Cisco Telepresence ISDN link with endpoint SX20

Similar Questions

• Requirements of Cisco TelePresence C for landlines and mobile calls

  Hello everyone,

  I have questions about Cisco TelePresence C: I know that you can call to landline and mobile phones as well as these.

  I would like to know more technical details about this:

  -What else should be part of the installation of the TP C series in the case of calls on fixed or mobile? This Protocol must be used (H320 ISDN)?

  Should I also buy Cisco TelePresence ISDN Link - http://www.cisco.com/c/en/us/products/collaboration-endpoints/telepresen... or can I use a gateway and SIP protocol for fixed lines?

  Thank you for the answers.

  Inorder for you make or receive calls to PSTN/Mobile then you will need some sort of bridge. Yes the ISDN link can work if you have a few points of termination.

  If you have more endpoints and activate this cabability for all then a network infrastructure device would be best, such as the Cisco TelePresence ISDN GW 3241

• ISDN link and automatic matching IL1.1.3 and TC 7.2

  Hi all!

  I put the TC7.2.1 registry running on 10.5 CUCM implement Cisco MX700.

  I try to pair with this endpoint the ISDN link with the latest IL1.1.3.

  I followed the documentation that indicates endpoint and ISDN link should be in the same subnet, which is the case (both devices are on the same switch, same subnet, same vlan, no firewall).

  But when I try to manage the devices in order to discover the ISDN link, nothing, endpoint is not able to find it.

  I'll double check on the CLI of ISDN connection If pairing is in auto mode, which is the case.

  I would like to know if there is something missing?

  Thank you

  Gabriel

  Please make sure you have IPv6 enabled on endpoint and ISDNLink.

  Wayne
  --
  Remember the frequency response and to mark your question as answered as appropriate.

• Cisco TelePresence SX20 with laptop

  I use a Cisco TelePresence as autonomous SX20 endpoint configured with a public IP address (in Pakistan). I want to connect a portable computer (to Canada) to start video conferencing using the portable camera. Please advice me the software to install on the laptop so that I can start with my SX20 videoconferencing based on IP configured on my SX20.

  To understand kindly refer to the disposal of partner network.

  Please help me its urgent.

  Hello

  www.ciscojabbervideo.com

  BR Oleksandr

• SX20 with ISDN link and vcs

  Hi all

  I have sx20 quickset with device connection isdn with 4 Numéris.

  I want to register the sx20 VCS also.

  in sx20 there is no secondary network to connect the ISDN connection device.

  How can I configure the ISDN link for incoming and outgoing calls using ISDN link and also I need register sx20 VCS.

  my version of sx20 is 5.1.6 and 1.0.0

  Hello

  Don't you won't need a key for unlocking,

  Thank you

  Ravi kr.

• Telepresence 8 button pairing with the SX20

  Hello one trying to match an 8 touch screen with the SX20 telepresence, in certain moment its request for a user name and password to connect with the SX20, what is this user and the password?

  Concerning

  Leonardo Santana

  According to the Touch 8 Installation Guide (page 4), it is the login admin for your codec.

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/touch/installation_guide/touch_for_c-series_installation_sheet_for_web.PDF

  Did you change the account or the password admin since installing the SX20?  A way to test is to try to log into the SX20 with username admin and leave the password empty.  If you are able to connect with a password blank or empty, that no password has been defined yet, I advise you to define for this purpose.  If you try to connect and get connection failed with empty or empty, password a password has been set on the admin account.  You may need to consult someone if you don't know.

• Cisco telepresence sx20

  Dear support team,

  I want to know how to configure cisco telepresence sx20.

  any body can help pls...

  Configuration Cisco Telepresence Sx20 is not easy to do. I think below link will help you for configuration.

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/quick-set-SX20/TC5/administrator_guide/sx20_quickset_administrator_guide_tc51.PDF

• Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015

  Nice day! My name is Dimitri! Have Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015. Is it possible to set up a conference call SFB and appeal to all subscribers of this conference? At present, we can only call on a single client and SFB. We have the current version of the software TCNC5.1.4.295090 SX20 - is it possible he obnoviti 7, and it will help to improve the situation? Thank you!

