Hello, I have the above printer and I would like to analyze an old photo using the technique of the flat bed scanner rather than feed the loading of documents. Can help you with this?

  Thank you

  Casey20131

  Sure.  In your scanning software select flat instead of document feeder.

• Lose the network settings after being off

  Hey all,.

  Recently bought just the XPRT and I love it! Fast phone with a soft keyboard. I use the phone in Australia so I use the mode of GMS/UMTS network.

  I want to turn off my night phone to save battery power that often forgot to charge my phone. However, when I turn on my phone it restores the Sprint network mode and turns on the entire guards and disables data connections. So you have to change it every time is a bit boring, so I was just leaving my phone in the night.

  Is it possible to save these settings, so I can turn off my phone at night? Or do I have to leave my phone?

  See you soon!

  Just turn on airplane mode before on you stop at night. Then when you turn it on the next morning they did re - define everything in the app from Sprint.

• Solaris 10 VM loses the network after upgrade tools

  I have a Solaris 10 VM and hit the following problem.

  Solaris 10 after VMware tools install and reboot:

  Lost network device driver module:

  Network device quick vmxnet comments:

  Jan 14 07:37:23 mt-igl-t9 genunix: / kernel/d rv/amd64/vmxnet3s: undefined symbol

  Jan 14 07:37:23 mt-igl-t9 genunix: "mac_lso_get."

  Jan 14 07:37:23 mt-igl-t9 genunix: WARNING: mod_load: could not load module 'vmxnet 3s. "

  VMware Tools 10.0.0 build-3000743

  VMware Tools 10.0.5 build-3227872

  Hello

  I have the same exact issues with Solaris 10, X 86

  The problem has been resolved by following the steps mentioned below.

  Step 1

  Re-install Vmware tools VMware Tools version 9.0.0 build-782409

  Step-2

  Restart the server

  Step-3

  vmxnet and vmxnet3s files take backup

  for solaris servers

  root@solaristemp # cd/kernel/drv/amd64.

  root@solaristemp # cp vmxnetbck vmxnet

  root@solaristemp # cp vmxnet3s vmxnet3sbck

  

  Step-4

  Re-install VMware Tools 10.0.0 build-3000743

  Step-5

  Restart the server

  Step-6

  We copy the file backup instead, we receive re version 10 deamon.

  for solaris servers

  root@solaristemp # cd/kernel/drv/amd64.

  root@solaristemp # cp vmxnetbck vmxnet

  root@solaristemp # cp vmxnet3sbck vmxnet3s

  Step-7

  You will find that VMware tools installed, but working on the guest.

  Step-8

  root@solaristemp # /usr/bin/vmware-config-tools.pl

  

  

  Step-9

  Restart the server

  Once finished, meet us without any problem.

  Although not yet produce a legal solution we observed not another solution.

  Thank you.

  Best regards.