  I'm no expert on this technology, but I have some idea and already deployed some projects dealing with the integration of Cisco (CUCM, VCS) video infrastructure to Microsoft video infra like Lync. It would be the same process to make it work in your case.

  How does your deployed SFB? How do you do a conference for audio and video, participants can join the conference by dialing?

  • Mediation server would be required as a front-end server for you to integrate IP/PBXS using SIP trunk to enable voice (audio) Conference with the participants to the PSTN.
  • AVMCU Should be (Audio video Multipoint Conferencing Unit) will host the video conference that will include video endpoints as participants.
  • Video of Interop (SCREW) Server would be required to interface your SFB to third video conference infrastructure such as Cisco UCM or VCS for the endpoints Cisco call client SFB of endpoint of Cisco to participate to the conference organised on SFB by dialing the conference number.

  I'd say contact your AM SFB or Support as well for queries about how to plan your infrastructure SFB and direction.

  Kind regards

  Acevirgil

• Video-conference using SX 20 and telepresence ISDn device link

  Hello

  I have a cisco SX 20 and device connection isdn telepresence device. the procedure via below I have configured and coupled unit SX and telepresence

  Step: 1

  address configured static Ip add via remote control.

  Step: 2

  using static ip, I have connection to the SX 20 device, using the browser. (ip 10.1.1.2)

  Step: 3

  Configuration--> devices--> manage ISDN link--> click--> click combined with research

  Step 4

  In ISDN configuration of the link--> I have ISDN numbers entered the repertoire. Subsequently, it works fine.

  Problem:

  End of test, cancel us the twinning of the device and restart the SX 20. Subsequently, we are unable to pair the device of telepresence.

  While click Display message (No. DEVICES DETECTED) the search button.

  Please share the solution on an urgent basis.

  Thanks in advance.

  Rgds

  Vetri

  Did restart the ISDN link solves your problem?

• The upgrade of Cisco ISDN Link software

  Hi guys!

  Miss me something, when you try to download the software on the ISDN link. I have the connected to the PC via a serial cable, I can then go into the API with HyperTerminal and set the root password, but when I try to connect with WinSCP I just get the error ' gethostbyname: unknown error "." I need to enter the hostname of course, this is a silly question probably, but that is the same as the name of the system unit?

  I can't use the URL method since we have no internet connectivity for the device.

  Any ideas would be very welcome, it's probably something very simple that I'm missing. The current configuration is the default value of the plant besides the root password change.

  WinSCP requires that your ISDNLInk and your PC are both on the IP network, it is not copy on a serial connection, you are just using the connection set for call orders.  Similar to the TFTP method (what you can do on your own TFTP server, it cannot be the one on the Internet).

  Another option, which I think the best way to upgrade an ISDNLInk, is to do it via the web interface of the SX20 or some point of endpoints that you use with and you can download the file via your web browser.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Cisco Telepresence SX20 and Touch 8 Configuration after paired

  Hello

  I successfully connected and combined the SX20 Cisco's Telepresence and Cisco Telepresence Touch 8. Before using the 8 key, we used the remote control instead. As a result, I have two questions about this.

  1. as far as I know, when I use the 8 key, the remote control cannot be used. Is it possible to use both of them?

  2. How can I change the background of my SX20 touch 8? Previously, the remote I can easily choose the background for my SX20. But after pairing with Touch 8, background in my SX20 become a blue large clock. I really want to have a different background but cannot find the way how to change.

  Any help would be appreciated.

  Thank you.

  Sincerely,

  Bagus Hanindhito

  After you connect the 8 Touch, you can still use the remote control, you will need to put on the SX20:

  SystemUnit MenuType experimental configuration: full

  I think that the standard background when using a touchscreen device is what you see, blue with large clock.  However, after the MenuType return in full which will give you the full OSD which is used with the remote and not that of the button, you may be able to change the background then.

• matching codec c40 with ISDN link problem

  Hello world

  Would really appreciate if someone can help me with my problem.

  I have 2 sites. Each site has a c40 codec which is connected to a cisco ISDN link box. Each box contains 3 BRI connections. The system is essentially set up at the video-conference from one site to the other. C40 codecs have been paired with boxes of ISDN link manually due to the old firmware. Now that the firmware has been upgraded on all devices, I am trying to pair the codec with the ISDN link using the 'auto' mode so I can configure the ISDN codec c40 GUI link.

  The problem I have is that when I pair it in auto mode, the ISDN link is seen by the codec and matched succesffuly but I get an "error" and the reason for the error is "no sip registered to peripheral H320" or something of the sort. The rest of the configuration is the same, all im doing is pairing in auto mode. At this point, I can't do a video call-out. Can I make changes to the GUI hoewever c40 ISDN link and it shows as paired.

  When I change the sip profile out to 'off' in the sip codec c40 profile settings, now, there is no error. The sip profile in the ISDN link area is also set to off.

  Can someone help me what are the correct settings for outgoing SIP and the above error message please. It will be greatly appreciated.

  Thank you

  Hello

  Outgoing SIP should be turned off if you use the ISDN codec liaison, so please meke it took off.

  for the composition, should not use composition commnad complex that you scoop with TC 5.x and IT 1.0,

  With TC 6.x just enter number and select protocol H320.

  HTH

  Kind regards

  Dharmmesh

• Matching C20 with ISDN link question

  Hi, can someone help me on initial connectivity C20 with ISDN link? I C20 codec with 1 LAN port which is connected to link ISDN endpoint port, the link ISDN of LAN port is connected to the internal network. I configured the IP Link ISDN: XXX.XXX. XXX.251 and codec on XXX.252 both are the same subnet.

  Given that a single LAN port, how can I access the web interface of the codec to check and perform pairing? If in case, the codec is on firmware older supporting not pairing function so how can't I perform manual synchronization. Cannot access the ISDN link by series.

  Hello

  CAN´t you just plug your PC on the network internal (same subnet as the ISDN link and the codec) and access the Web interface of the codec: http://x.x.x.252 ?

  What versions of software are you using?

  / Magnus

• On Cisco telepresence SX20

  Hi telepresence Experts.

  When I connect my laptop with the sx20 and click on 'call tab control' a message presented in the two screens of the laptop. The message is "Snapshots require the option RemoteMonitoring key. Would you tell me the reason and function of 'Ctrl tab call' please...

  Thanks in advance.

  Concerning

  Nizam

  Suggest you take a look at the admin guide - page 10 shows you from everything about the web interface.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Video of Jabber Cisco Telepresence band bandwidth provisioning

  Hello

  We have deployed video jabber cisco for telepresence 4.5 with VCS 7.2 and TMS 13.2.2.  We use jabber to take interviews. The candidates will be sent the link to download the jabber with the required authentication settings. The Jabber is configured with the Public Max and minimum bandwidth of 768 Kbps.

  My question is related to the downspeed of bandwidth. If we configure the bandwidth of 768 Kbps prvosining and internet bandwidth of candidates is less than 768 Kbps will be the Downspeed VCS to accroding appeal to the bandwidth of the network of candidates.

  for example if my internet connection from home is just 512 Kbps and the use of the jabber to make a call to ex90 in my office. Bandwidth settings is preconfigured in the jabber as 768 Kbps. When the call is established will be VCS downspeed the call at 512 Kbps.

  Krishna.

  You cannot configure a minimum bandwidth, which is always the maximum bandwidth jabbervideo will use.

  The user can only set this value downward but not upward, but as the client detects a loss and stores a database

  with information on used networks recently and its quality.

  So, should not be a big problem the faster speeds available and allow the customer to do magic.

  I woud recommend to (re) read the Jabber_Video_Administrator_Guide

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/MOVI/admin_guide/Jabber_Video_Administrator_Guide_4-5.PDF

  This gives you more information concerning automatic bandwidth adaptation and capabilies of bandwidth detection.